Is the original invoice required for used car transactions?

1 Answers
VanMalachi
07/30/25 8:10am
Buying and selling used cars requires the original invoice. Here is some additional information: 1. The original car invoice refers to the invoice issued when purchasing a new car. When buying a used car that was previously owned by one individual, the invoice required for the transfer of ownership is the original car invoice; 2. When inspecting the original invoice, pay attention to whether the name of the vehicle owner on the original invoice matches that on the vehicle registration certificate. If they do not match, the car may be of unknown origin or the invoice may be problematic; 3. Also, check whether the invoice is stamped with the verification seal of the Beijing Administration for Industry and Commerce. If the invoice is found to be unstamped, you need to obtain a certificate from the original new car sales unit before the transfer of ownership, and then have the verification seal stamped by the Administration for Industry and Commerce.
Was this review help?
3
2
Share
More Forum Discussions

How to Deactivate the Anti-lock Braking System?

Methods to deactivate the car's anti-lock braking system are as follows: 1. First, if the ABS wheel speed sensor malfunctions, it will cause the ABS light to illuminate. Generally, the wheel speed sensor is installed on the wheel, and after prolonged driving, dust and mud can accumulate, affecting signal transmission. In this case, simply cleaning off the accumulated dust will suffice. 2. Second, if there is a connection fault in the ABS wiring, which usually occurs at the plug connection of the wheel speed sensor, you can check each connection one by one to ensure they are secure. 3. If the issue is due to programming problems in the ABS control unit, a specialized diagnostic computer will be required to identify and resolve the problem. 4. In the case of a circuit board fault in the ABS control unit, the corresponding computer module needs to be replaced, although the probability of this fault occurring is very low. 5. Finally, the problem might be with the ABS master cylinder. Although there is a risk of wheel lock-up, it does not affect the normal braking system or vehicle operation. You only need to visit a 4S shop promptly for inspection, diagnosis, and repair.
14
4
Share

What does vehicle ADS mean?

Vehicle ADS stands for Adjustable Damping System. Below is the relevant introduction about ADS: 1. ADS, which stands for Adaptive-damping-System, is an adjustable damping system, also known as adjustable shock absorbers. This system allows the driver to adjust the stiffness of the shock absorbers according to personal preferences, road conditions, and usage requirements to suit different needs. 2. ADS works by varying the damping force of the shock absorbers. In the stiffer mode, it provides greater damping force to enhance shock absorption during aggressive driving. In the softer mode, it offers lower damping force, delivering a smoother and more comfortable ride.
9
3
Share

Can the Hongqi HS7 go off-road?

The Hongqi HS7 is capable of off-road driving. Here is more information about the Hongqi HS7: 1. The Hongqi HS7 adopts a front-engine four-wheel-drive configuration, with a full-time four-wheel-drive system and a multi-plate clutch central differential. The full-time four-wheel-drive system can better distribute the vehicle's power, significantly enhancing its off-road capability. 2. The Hongqi HS7 features double-wishbone independent suspension at the front and multi-link independent suspension at the rear, with a unibody structure. The vehicle is equipped with independent suspension systems at both the front and rear. 3. The Hongqi HS7 is powered by a 3.0T engine, paired with an 8-speed automatic transmission. It delivers a maximum power output of 248 kW and a maximum torque of 445 N·m. The 0-100 km/h acceleration time is 7.8 seconds, and the combined fuel consumption is 10.9L per 100 km.
10
4
Share

What are the body dimensions of the BMW X7?

The length, width, and height dimensions of the BMW X7 are 5163mm/2000mm/1835mm, which are official data. The length of the BMW X7 refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The turbocharged engine of the BMW X7 has a maximum power of 250kW and a maximum torque of 450 Nm. The maximum power speed of this engine is 5500 to 6500 rpm, and the maximum torque speed is 1500 to 5200 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic manual transmission. The country has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
10
2
Share

How to Replace the Battery in the Honda Avancier Key Fob?

Here is the method to replace the battery in the Honda Avancier key fob: 1. First, pull out the mechanical key and set it aside. Press the release button to remove the mechanical key. 2. Next, locate the position of the battery holder's clip. Be careful when releasing the clip, especially in winter when plastic components become brittle. 3. Then, gently pry open the gap between the key fob halves and fully separate them. 4. Replace with a new battery, ensuring the positive side (marked with "+") faces downward during installation. 5. After replacing the battery, align both halves of the key fob and press firmly to snap them together. Finally, reinsert the mechanical key to complete the battery replacement.
5
3
Share

Can the front of the car sweep the line during a right-angle turn?

Generally, during the right-angle turn in Subject 2 of the driving test, the front of the car can sweep the line. Although in reality, opinions vary by region—some say it's allowed while others say it's not. However, according to the 'Content and Methods of Motor Vehicle Driver Tests,' the evaluation criteria for straight-line turns specify that the wheels must not touch or press against the road edge line, but it does not state that the front of the car cannot sweep the line. Below are the evaluation criteria for right-angle turns: 1. Drive the vehicle along the prescribed route, making a right-angle turn from left to right or right to left, and pass through in one go; 2. Do not stop midway; 3. The wheels must not touch or press against the lane edge line.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.