···
Log in / Register

Is the original ID card required when buying a car?

6Answers
JaydenDella
07/24/2025, 11:19:06 PM

Buying a car requires the original ID card. Here are the relevant introductions about buying a car: 1. Precautions: The car purchase invoice is the most important proof when buying a car, and it is also one of the certificates for car registration. Therefore, when buying a car, be sure to ask the dealer for the car purchase invoice and confirm its validity. 2. Vehicle inspection: For vehicles that are exempt from inspection for six years, the vehicle does not need to be driven over. Just bring the vehicle license, the ID card of the name on the vehicle license, and a copy of the compulsory insurance policy that has not expired. Check the traffic management website to see if there are any violation records. Then go to the nearest annual inspection station to handle the procedure.

Was this review help?
104
Share
Hadley
08/11/2025, 07:59:30 AM

A few years ago, I bought a new car, and the entire process required my original ID card. After selecting a car at the 4S dealership, the salesperson immediately asked for my ID to handle the temporary license plate and vehicle registration. I foolishly brought a photocopy at the time, only to make a wasted trip—the DMV required the original for verification before issuing the official license plate. Later, even the loan process couldn’t proceed without it, as the bank needed to verify my identity for financial security. The same goes for purchasing insurance, where the original ID is required to sign the contract. In short, buying a car isn’t just about picking the right look—your original ID card is essential. Without it, you can’t even complete the follow-up paperwork. My advice? Double-check that you have it in your bag before heading to pick up the car, so you don’t waste time like I did—I had to take an extra half-day off just to sort it out.

Was this review help?
2
Share
Expand All
LeAlex
09/26/2025, 11:14:15 PM

As someone who frequently helps friends with car-related matters, I know that the original ID card is indispensable when buying a car. The dealership will require you to present the original for photocopying and archiving, which is used to register the owner's information at the vehicle management office and ensure a smooth process for obtaining the vehicle license. If the original is missing, the vehicle transfer process can be stalled, especially when buying a used car, where the risk of impersonation must be carefully avoided. The loan process also relies on the original for credit checks. I always remind everyone to prepare the original in advance and bring a copy as a backup, just in case they forget and need a remedy. In fact, buying a car isn't just about paying—it involves a lot of paperwork tied to the ID card, so having it ready early saves a lot of hassle.

Was this review help?
8
Share
Expand All
LaTanner
11/10/2025, 12:13:52 AM

Last time when I took my wife to order a car, we almost had a misunderstanding—she thought a photocopy of the ID card would suffice, but I insisted on bringing the original. It turned out to be the right call: the 4S dealership required the original document for on-site verification when processing the contract, as the salesperson explained it's a fundamental anti-fraud procedure. When registering the new license plate at the DMV, the staff directly scanned the original with a device to input information—photocopies were invalid. Even the loan approval process demanded the original to be faxed or photographed for identity confirmation. Thankfully we brought it, or the whole day would've been wasted. I find this regulation quite reasonable as it safeguards both buyers and sellers. My advice to anyone purchasing a car: never cut corners for convenience—original documents are essential.

Was this review help?
6
Share
Expand All
StJuliana
12/31/2025, 02:01:07 AM

I remember when my friend went to buy a car, he forgot to bring the original ID card, which caused a lot of hassle. The car seller insisted on the original copy to sign the purchase agreement and proceed with the vehicle registration procedures. The vehicle management office clearly stated that the original ID is required to apply for a temporary license plate and the certificate of ownership, otherwise the system would reject the processing. The loan process was even stricter, with the bank personally verifying the original ID to prevent fraud. Eventually, he had to rush back home to get it, delaying the delivery time. Since then, I always remind everyone to bring the original ID card when purchasing a car, as it's essential for insurance or transfer procedures. If absolutely necessary, contact the dealer to discuss alternative solutions, but exceptions are rare. The core issue is identity verification to ensure the transaction is legitimate.

Was this review help?
20
Share
Expand All
MackenzieLynn
03/28/2026, 03:42:17 AM

Personal experience: Buying a car requires the original ID card, which plays a key role in the entire process. When signing the contract, the salesperson will scan the original for record-keeping; the DMV needs it to verify the owner's eligibility for vehicle registration; banks use it for background checks when applying for loans; and it's also required to ensure accurate information when purchasing insurance. I recommend checking the documents a day in advance and bringing copies to assist with the process. If you occasionally forget, you can try rescheduling for another day, but it will delay progress. Additionally, for couples buying a car together, it's best for both parties to bring their IDs to simplify the procedures. In short, the original ID card is the foundation of the buying and selling process, and neglecting it can cause a series of troubles.

Was this review help?
16
Share
Expand All
More Q&A

How many meters does the straight-line driving in Subject 3 end?

