Is the Outlander domestically produced?

1 Answers
DelKayden
07/25/25 1:59pm
Outlander is domestically produced. The Outlander is a compact 5-door, 5-seat SUV with body dimensions of 4705mm in length, 1810mm in width, and 1710mm in height, a wheelbase of 2670mm, a fuel tank capacity of 63 liters, and tire specifications of 225/55R18. The Outlander is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 122 kW at 6000 rpm and a maximum torque of 201 Nm at 4200 rpm. It features front-wheel drive, with MacPherson independent suspension at the front and multi-link independent suspension at the rear.
Was this review help?
4
1
Share
More Forum Discussions

Should You Press the Accelerator When Driving Straight?

You should not press the accelerator when driving straight. Below are detailed techniques for keeping the car straight: 1. Hold the steering wheel steady and straight: First, ensure the steering wheel is properly aligned, avoid making large turns, and keep the wheel steady. 2. Find suitable reference points on the road: Learn to identify appropriate reference points on the road to help maintain straight driving over time. Examples include the centerline of the road and the roadside markings. 3. Looking far ahead makes it easier to drive straight: Beginners often struggle to keep the car straight on wide roads. This is because the expansive space and broad view can weaken the perception of roadside and marking references.
17
5
Share

Where is the time adjustment button for the Lavida car?

The time adjustment button for the Lavida car is located on the left side of the instrument panel. Below is a detailed introduction to the Volkswagen Lavida: 1. Interior: High-end models feature ambient lighting. Depending on the model, the Lavida is equipped with ACC adaptive cruise control, an 8-inch central control screen, automatic dual-zone air conditioning, air filtration, seat heating, electronic parking brake, and auto hold. 2. Powertrain: The Lavida is powered by 1.6L and 1.4T engines, both belonging to the EA211 series. The maximum power outputs are 85kW (116PS) and 110kW (150PS) respectively, with peak torques of 150N·m and 250N·m.
14
5
Share

Why Does the Car Steering Wheel Become Heavier?

The reasons for a car steering wheel becoming heavier are: 1. The power steering fluid is dirty. Generally, if the steering wheel becomes heavier after 2 to 3 years of driving, it's time to change the fluid; 2. Power steering fluid leakage. A decrease in fluid can also cause the steering to become heavier; 3. If the bearings in the steering system are too tight, the tie rod end is adjusted too tightly, or the steering shaft and sleeve are bent causing jamming, these can all make the steering wheel heavier. If no issues are found after checking the power steering system, you can check if the tires are underinflated. Underinflated tires increase the contact area and friction with the ground, which can also lead to a heavier steering wheel.
2
4
Share

Is it necessary to install a radiator guard for motorcycles?

This depends on the model and usage conditions. For general commuting motorcycles, it is not necessary to install a radiator guard because the possibility of the radiator being hit or damaged is extremely low. However, for motorcycles with exposed radiators that operate in harsh conditions and environments, installing a guard may be considered based on the situation. Relevant information about motorcycles is as follows: 1. Introduction: Motorcycles are powered by gasoline engines and are two-wheeled or three-wheeled vehicles steered by handlebars. They are lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serve as sports equipment. 2. Classification: Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
12
5
Share

What are the symptoms of difficult cold starts in cars?

Symptoms of difficult cold starts in cars: 1. Faulty fuel pressure regulator; 2. Coolant temperature too low; 3. Excessive carbon buildup and fuel injector malfunction. Solutions: 1. Check fuel pressure and determine the fault location by inspecting the fuel pressure regulator; 2. Replace antifreeze in a timely manner according to climate changes; 3. The issue may disappear after the engine warms up. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. Only when the carbon deposits become saturated with gasoline does the car start easily.
1
2
Share

What Causes Abnormal Noise When Turning the Car?

Reasons for abnormal noise when turning the car: 1. Friction between plastic parts: The steering wheel is usually made of plastic components. If the temperature drops, the plastic may harden, naturally leading to friction noise; 2. Steering gear failure: If the noise during steering is very loud, it might be caused by excessive gear clearance in the steering gear, requiring replacement of the steering gear; 3. Dirty power steering fluid: If the power steering fluid is too dirty, it increases the pressure in the power system, causing a buzzing noise from the power steering pump. Therefore, the power steering fluid should be replaced promptly; 4. Improper tension or aging of the power belt: For mechanical hydraulic power steering, if the power belt is improperly tensioned or aged, it will produce abnormal noise. Adjust the belt tension or replace the belt.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.