Is the Orlando an SUV?

What Are the Reasons for an Automatic Transmission Car Not Moving When Accelerating Uphill?

Introduction to the reasons why an automatic transmission car does not move when accelerating uphill: 1. When the transmission shift valve position sensor signal is incorrect, it cannot detect which gear it is in. 2. If there is an issue with the shift valve, the gear may not engage properly, and the oil passage may not open. Automatic transmission cars typically use hydraulic transmission devices to replace the mechanical clutch in manual transmission cars, hence there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to propel the car forward. Below are detailed explanations regarding automatic transmission driving licenses: 1. Overview of automatic transmission: Automatic transmission falls under the C2 vehicle category. Small automatic transmission cars. C2 covers small and micro automatic transmission passenger cars, as well as light and micro automatic transmission cargo vehicles. Small passenger cars with fewer than 9 seats, with a maximum design total mass of ≤4500kg. Length ≤6.0m, width ≤2.0m, height ≤2.5m. 2. Requirements for obtaining an automatic transmission license: As long as the driver is at least 18 years old, passes the medical examination, and does not have any diseases that prohibit obtaining a driver's license, they can apply for an automatic transmission driver's license.

10

3

Share

Difference Between Reissuing Inspection Compliance Mark and Applying for Inspection Exemption Mark

Inspection compliance marks and inspection exemption marks are essentially the same. The marks received by exempted vehicles and those issued by inspection stations after passing safety technical inspections only differ in the inspection agency item on the back. Exemption marks print "None," while inspection station-issued marks print the name of the inspection agency; all other aspects are identical. Reissuing an inspection compliance mark is applicable when the original mark is lost or damaged and can be done via the APP12123. Below are relevant details about vehicle inspections: 1. Processing Locations: Embassies/consulates and foreign-licensed vehicles should process at the vehicle management office, while other vehicles should go to the branch office corresponding to the address on the vehicle owner's identity document. The vehicle management office or branch will complete the process within one working day from acceptance, with no fees charged. 2. Address Details: For organizations, the address is as stated on their identity document; for individuals, it is their declared residential address. 3. Circumstances for Reissuing Vehicle Inspection Compliance Marks and Required Documents: If the inspection compliance mark is damaged, lost, or destroyed during its valid period, the vehicle owner must submit the following documents to apply for a reissue: (1) Vehicle registration certificate. (2) If the mark is damaged, the damaged inspection compliance mark must also be surrendered.

13

1

Share

Can You Cool Overheated Brake Discs with Water?

You should not cool overheated brake discs with water. The daily maintenance of brake discs is as follows: 1. Protect brake discs when washing the car: Before washing your car, it is recommended to let the car cool down naturally before proceeding with washing and maintenance. During daily braking, the brake discs generate a large amount of heat due to friction, resulting in high temperatures. If you wash the car at this time, the cold water sprayed on the hot brake discs can cause thermal contraction, leading to warping or deformation of the steel brake discs, and in severe cases, cracks may appear. 2. Minimize brake disc wear: Although brake discs wear out slower than brake pads, and most mechanics only recommend replacing brake pads and brake fluid, brake discs will eventually wear out after a certain mileage. Uneven surfaces or insufficient thickness of the brake discs can significantly impair braking performance over time. 3. Avoid brake noise: Performance-grade brake pads are designed for prolonged high-temperature use, and "hissing" sounds are normal due to different material compositions and usage conditions. However, if such noises occur in regular passenger vehicles, it should be taken seriously. Drivers should regularly clean the brake pads and discs to prevent foreign objects from entering the braking system and replace them with qualified brake pads.

7

3

Share

What is the fuel tank capacity of the Q5L?

The fuel tank capacity of the Audi Q5L is 73 liters, as officially announced. Owners who have purchased the Audi Q5L can also check this information on the vehicle's configuration sheet. The Audi Q5L requires 95-octane fuel, with a fuel consumption of 7.2 to 7.5L per 100 kilometers. A full tank can cover a distance of approximately 973 to 1013 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

17

5

Share

What does a key symbol on the car dashboard indicate?

When a key symbol appears on the car dashboard, it may indicate that the vehicle's anti-theft system has been triggered. Here's the relevant information: 1. With the development of the automotive industry, there are increasingly more vehicles in society. Whether it's a family car worth tens of thousands or a luxury vehicle worth millions, we rarely see news reports about car thefts. When observing vehicles parked on the roadside, we no longer find steering wheel locks that many owners used to install. 2. When the car's anti-theft system is triggered, a key symbol will appear on the dashboard. Modern car keys are no longer simple mechanical keys but integrated circuit, network, and mechanical key systems. When the signal from the key doesn't match the car's password, the vehicle system will recognize it as illegal entry, and the anti-theft system will automatically lock the engine, preventing the vehicle from starting. 3. The anti-theft system may be triggered in these situations: not using the electronic key lock button when boarding and starting the engine or using a mechanical key to open the trunk lid; opening the engine hood and reconnecting the battery terminals after disconnection; breaking into the car door to forcibly enter the vehicle; changing the vehicle's pitch angle and switching the power to IG-ON through a heating wire without operating the power switch. These situations will trigger the anti-theft system, causing the engine to be locked and unable to start.

11

2

Share

What is the difference between a manual and automatic driver's license?

The biggest difference between an automatic transmission license and a manual transmission license is that with a manual transmission license, you can drive both manual and automatic transmission vehicles, whereas an automatic transmission license only permits driving automatic transmission vehicles and not manual transmission ones. The differences between a manual transmission driver's license and an automatic transmission driver's license are as follows: 1. The permitted vehicle types are different. The permitted vehicle type for a manual transmission license is: "Small cars," while for an automatic transmission license, it is: "Small automatic transmission cars." 2. The codes representing the permitted vehicle types are different. The code for a manual transmission license's permitted vehicle type is: "C1," while for an automatic transmission license, it is: "C2." 3. The permitted vehicles are different. The permitted vehicles for a manual transmission license include: "Small and micro passenger vehicles, as well as light and micro cargo vehicles; light and micro special operation vehicles." The permitted vehicle type for an automatic transmission license is: "Small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles." 4. The other permitted vehicle types differ. Other vehicle types that can be driven with a manual transmission license include: "Small automatic transmission cars (code C2), low-speed cargo vehicles (code C3), and three-wheeled vehicles (code C4)."

18

2

Share

Is the Orlando an SUV?

What Are the Reasons for an Automatic Transmission Car Not Moving When Accelerating Uphill?

Difference Between Reissuing Inspection Compliance Mark and Applying for Inspection Exemption Mark

Can You Cool Overheated Brake Discs with Water?

What is the fuel tank capacity of the Q5L?

What does a key symbol on the car dashboard indicate?

What is the difference between a manual and automatic driver's license?

What are the effects of heavy throttle on a car?

What Causes Steering Wheel Vibration When Speed Exceeds 100km/h?

What are the steps for replacing an oil filter?

What are the solutions when the brake lights don't work?