Is the National VI code National VL?

Do I need to change my photo for a 6-year license renewal?

For a 6-year license renewal, you need to change your photo. A recent one-inch color photo with a white background and no hat must be used for the driver's license renewal. Here are the specific details about the renewal process: 1. Processing Location: The driver's license renewal can be processed at the vehicle management office where the original driver's license was issued or at any other vehicle management office outside the original issuing location. 2. Required Materials: When applying for a driver's license renewal, you need to fill out an application form and submit the following documents: the identity proof of the motor vehicle driver, the original driver's license, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regiment level or above. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority is required.

7

3

Share

What Type of Engine Oil is Suitable for the Hyundai Elantra?

The original engine oil for the Hyundai Elantra is produced by Mobis, a subsidiary of Hyundai, and is an SL-grade API-SM/GF-4 SAE-5W-20 semi-synthetic oil. For later maintenance and oil changes, you can choose fully synthetic oils with a grade of 5W-30 or higher, such as Castrol Edge 0W-40, Castrol GTX, Castrol Magnatec, Mobil Super 2000, Shell, and other brands. The maintenance manual requires engine oil with a grade of 5W-30 that meets the A5B5 certification. Any oil that meets the above specifications can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Hyundai Elantra is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling about three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the engine oil level is within the standard range.

5

3

Share

What are the blind spots when driving a car?

The blind spots when driving a car include the front, front and rear blind spots, blind spots under the sides of the car, A-pillar blind spots, rearview mirror blind spots, and B-pillar blind spots. Below is a detailed introduction to the blind spots when driving a car: 1. Front, front and rear blind spots and blind spots under the sides of the car: These are all semi-blind spots, and obstacles can only be unseen when they are relatively low in height. The front and rear blind spots vary depending on the car's specifications and model. The blind spots under the car, near the side skirts and rear wheels, are the lower blind spots not visible in the rearview mirrors. The size of these blind spots is influenced by the car's height, the size of the rearview mirrors, and the angle of the rearview mirrors. 2. A-pillar blind spots: These are located on the forward sides of the vehicle, where the view is blocked by the 'pillar' between the front windshield and the front side windows. The size of the blind spot is entirely affected by the A-pillar. 3. Rearview mirror blind spots and B-pillar blind spots: The observation range of the side rearview mirrors is also limited, and the area diagonally behind the vehicle is generally a blind spot for the external rearview mirrors. The B-pillar blind spots and the front passenger seat can also block part of the view. Even when observing diagonally behind while changing lanes, the B-pillar blind spots may still hide pedestrians or vehicles.

11

1

Share

What does the DS gear in an automatic car mean?

It refers to the sport mode, also known as the hill-climbing gear. Its characteristic is higher shift RPM, mainly used for mountain road climbing and rapid overtaking. Automatic transmission gears are generally represented by the letters P, R, N, D, S, and L, which stand for Park (parking gear), Reverse, Neutral, Drive (forward gear), Sport mode, and Low-speed mode respectively. Here is additional information: 1. DS gear: The so-called D gear is the Drive gear, which is the abbreviation of Drive. When the gear lever is moved to this position, the transmission automatically shifts gears within the engine's RPM range, with the shift point depending on engine load, the driver's driving style, and vehicle speed. The S gear is the sport mode of the D gear, providing more powerful power output. In this mode, the transmission can shift freely, but shifting is delayed to keep the engine at high RPM for a longer time, thereby increasing the vehicle's power. 2. PRNL gear: P gear is used when the car is parked and not in use. In this position, the wheels are mechanically locked to prevent rolling. R gear should be engaged only after the car has come to a complete stop to avoid damaging the transmission. N gear is used for temporary stops (such as at a red light). Note that this gear represents neutral, and to prevent the car from rolling on a slope, the brake must be applied. L gear is the low-speed gear, providing greater torque for climbing hills.

6

3

Share

What Causes the ABS Light to Illuminate in Hyundai Vehicles?

ABS light illumination can occur in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the vehicle's speed signal. This prevents the ABS computer from determining the speed and wheel slip rate, thus failing to issue appropriate commands for brake adjustment. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Inspect wire connections and reattach any loose ones. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As engine speed increases, voltage rises, and the ABS light turns off. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connector. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speed signals during high-speed driving. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically listed on the sticker near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward, then release the pedal to complete self-positioning. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, locked wheels can cause the vehicle to skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

14

4

Share

What Causes the Engine Warning Light to Illuminate in a Golf?

There are primarily 7 reasons for the engine warning light to illuminate: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen levels, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and oil specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Causes include faulty spark plugs, ignition coils, fuel pump issues, or clogged fuel lines. Turbocharging problems: Issues with the intake boost piping or turbocharger can trigger the warning light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Air intake issues: Obstructions in the engine's air intake system may cause the warning light to activate, especially if the air filter is dirty and not regularly cleaned. Exhaust system faults: Problems like faulty rear oxygen sensors, catalytic converter issues, or exhaust camshaft and bearing failures can illuminate the warning light. The catalytic converter is particularly vulnerable to damage from leaded gasoline, certain lubricant additives, physical impacts, or fuel system malfunctions. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or doesn't properly communicate with the engine control unit, it may prevent normal engine operation and trigger the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine is operating normally. If there's noticeable shaking, black smoke, or other abnormalities - especially if the light is red - do not restart the engine. If the engine can be started, turn it off and wait 5-10 minutes. Then, without pressing the brake (or clutch for manual transmissions), activate the ignition to the ON position to initiate the self-check function. After 5-10 seconds, observe if the warning light turns off. If the light remains on, promptly visit a service center. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.

1

3

Share

Is the National VI code National VL?

Do I need to change my photo for a 6-year license renewal?

What Type of Engine Oil is Suitable for the Hyundai Elantra?

What are the blind spots when driving a car?

What does the DS gear in an automatic car mean?

What Causes the ABS Light to Illuminate in Hyundai Vehicles?

What Causes the Engine Warning Light to Illuminate in a Golf?

What does the TC indicator on the dashboard mean?

What are the causes of BYD's one-key start failure?

What are the new regulations for the annual review of a Class A driver's license with demerit points?

What Causes the Airbag Indicator Light to Illuminate?