Is the Polo car produced by FAW or SAIC?

1 Answers
DeNora
07/29/25 11:24am
Polo is a model under SAIC Volkswagen. The Volkswagen Polo is a compact car produced by Volkswagen. The dimensions of this car are 4053 mm in length, 1740 mm in width, and 1449 mm in height, with a wheelbase of 2564 mm. In terms of power, this car is equipped with a 1.5-liter naturally aspirated engine. The maximum power of the 1.5-liter naturally aspirated engine is 83 kW, with a maximum torque of 145 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 3900 rpm. This engine features multi-point fuel injection technology and is paired with either a 6-speed automatic transmission or a 5-speed manual transmission. The front suspension of the Volkswagen Polo uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
Was this review help?
16
1
Share
More Forum Discussions

Explanation of Oil Leakage in Dry Dual-Clutch Transmissions

Oil leakage in dry dual-clutch transmissions may occur due to housing aging, improper sealing, or material issues, requiring replacement of oil seals or the entire assembly. Symptoms of the issue: After oil saturation, a series of fault phenomena may appear, including vehicle slippage, shaking, unusual noises while driving, and engine problems. Causes of leakage: Possible causes include normal wear and aging of transmission seals over time, improper sealing after housing disassembly, or material defects. The main culprit of clutch oil leakage is the aging of the input shaft bottom oil seal, which requires replacement. In severe cases, replacing the entire assembly, adjusting clutch disc clearance, and replacing the torsional vibration damper repair kit and front oil seal may be necessary to prevent oil leakage.
14
2
Share

What is the function of a manual-automatic transmission?

Manual-automatic transmission is easy to operate and satisfies the driver's enjoyment of manual shifting. Manual-automatic transmission is easy to operate: Delayed downshifting will not cause engine overload, especially for beginners starting on a slope, as it prevents stalling. Satisfies the driver's enjoyment of manual shifting: Combining the features of automatic and manual transmissions, it offers some degree of manual shifting pleasure compared to pure automatic transmissions. It also allows for appropriate engine braking by downshifting, which is particularly useful when cornering. Drivers can freely switch between shifting modes based on different driving conditions and personal preferences, perfectly blending the driving pleasure of manual transmissions with the convenience and comfort of automatic transmissions.
11
1
Share

How to Unlock a Volkswagen Steering Wheel Lock?

Volkswagen steering wheel lock usually occurs when the steering wheel is accidentally turned after the engine is turned off and the key is removed, which is a simple anti-theft feature. This situation does not happen every time you start the car. Generally, after starting the vehicle with the key, turning the steering wheel will naturally unlock it. Volkswagen is a car manufacturing company headquartered in Wolfsburg, Germany. Taking the Volkswagen CC as an example, it is a sporty sedan under FAW-Volkswagen, with a body length of 4812mm, width of 1855mm, height of 1417mm, and a wheelbase of 2712mm. The Volkswagen CC combines the stability of a sedan with the agility of a sports car, featuring a 4-door frameless design and a sporty interior that continues the style of Volkswagen's business sedan series, including leather sports seats and a leather intelligent sports steering wheel.
16
4
Share

Why is there no sound from the reversing radar?

The reasons why the reversing radar has no sound: 1. The wiring connection is inappropriate or already damaged. If the rear of the car is close to an obvious obstacle and the reversing radar does not respond at all, there is a problem with the reversing radar wiring; 2. The quality of the radar itself is not good enough; 3. There is a blind spot on the far left and far right of the reversing radar. When this blind spot is about to touch an obstacle, the reversing radar cannot detect it. The reversing radar, also known as the reversing anti-collision radar or parking assist device, mainly consists of ultrasonic sensors, a controller, a display, and other components. Its working principle is that during reversing, the reversing radar uses ultrasonic waves. The probe installed on the rear bumper sends ultrasonic waves that reflect off obstacles, calculates the actual distance between the car body and the obstacle, and then alerts the driver, making parking or reversing safer.
8
4
Share

What Are the Causes of Automotive Solenoid Valve Failure?

Automotive solenoid valve failure is primarily caused by deteriorated transmission fluid, damaged wiring, or faulty solenoid coils. Deteriorated Transmission Fluid: When the solenoid valve operates, transmission fluid enters its interior. If the fluid deteriorates, it can dirty the valve body, hindering its opening or movement. In such cases, the solenoid valve must be removed, cleaned, or replaced, followed by a transmission fluid change. Damaged Wiring: Poor electrical connections can prevent the solenoid valve from functioning properly. For wiring issues, it is recommended to take the vehicle to a 4S shop for professional inspection and repair to avoid additional faults. Faulty Solenoid Coils: Excessively high transmission fluid temperatures can damage the solenoid coils, leading to valve malfunction. If the coils are damaged, they should be replaced.
4
2
Share

What causes the engine light to come on in a Nissan Sylphy?

Dongfeng Nissan Sylphy engine indicator light may come on due to: sensor damage, poor contact, or signal interruption, which can trigger the engine fault light. Fuel quality issues: Poor gasoline quality can affect the incomplete combustion of the air-fuel mixture in the cylinders, leading to the light coming on. Air intake system problems, such as a clogged air filter in the car, can also cause the engine fault light to illuminate. Engine spark plug issues: Ignition coil failure, fuel pump failure, or fuel line blockage can all lead to poor combustion of the engine's air-fuel mixture. Poor combustion results in engine carbon buildup or knocking problems, which are ultimately detected by the engine's oxygen sensor and reported to the ECU, naturally triggering the fault light as a warning.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.