Is the photo on the driver's license pasted on?

3 Answers
LaBrielle
07/24/25 5:37am
The photo on the driver's license is not pasted on. Drivers cannot arbitrarily change the photo on their driver's license due to personal preferences, as doing so would constitute the illegal act of altering a motor vehicle driver's license. Below is the relevant information: According to the "Road Traffic Safety Law of the People's Republic of China," forging, altering, or using forged or altered motor vehicle registration certificates, license plates, driving permits, or driver's licenses will result in confiscation by the traffic management department of the public security authorities, detention of the vehicle, up to 15 days of detention, and a fine; if the act constitutes a crime, criminal liability will be pursued in accordance with the law. Additional information: Pasting one's photo onto another person's driver's license is also an illegal act. A motor vehicle driver's license is a legal certificate issued by relevant administrative authorities after passing the required examinations, permitting the holder to drive certain types of motor vehicles. The name, ID number, photo, and other details recorded on the license cannot be arbitrarily altered by others.
Was this review help?
2
1
Share
VanBrielle
08/10/25 11:37pm
The photo on the driver's license isn't pasted on; nowadays, it's directly printed on the card. I remember that about 20 years ago, the older versions of driver's licenses might have had pasted photos, but those were prone to falling off or being tampered with. When applying for a new license now, you either take a photo at the DMV or upload a digital photo, and then the machine processes and prints it directly onto the card, giving an overall more professional and secure feel. This method offers better anti-counterfeiting properties, making it difficult for others to replace the photo easily. I've been driving for over a decade and renewed my license twice, both times with this printed version, and the color has never faded. Moreover, the card material is more durable, so getting it wet or driving in hot weather won't affect the photo. If someone still thinks the photo is pasted on, they might have seen a very old license or a fake one. Modern technology has made these everyday documents more reliable, allowing us to drive without worrying about minor details.
Was this review help?
9
2
Share
Expand All
JoshuaLynn
09/24/25 6:53am
The driver's license photo definitely isn't pasted on—it's fully printed onto the card surface. I just got my license last year, and during the application at the DMV, they took my photo on-site. Within minutes, the card was produced with the image directly printed on it—pretty high-tech. Pasting it would be so troublesome; if it fell off, you'd have to get it reissued. Now, it's all done in one go, saving time and preventing counterfeiting. A friend told me older versions might have had pasted photos, but all new cards are processed this way—easier to inspect, with clearer photos that resist wear. I think this design is very user-friendly; no worries about the photo peeling off when carrying the license while driving—much safer. When you receive your card after passing the driving test, you'll see the whole process firsthand—the photo is printed on, not manually glued. This kind of progress reflects the modernization of vehicle management, making us new drivers feel more at ease using our licenses on the road.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How Many Days Does It Take from Court Auction to Vehicle Pickup?

From the court posting the auction announcement to the final completion, the entire process generally takes about a month. It is important to note that court auctions involve numerous procedures, and the efficiency of different courts varies, so the timeline may differ. More details are as follows: Required documents: Original owner's ID card, new owner's ID card, original vehicle license (both original and duplicate), purchase tax booklet, proof of vehicle and vessel tax payment, vehicle registration certificate, vehicle inspection report for criminal investigation, and insurance policy/card/invoice. All documents must be provided in original. Detailed vehicle registration transfer process: Issue a unified used car sales invoice; conduct vehicle inspection and take photos; select a new license plate. Currently, license plate selection is done from a unified pool at the vehicle management office, so plates are not readily available and require 3 working days to be produced.
12
5
Share

What are the consequences of excessive or insufficient valve clearance in motorcycles?

The consequences of excessive valve clearance in motorcycles are: 1. Valve noise: The sound mainly comes from the collision between the rocker arm and the valve; 2. Reduced power: The valve opening will become smaller, thereby affecting the engine's intake and exhaust volume; 3. Unexpected damage: There is a possibility of push rod detachment. The consequences of insufficient valve clearance in motorcycles are: 1. Difficulty in cold starts; 2. No idle or unstable idle, reduced power; 3. Increased wear on the valve rocker arm and camshaft. The intake and exhaust valve clearance for ordinary motorcycles is generally around 0.05 to 0.12 millimeters, and the valve clearance may vary for different models. When there is obvious up and down clearance in the valve rocker arm, it indicates excessive clearance; if the rocker arm feels very tight with no clearance when moved by hand, it indicates insufficient clearance.
4
0
Share

Where is the cabin air filter located in the MG ZS?

The cabin air filter of the MG ZS is located inside the glove compartment on the passenger side. The removal process is relatively simple: first open the glove box, press the inner panel of the glove box, release the clips on both sides, and then lower the glove box. After lowering it, you will see a black cover plate. Press the clips on both sides, remove the cover plate, and you can see the cabin air filter. The MG ZS is the first internet-connected SUV model under the MG brand. The dimensions of this car are 4314mm in length, 1809mm in width, and 1652mm in height, with a wheelbase of 2585mm. The MG ZS is equipped with a series of configurations such as a 6-way power-adjustable driver's seat, power-folding exterior rearview mirrors, and rear center headrests. The ESP electronic stability program is standard across all models.
19
4
Share

Does Engine Auto Start-Stop Have a Significant Impact on the Engine?

Although the engine auto start-stop feature causes the engine to start and stop frequently, the damage to the engine itself is minimal. With regular maintenance, the wear and tear from repeated starts and stops on the engine are negligible. Below is some relevant information about auto start-stop: 1. Function of the auto start-stop system: During traffic congestion or while waiting at traffic lights, the engine can shut off, saving fuel that would otherwise be consumed during idle. When it's time to drive, the engine starts immediately. 2. More than 80% of engine wear occurs during cold starts, while normal idle operation accounts for about 20% of wear. The auto start-stop system operates under hot start conditions, temporarily shutting off the engine only during brief stops.
16
5
Share

How to Deal with a Clogged Sunroof Drain in a Car?

There are two methods to deal with a clogged sunroof drain in a car: the air inflation method and using a syringe to inject water. Here are more details: 1. Air Inflation Method: Take an air gun and aim it at the drain holes of the two front drainage pipes inside the sunroof. Use high-pressure airflow to blow through the drainage pipes. Remember to use a cloth to block the airflow to prevent dirty water from splashing onto your body or inside the car. Also, be cautious not to use too strong air pressure, as it may cause the rubber joints and drainage pipes to detach, leading to continued leakage. 2. Using a Syringe to Inject Water: Flushing the drainage pipes with a syringe should help clear the blockage. Practical experience shows that this method is very effective and easy to perform. First, use the syringe to extract water from the sunroof drainage channel to prevent water from flowing into the car.
1
1
Share

What Causes the Nissan Teana to Jerk at Low Speeds?

The reasons why the Nissan Teana jerks at low speeds are: 1. Excessive carbon deposits in the engine; 2. Malfunction in the engine's fuel system; 3. Faulty fuel pump or clogged fuel filter; 4. Dirty throttle body; 5. Engine oil not changed for a long time; 6. Fault in the engine's intake system. Taking the Nissan Teana 2021 2.0L XE Fashion Edition as an example: It is a mid-size car launched by Dongfeng Nissan, with a length, width, and height of 4901mm, 1850mm, and 1450mm respectively, and a wheelbase of 2825mm. It is equipped with a 2.0L naturally aspirated engine, with a maximum power of 115kw, paired with a CVT continuously variable transmission.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.