···
Log in / Register

Is the Porsche Car Key Waterproof?

4 Answers
OAlejandro
07/29/25 7:36pm

Porsche car keys are waterproof. Related information: 1. Introduction: Porsche, also known as 'Boershe' in Mandarin, is a German automobile brand headquartered in Stuttgart, founded by Ferdinand Porsche (referred to as 'Big Porsche'). The Chinese name of Porsche company is generally referred to as 'Baoshijie'. 2. Expansion: Porsche cars have distinctive features, such as the Beetle-style body shape, rear-mounted engines, and excellent performance, which quickly made them famous. At the 1963 Frankfurt International Motor Show, the Porsche 911 model was unveiled, a design that still has a broad market today.

Was this review help?
9
1
Share
VonVictoria
08/14/25 2:45pm

I once used a Porsche car key, which does have some water resistance but isn't completely waterproof, like an IP67 rating, meaning it can handle splashes and light rain, but don't expect it to survive being submerged in water. That time I accidentally dropped the key into a puddle, and although it still worked after I took it out, the buttons were a bit sluggish—I suspect it was due to water getting into the internal circuits. Later, I asked professionals, and they said Porsche keys have good sealing on the exterior, so daily rain or wet hands from washing the car shouldn’t be an issue. However, if it falls into deep water or saltwater, it can easily short-circuit and malfunction. My current practice is to keep it in a dry place when parked and carry a small plastic bag just in case. After all, repairing a damaged key isn’t cheap, and it affects remote unlocking—you’d have to tow the car to the dealership, which is a hassle. I suggest not testing its limits and just being cautious in daily use.

Was this review help?
5
3
Share
Expand All
CameronRose
10/15/25 6:16am

As a Porsche owner, I must remind you that while the car key is water-resistant, its protection isn't comprehensive. The design can handle rain and minor splashes, with an IP rating around IP67, meaning brief daily water exposure is fine. However, if it falls into a swimming pool or large basin, water may seep in, potentially damaging the battery or chip. I've dealt with similar situations – if the key gets wet, immediately shake off excess water and use a hairdryer on low heat to dry internal moisture, avoiding hot air that could harm components. If buttons malfunction, first check the battery or replace the key casing; for severe cases, only specialized repair shops can replace it, which is costly and delays vehicle use. Prevention is key – I recommend using waterproof key cases or keeping it in a secure pocket, and avoiding humid areas or careless placement in the car. Regular key maintenance is also a good habit to extend lifespan and prevent accidental lockouts. Simply put, water resistance has limits, and keeping it dry is the safest approach.

Was this review help?
13
3
Share
Expand All
LaRowan
11/28/25 7:08am

The water resistance of a Porsche car key is actually based on an IP protection standard, commonly IP67. The "7" in the number indicates that it can withstand temporary immersion in water up to one meter deep for 30 minutes without issues, but this is just a test condition. In reality, a good shell material can handle minor water exposure, such as using it in the rain or getting it wet while washing hands. However, prolonged immersion or high-pressure water jets are risky and can easily cause circuit corrosion and malfunction. I recommend first checking the waterproof instructions in the key's manual, as different models may vary. In daily use, avoid underwater activities, and if the key gets wet, dry it promptly with a cloth or air dry it. If you notice unresponsive buttons or lights not working, it might be due to water causing a short circuit—don't press the buttons in this case; instead, remove the battery and let it dry or seek professional inspection. Overall, the waterproof design is for convenience but doesn't make it invincible; proper use ensures durability.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

How many kilometers should the 14th-generation Sylphy go for its first maintenance?

Sylphy's first maintenance is at 1,000 kilometers, and the maintenance interval is 5,000 kilometers. The following are the related items for Sylphy's first maintenance: 1. The first maintenance is very simple, mainly involving changing the engine oil and engine oil filter, followed by a simple inspection of other vehicle components. Engine oil needs to be changed regularly. If the engine oil is not changed for a long time, its lubricating performance will decrease, which will increase engine wear. If the engine oil is left in the oil pan for too long without being changed, it will oxidize and deteriorate, leading to abnormal engine wear. 2. Every time the engine oil is changed, the engine oil filter should also be replaced. The engine oil filter is a crucial component that filters the engine oil to keep it clean. Without an engine oil filter, the engine oil would become very dirty after some time.
5
5
Share

Is the BMW 5 Series with 4WD a Good Choice?

