Is the original vehicle license required for handling traffic violations?

2 Answers
VanAmir
08/26/25 3:22am
Handling traffic violations does not necessarily require the original vehicle license; a photocopy is also acceptable. Here are the relevant details: Methods to check violations: Visit the traffic police detachment for inquiries; check on various traffic police portal websites; inquire via mobile text messages. Here are the relevant details: Violation codes: Violation codes, also known as traffic violation codes or traffic offense codes, are encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. These codes vary across different provinces in China and typically consist of four digits. They are categorized based on the principles outlined in traffic laws, with the sequence from left to right representing a behavior classification code, a point deduction classification code, and the last two digits as sequential numbers.
Was this review help?
6
1
Share
Leo
09/08/25 3:52am
I just went to deal with a speeding violation a couple of days ago and specifically checked the regulations. Currently, all processing windows require the original vehicle license, and photocopies are simply not accepted. The main reason is that staff need to verify the vehicle information and status, such as the engine number, which must be checked against the physical document. Moreover, for violations involving point deductions, the information needs to be scanned into the system for record-keeping. I remember the guy in front of me last time didn’t bring the original; even though it would have taken just ten minutes to drive back and get it, he ended up wasting forty minutes in line for nothing. If you’re handling an out-of-town violation through an agent, remember to mail the documents in advance, as some agencies don’t accept digital copies now. Also, before processing, it’s best to confirm that your annual inspection and insurance are up to date, or you’ll have to make extra trips.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What are the reasons for the lack of power in the acceleration of the Delong X3000?

The following are the related reasons for the lack of power in the acceleration of the Delong X3000: 1. Excessive engine water temperature: There are many reasons that can cause the engine water temperature to be too high or even "boil over," such as damage to electronic components in the cooling system (thermostat, cooling fan), poor radiator performance, insufficient coolant, etc. 2. Pull over but do not turn off the engine: Pull over, but do not turn off the engine immediately! Because the coolant temperature is already very high, and its cooling capacity has reached its limit. If the engine is turned off immediately, the boiling coolant will stop circulating (for most engines, the water pump is driven by the crankshaft). 3. Electric water pump: Of course, if the engine has an electric water pump, it will be better. If the excessively high temperature is not cooled, the engine will still struggle. If you let the engine idle for a while, the continuously circulating coolant can still reduce the impact of high temperature on the engine. 4. Check the antifreeze: Check if there is a lack of antifreeze, which can cause the engine water temperature to rise. Also, check the circulation of the coolant to see if it is not flowing properly. Additionally, you can check the water temperature sensor, water pump, thermostat, cooling fan, etc., as these can all cause the water temperature to rise. If you are not very skilled, it is better to go to a repair shop for inspection.
6
2
Share

Why Does the Car Make Strange Noises During Emergency Braking?

The reason for strange noises during emergency braking is: the sound produced when the ABS (Anti-lock Braking System) is activated. Precautions for car braking include: 1. Press the brake pedal gently, maintaining braking force, and adjust the pressure based on the speed of the vehicle ahead; 2. If the braking distance is sufficient, press the brake pedal slowly and continuously to achieve uniform deceleration; 3. As the car comes to a stop, gradually release the brake pedal until it is fully lifted when the vehicle is completely stationary. The impacts of emergency braking on a car are: 1. Increased fuel consumption; 2. Reduced tire lifespan and increased wear; 3. Shortened engine lifespan; 4. Reduced lifespan of the clutch system; 5. Decreased lifespan of brake pads and brake discs; 6. Accelerated aging of the brake caliper and master cylinder.
13
2
Share

What Causes a Car to Suddenly Stall After Starting?

There are several reasons why a car may suddenly stall after starting: 1. Short circuit in the low-voltage circuit; 2. Damage to the fuel pump or a cracked fuel line; 3. Clogged carburetor fuel inlet or an empty fuel tank; 4. Faulty sensors; 5. Disrupted engine timing system; 6. Issues with the engine overheating and anti-explosion system; 7. Malfunctioning ignition coil or electrical components. Solutions to address sudden stalling include: 1. Check the engine oil lubrication; 2. Inspect if the carburetor vent pipe is blocked; 3. Examine whether the trigger coil has a short circuit under high temperatures; 4. Check for any damage, looseness, or compression in the fuel line's negative pressure tube and fuel pipe.
13
3
Share

What is the fuel tank capacity of the old RAV4 in liters?

The fuel tank capacity of the old RAV4 is 60 liters. The fuel tank capacity refers to the size of the fuel tank, which measures a vehicle's ability to carry fuel. The fuel tank capacity determines the driving range. Taking the 2020 RAV4 as an example, its body dimensions are: length 4600mm, width 1855mm, height 1680mm, wheelbase 2690mm, and fuel tank capacity 55L. The 2020 RAV4 is equipped with a 2.0L naturally aspirated engine, with a maximum power of 126kW, maximum power speed of 6600rpm, maximum torque of 209Nm, and is paired with a CVT continuously variable transmission.
5
0
Share

What are the consequences of not changing the power steering fluid?

The consequences of not changing the power steering fluid are: it can lead to damage to the steering gear and power steering pump. Power steering fluid is a medium oil added to the power steering system, which plays a role in transmitting steering force and cushioning. Long-term use of power steering fluid can cause it to become dirty or deteriorate, and it needs to be replaced approximately every 2 years or 30,000 kilometers. The method for changing the power steering fluid is: 1. Lift the vehicle and engage the handbrake; 2. Disconnect the return pipe; 3. Start the vehicle and turn the steering wheel left and right to drain the old power steering fluid, then add new fluid until the color of the power steering fluid is relatively clean; 4. Follow the reverse steps to reinstall the pipe and add new power steering fluid until the fluid level reaches the maximum mark.
17
3
Share

How to adjust the time in Wuling Hongguang S?

Wuling Hongguang S adjust the time in the car method is: 1. Turn on the key, the indicator light on the dashboard will light up; 2. See the time display on the radio; 3. See the buttons with h and m are the buttons to adjust the hour and minute; 4. Press and hold the button with h, wait until the hour on the radio starts flashing, then rotate the middle power button left or right to adjust the hour; 5. Press and hold the button with m, when the minute starts flashing, rotate the middle power button left or right to adjust. Wuling Hongguang S body size is: length 4390mm, width 1660mm, height 1750mm, wheelbase is 2720mm, fuel tank capacity is 50l.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.