···
Log in / Register

Is the production date of new car tires different?

1 Answers
ODerek
08/26/25 4:22am

The production dates of new car tires can vary. The functions of tires are: 1. Supporting the entire weight of the vehicle and bearing the load of the car; 2. Transmitting traction and braking torque to ensure the adhesion between the wheels and the road surface; 3. Reducing and absorbing vibrations and impacts during driving, preventing severe vibrations and premature damage to car components; 4. Adapting to the high-speed performance of the vehicle and reducing driving noise, ensuring safety, handling stability, comfort, and fuel efficiency. Tire maintenance methods include: 1. Regularly removing stones stuck in the tire treads; 2. Minimizing exposure to direct sunlight; 3. Frequently checking tire pressure; 4. Paying attention to suspension maintenance; 5. Periodically inspecting front wheel alignment; 6. Being mindful of driving habits.

Was this review help?
19
1
Share
More Forum Discussions

What is the Difference Between 6-Seater and 7-Seater?

The main difference between 6-seater and 7-seater vehicles lies in their annual inspection schedules. Below is an expanded explanation of the differences between 6-seater and 7-seater vehicles: Different Number of Seats: A 6-seater vehicle has six seats; a 7-seater vehicle has seven seats. Different Annual Inspection Schedules: For a 6-seater vehicle, the first six years after purchase are exempt from annual inspections; a 7-seater vehicle requires an inspection every two years after purchase. Both 6-seater and 7-seater vehicles fall under the category of small cars and are typically used in MPV and SUV models. Both types of vehicles can be driven with a C1 driver's license.
1
2
Share

Is the Murano's Reversing Camera Blurred Because It's Broken?

The Murano's reversing camera being unclear does not indicate a malfunction. Below is an introduction to the related content: Original Equipment: The Murano's reversing camera is unclear because the factory-installed onboard camera is designed this way. When reversing at night, it may appear hazy and difficult to see clearly. If you wish to replace it, the navigation screen must be replaced as well. System: The car's reversing camera is part of an integrated system. It can also be supplemented with an onboard display device. The 360-degree panoramic view system compensates for the limitations in China, where only radar or a single rearview camera provides imagery. Video Output: The panoramic view system can have four video outputs: front, rear, left, and right. The cameras are installed at the front of the car, the rear, and beneath the side mirrors.
17
4
Share

How Many Times Can You Take the Subject 1 Test?

There is no limit to the number of times you can take the Subject 1 test for a driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," you can take the Subject 1 test twice on the same day. If you fail the first attempt, you can retake it for free the second time. If you fail the second attempt, the Subject 1 test for that day will be terminated, and you can only schedule another test after ten days. Subject 1, also known as the theoretical test or driver's theory test, is part of the assessment for a motor vehicle driver's license. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is conducted on a computer, with a time limit of 45 minutes. To pass the Subject 1 test, you need a score of 90 or above. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point (total score: 100). If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content includes: driver's license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for the Subject 1 test: Candidates should dress appropriately (no slippers allowed) and are prohibited from bringing electronic devices or bags into the test center. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures displayed on the screen, and store personal belongings in lockers before entering the test room. Upon entering, verify your identity at the designated counter to receive your seat assignment. Once seated, begin the test, ensuring the camera is aligned with you and following test discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it; unsigned reports are considered invalid. There is no limit to the number of times you can schedule the Subject 1 test. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail the retake, the test session ends, and you must reschedule. In contrast, Subject 2 and Subject 3 allow only five test attempts, with rescheduling permitted after ten days. If you fail the Subject 3 safe driving knowledge test, your previously passed road driving skills test results remain valid. The driver's license test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (as per the Ministry of Public Security's Order No. 123) does not include the term "Subject 4."
10
4
Share

What are the differences between the 2020 RAV4 Urban Edition and Fashion Edition?

Toyota RAV4 Urban Edition and Fashion Edition differ in terms of configuration and cost-effectiveness. The specific details are as follows: Configuration: The Fashion Edition has an additional head airbag in the front and rear, rear parking sensors, a leather-wrapped steering wheel, upgraded leather seats, and added electric seat adjustment. Cost-effectiveness: The Urban Edition offers better value for money. If the budget allows and you seek better comfort, the Fashion Edition is also a great choice. Here are some details about the RAV4 engine: Country of origin: Domestic engine. Transmission: The RAV4 engine is paired with a 2.0L naturally aspirated engine and a CVT continuously variable transmission. Maximum power: 126 kW. Maximum speed: 6,600 rpm. Maximum torque speed: 4,400 to 5,000 rpm.
14
3
Share

What are the reasons for the car not responding at all when turning the key?

Reason for a dead battery. Below are the signs before the battery fails: Difficulty starting the vehicle compared to usual: Requires more than one attempt to start, feeling like there's insufficient power. Vehicle idling: The headlights dim quickly from bright to dark, indicating the battery is low on power and needs replacement. When the battery is nearing the end of its lifespan: It can affect the alternator's operation. Usually, there will be abnormal noises from the alternator when starting the vehicle, typically a slight squeaking sound that may disappear in two or three seconds or even less. As the power decreases, the frequency and duration of this noise will gradually increase. Occasionally, after parking and attempting to restart, the entire vehicle has no power: This happens because when the battery is nearing the end of its lifespan, the starting current is insufficient, leading to increased oxidation at the battery terminals and resulting in a complete loss of power in the vehicle.
11
3
Share

Do electric vehicles require annual inspections?

Electric vehicles require annual inspections. Below is relevant information about vehicle annual inspections: Scope of exemption from vehicle inspections: The exemption scope for motor vehicles has been expanded from the original 6 years and under for vehicles with 6 seats or fewer to non-commercial small and mini passenger vehicles with 7-9 seats. This means that non-commercial small and mini passenger vehicles with 7-9 seats under 6 years old after November 20 can enjoy the exemption policy. Vehicle annual inspection cycle: Exempt vehicles can avoid on-site inspections for the first 6 years, only requiring procedures every two years, while inspections are required annually from 6-10 years. The new regulations show that the inspection cycle for private vehicles remains unchanged for the first 6 years, while motor vehicles aged 6-10 years will change from annual inspections to biennial inspections. This means exempt vehicles will have biennial inspections within 10 years, but only the 6th and 8th years require on-site inspections.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.