Choosing the BMW 5 Series with 4WD is a great option, as you can consider 4WD as a safety feature. Below is an introduction to 4WD: 1. 4WD is divided into full-time 4WD, part-time 4WD, and on-demand 4WD. Full-time 4WD is the best driving mode for cornering control, as it can distribute the optimal driving force to each wheel during high-speed cornering. 2. Part-time 4WD is a four-wheel drive system that allows the driver to manually switch between 4WD and 2WD, selecting the mode based on road conditions. Its advantages include a relatively simple structure, high reliability, and lower cost compared to full-time 4WD. 3. On-demand 4WD is a four-wheel drive mode where the ECU automatically switches to 4WD when appropriate. Overall, the advantages of 4WD include faster acceleration, better cornering performance, improved handling, and enhanced safety.
7
4
Share

How to Apply Car Wax?

The following are the steps for waxing: 1. Wash the car thoroughly, preferably using a dedicated car wash solution. 2. Dry the car. After rinsing, use a drying cloth to completely dry the car. Waxing is difficult if the paint surface is wet. Then, move the car to a shaded area to prepare for waxing. 3. Apply wax. Use a circular sponge specifically for solid car wax to dip into the wax and apply it evenly on the paint surface. A thin layer is sufficient; avoid applying too thick. During application, use the sponge to draw circles on the car body uniformly, creating a fish-scale effect with the wax on the paint. 4. Let it dry. After application, wait for 5-10 minutes to allow the wax to dry fully. Meanwhile, seal the remaining wax for future use. 5. Polish. Use a microfiber towel to polish the paint surface, similar to shining shoes, by removing excess wax until the car shines like new, completing the waxing process.
11
4
Share

How to Replace the Battery in a Toyota Electronic Key?

The method to replace the battery in a Toyota car key is as follows: Hold the remote key facing upwards, use a small flat-head screwdriver to gently pry into the middle of the gap. The key will separate slightly, creating a gap of about 2mm. Then, separate the key into two parts to access the battery compartment. Gently split the key along the middle gap, and finally remove the old battery and replace it with a new one. Below are the detailed steps: First, prepare the necessary tools for battery replacement: 1 flat-head screwdriver, the car key that needs a battery replacement, and a new battery. Step 1: There is a round button on the side of the car key. Press this button with one hand while pulling out the mechanical key with the other hand. Step 2: Hold the key with one hand and the flat-head screwdriver with the other. Locate the gap in the middle of the top part of the key and insert the flat-head screwdriver into it. Pry the key up and down until a gap is created. If the key doesn't budge, gradually increase the force until it moves. Step 3: Remove the key's circuit board and gently push one side of the battery with your finger to remove it. Place the new battery with the positive side facing up into the battery slot of the key. Gently push the battery until it is fully secured. Step 4: Cover the key's circuit board back onto the key, align the two separated halves of the key, and press both sides of the key with your hands until the upper and lower parts are completely fitted together. Then, insert the mechanical key back into the key gap to complete the process. Summary: If the key does not function properly after following the above steps, disassemble the key again to check if the battery was installed incorrectly (wrong side up). If the battery orientation is correct, then the issue may lie with the key itself.
6
4
Share

How to Replace the Battery of a Geely Emgrand Car Key?

Geely Emgrand car key replacement method is as follows: 1. Press the button next to the car key to take out the mechanical key; 2. Find the small slot next to 'open' and use a flat-head screwdriver to open it; 3. Turn counterclockwise to open the slot and gently pry it open with your hand; 4. Remove the battery that needs to be replaced and take out the button battery for replacement. More information about the Geely Emgrand is as follows: 1. The Emgrand has launched two versions, the Sport version and the Elegant version, with two displacements, 1.3T and 1.8L, totaling 11 models. 2. In the name Emgrand GS, the letter G stands for Grand, interpreting its larger body size and space. The letter S stands for Sporty, as the Emgrand GS design incorporates the crossover SUV style with the aesthetic concept of sporty mimicry design.
14
3
Share

What Causes White Smoke from a Car's Exhaust Pipe in Winter?

White smoke is actually just water vapor attached to the inner wall of the exhaust pipe muffler. Since the exhaust gas coming out of the pipe is at a high temperature, this hot water vapor rapidly cools when expelled from the exhaust pipe, quickly condensing into visible small water droplets. Here are the sources of water vapor in the exhaust pipe: 1. In most cases, it comes from the air. 2. Impure fuel containing a relatively high amount of water vapor. 3. A dirty air filter causing insufficient air intake. 4. Older carburetor-equipped family cars with carburetor malfunctions. 5. Modern fuel-injected cars without carburetors where the oxygen sensor in the exhaust pipe is contaminated, failing to provide the correct information to the engine control unit. 6. Damaged cylinder head gasket or cylinder liner allowing coolant to enter the cylinder. 7. Vehicles frequently driven short distances where moisture in the exhaust pipe cannot be fully expelled in time, leading to water accumulation.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.