There is no fixed distance for straight-line driving in Subject 3, but it is approximately around 100 meters. The main challenge of this test item is to keep the vehicle moving in a straight line. Some people think that driving at a slower speed can ensure straight-line driving. However, it is important to note that there is also a speed requirement for straight-line driving, and the vehicle must reach the specified speed to pass. Below is relevant information: Straight-line driving test rules: If the direction control is unstable and the vehicle cannot maintain straight-line driving, the test is directly failed; if the specified speed is not maintained, 10 points are deducted; if the vehicle deviates more than 30 cm during driving, the test is directly failed. Subject 3 test content: preparation before starting, light simulation test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, driving straight through intersections, left turns at intersections, right turns at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and night driving.
105
Share

Is the Temporary License Plate Number the Same as the Official License Plate Number?

Temporary license plates and official license plate numbers are different. Temporary license plates are randomly assigned numbers for temporary use, with a validity period of three months. Official license plates require selecting a number at the local vehicle management office for registration. Below are the conditions for applying for a temporary license plate: 1. When driving a vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office in the place of purchase. 2. When transferring vehicle registration and after paying for the official license plate, a temporary license plate must be applied for at the local vehicle management office to drive back to the original location. 3. For a new vehicle in the local area that has not yet obtained an official license plate and needs to be driven to another location for modifications, a temporary license plate must be applied for locally. After modifications are completed, a temporary license plate must be applied for at the local office to drive back to the original area. 4. When purchasing a vehicle locally and needing to drive it to another location, a temporary license plate must be applied for locally to drive to the other location; the same applies vice versa. 5. Vehicles that have not yet been permanently registered and require temporary trial use.
104
Share

What are the conditions for an engine to start?

Engine starting requires three basic conditions: fuel, spark, and cylinder pressure. The engine converts other forms of energy into mechanical energy. The function of an automobile engine: It serves as the power-generating device for a car, acting as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental performance. Depending on the power source, automobile engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems. Common gasoline and diesel engines are both reciprocating piston internal combustion engines that convert the chemical energy of fuel into the mechanical energy of piston movement to generate power. Engine maintenance methods: Use high-quality engine oil, use qualified coolant, regularly clean radiator scale, periodically remove carbon deposits from the car, replace the three filters on time, and maintain reasonable engine speed.
117
Share

What is the method for changing brake fluid?

Open the car hood, locate the brake fluid reservoir, and remove the reservoir cap to inspect the quality of the brake fluid. Use a syringe to extract all the old brake fluid from the reservoir, then refill it with new brake fluid. During the extraction process, avoid splashing the fluid on yourself to prevent corrosion from the brake fluid. Other methods for changing brake fluid are as follows: 1. Locate the two brake lines on the master cylinder in the engine compartment. Use a line wrench to loosen them until brake fluid begins to flow out. Once the reservoir is empty, tighten the lines. 2. Refill the brake fluid reservoir, lift the vehicle, and have one person sit inside to pump the brake pedal several times and then hold it down. Another person underneath the vehicle should use a wrench to loosen the bleeder screw on the brake caliper, allowing brake fluid to drain. Follow the farthest-to-closest principle: bleed the left rear, right rear, right front, and left front calipers in sequence. 3. Lower the vehicle, refill the reservoir, lift it again, and repeat the bleeding process for all four calipers in the same order. Once completed, tighten all bleeder screws and check for leaks to ensure a complete brake fluid replacement.
104
Share

What Causes a Modified One-Button Start to Fail to Ignite?

The reasons why a modified one-button start fails to ignite are as follows: Steering Wheel Lock: The steering wheel lock is a simple anti-theft feature. When the car is turned off, if the steering wheel is rotated a certain angle from its centered position in one direction, it will make a "click" sound and lock. In this state, the one-button start function will not work. The solution is to turn the steering wheel left and right while pressing the engine start button to release the tension and unlock the steering wheel. Gear Not in Park: This is another important safety logic set by manufacturers for vehicle owners. Consider this: if the car could start directly while in reverse or drive gear, the vehicle would lurch forward or backward during ignition. Therefore, manufacturers have implemented this setting for safety reasons.
106
Share

What are the symptoms of chassis abnormal noise?

The symptoms of chassis abnormal noise are as follows: Universal joint failure of the drive shaft: It may be caused by a broken dust cover or oil leakage that was not repaired in time. The solution is to replace the new universal joint of the drive shaft. Interference between components: It may be caused by collision or the installation of other equipment, which causes mutual influence between two components. The solution is to repair or replace the relevant components to eliminate interference. Loose bolts or nuts: It may be caused by long-term driving on roads with poor conditions, natural loosening of bolts, improper disassembly and installation that damages the bolts, insufficient tightening torque, or incorrect bolt specifications. The solution is to tighten or replace the bolts and nuts.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.