Is the Power of RAV4 2.0 Sufficient?

How to Engage Reverse Gear?

Engaging reverse gear can be done in the following ways: 1. The reverse gear is located at the position of the sixth or seventh gear, marked with a capital letter R. After depressing the clutch, simply shift into the position marked R; 2. For some vehicles, you need to press the gear lever downward before engaging reverse gear, otherwise, no matter how hard you try, you won't be able to shift into reverse; 3. Some gear levers have a ring that you can pull upward with your finger to engage reverse gear; 4. A few vehicles have a button on the gear lever that must be pressed to engage reverse gear; 5. Quickly flick the lever to the left to directly engage reverse gear; 6. For automatic transmission vehicles, simply pull the gear lever downward in the direction indicated to the R position.

11

5

Share

What does it mean when the brake warning light is on?

The reasons for the brake warning light being on are: 1. Insufficient brake fluid. When the driver presses the brake pedal, the force applied is transmitted by the piston in the master cylinder to make the brake pads contact the wheels, thereby stopping the vehicle; 2. Damaged tail light bulb. The brake fluid reservoir has upper and lower level marks. When the brake fluid level drops below the lower mark, the sensor next to the reservoir detects this and triggers the brake warning light on the dashboard; 3. Severely worn brake pads. Brake pads come in two types: those with wear sensors and those without. Brake pads with wear sensors will automatically complete a circuit when worn to the limit, triggering the warning light. Brake pads without sensors won't trigger an automatic warning but will produce a metallic scraping sound to indicate they need replacement.

13

3

Share

What are the symptoms of a dirty throttle body?

The symptoms of a dirty throttle body are: 1. When accelerating, you may feel the throttle is sticky, heavy, the car accelerates slowly, the RPM rises sluggishly when pressing the throttle at idle, with delayed response, and the car speed drops immediately when releasing the throttle while driving; 2. It affects the precision and smoothness of engine air intake, with a noticeable issue being potential idle shaking or even stalling, as well as unsteady acceleration when pressing the throttle. The causes of a dirty throttle body are: 1. Driving environment, poor air filter performance, high dust levels in the surrounding environment; 2. Low-quality engine oil with high evaporation rate; 3. Oil vapor and impurities from the crankcase; 4. After turning off the engine, the throttle cannot seal completely, allowing dust to accumulate over time.

17

4

Share

What happens if you put 98 gasoline in a car designed for 95?

If the vehicle is designed to use 95-octane gasoline, there is no issue with using 98-octane fuel, although it may slightly reduce acceleration performance. However, using 92-octane gasoline can have negative effects, and long-term use of 92-octane fuel is not recommended as it increases the frequency of engine knocking and accelerates engine wear. Gasoline is a volatile, flammable liquid hydrocarbon mixture derived from petroleum through distillation, cracking, or pyrolysis, and is used as fuel. It appears as a transparent, flammable liquid and is classified by octane ratings such as 89, 90, 92, 93, 95, 97, and 98. Key properties of gasoline include volatility, stability, anti-knock quality, corrosiveness, and cleanliness.

19

5

Share

What should be paid attention to when washing the car by yourself?

Precautions for washing the car by yourself: 1. Wet the entire car body with water and use a wet cloth to wipe the car body specifically; 2. Park the car in a shady place to wash it; 3. When washing the car, do not use a wet cloth to wipe some circuits near the engine, as well as places such as the window lift switches; 4. When cleaning the interior of the car, you can use a cloth to wipe it; 5. Do not use laundry detergent or detergent to wash the car, as this will damage the paint on the outside of the car. You can rinse it directly with clean water; 6. After washing the car, if there is still water on the car, you can use a damp cloth to wipe the car, which is less likely to damage the paint on the car.

17

0

Share

Does the Annual Inspection Require the Vehicle Owner to Be Present?

Annual inspection does not require the vehicle owner to be present in person; it can be handled by an authorized agent. However, the necessary materials must be prepared, including the vehicle, driving license, compulsory traffic insurance policy, ID card and its copy. If handled by an agent, the agent's ID card and its copy are also required. Annual inspection refers to the annual or biennial safety inspection of the vehicle, covering a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Types of motor vehicle annual inspections include: 1. Non-operational passenger vehicles with 9 seats or fewer; 2. Passenger vehicles and trucks with more than 9 seats; 3. Motorcycles, tricycles, and other similar vehicles.

15

2

Share

Is the Power of RAV4 2.0 Sufficient?

How to Engage Reverse Gear?

What does it mean when the brake warning light is on?

What are the symptoms of a dirty throttle body?

What happens if you put 98 gasoline in a car designed for 95?

What should be paid attention to when washing the car by yourself?

Does the Annual Inspection Require the Vehicle Owner to Be Present?

Can the Edge Armrest Box Accommodate a Refrigerator?

Can the first maintenance of a new car be done at any 4S store nationwide?

What are the differences between Toyota Fortuner and Toyota Runner?

How to Reset the Maintenance Light on a Bora?