Is the Motorcycle Exempt from Inspection for 6 Years or 4 Years?

1 Answers
DiSophia
07/30/25 1:19am
Motorcycles are exempt from inspection for the first 6 years. However, exemption from inspection does not mean exemption from annual review. It only means that the vehicle does not need to undergo on-site inspection, i.e., the vehicle does not need to go to a testing institution or the vehicle management office for safety and technical inspection. Nevertheless, the owner must still bring relevant documents to the vehicle management office every two years to collect the inspection compliance label. After three exemptions, the vehicle must undergo on-site inspection every year. The 6-year exemption policy only applies to new vehicles. From the date of registration, the inspection cycle remains unchanged. According to the original cycle regulations, inspections are required every two years for the first 4 years, and then once a year. For new vehicles, the inspection compliance label must be applied for in the 2nd, 4th, and 5th years after registration, without the need for on-site inspection at a testing institution. Motorcycles registered for more than 6 years (including 6 years) must undergo on-site inspection at a testing institution every year. For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years and every 6 months thereafter. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years and every 6 months thereafter. For small and micro non-commercial passenger vehicles, inspections are required every two years within the first 6 years, once a year thereafter, and every 6 months after 15 years. For motorcycles, inspections are required every two years within the first 4 years and once a year thereafter.
Was this review help?
4
1
Share
More Forum Discussions

What is the black thing on the front undercarriage of the car?

It is the lifting hole used in the welding production line during manufacturing. Below are the functions of undercarriage armor: 1. Anti-corrosion: Rust on cars usually starts from the bottom plate. Even cars that have only been driven for three to five years may show rust spots on the side beams. Southern regions have inherently humid weather, and the residual wastewater from each car wash accumulates at the bottom, potentially forming corrosive factors over time, causing damage to your beloved car. 2. Stone impact protection: While driving, small stones can be kicked up, and the force of these stones hitting the bottom plate is directly proportional to your speed. For example, a 10-gram stone at a speed of 80 km/h can have an impact force 30,000 times its own weight. 3. Vibration damping: The engine and wheels are fixed to the car's floor. Vibrations at certain frequencies can resonate with the bottom plate, causing discomfort. Bottom protection can eliminate this resonance, providing you with peace of mind.
17
2
Share

What is the weight of the 2021 Honda CR-V?

2021 Honda CR-V has a curb weight ranging from 1506 to 1634 kg. Here are the relevant details: Dimensions: The 2021 Honda CR-V 240TURBO CVT 2WD Urban Edition has a body length of 4621 (mm), width of 1855 (mm), height of 1679 (mm), and a wheelbase of 2661 (mm). As a compact SUV, these dimensions are quite standard. The Honda CR-V is an outstanding SUV model under the Honda brand, renowned for its excellent craftsmanship, high-quality interior materials, and powerful performance, which have received widespread acclaim from consumers. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. It features a very stylish exterior design and embodies the concept of providing a relaxed and enjoyable driving experience anytime, anywhere.
10
5
Share

What does the motorcycle periodic inspection service mean?

The previous annual inspection regulations for motorcycles stipulated an inspection every two years for the first four years, and then an annual inspection after four years. Starting from June 2019, new motorcycles are exempt from inspection for the first six years, followed by an annual inspection after six years. Before applying, the motorcycle owner must resolve all traffic violations and accidents related to the vehicle, obtain compulsory traffic insurance from an insurance company with their ID card and vehicle license, and finally take the motorcycle to an inspection station. The following steps are involved: 1. After preparing the necessary documents, drive the motorcycle to the designated inspection site on a working day for registration and inspection. 2. Fill out two forms: 'Motor Vehicle Inspection Record' and 'Motor Vehicle Verification Application Form,' then submit them to the inspection station staff and wait patiently in line. 3. The motorcycle inspection mainly covers three areas: braking system, lighting system, and exhaust emissions. 4. After the inspection, take the forms to update the vehicle license and pay the relevant annual inspection fees.
13
5
Share

Is it better to use 92 or 95 octane gasoline for MG6?

It is better to use 95 octane gasoline for MG6. The MG6 model is equipped with a 1.5T turbocharged engine. While the model normally uses 92 octane gasoline, using 95 octane can prevent knocking in the engine. Gasoline of the same grade has different octane values, and the higher the grade, the higher the octane value. Gasoline with higher octane values has better anti-knock performance, so it is recommended to use 95 octane. Taking the 2020 MG6 as an example, it belongs to the compact car category with body dimensions of 4704mm in length, 1848mm in width, and 1466mm in height, a wheelbase of 2715mm, a fuel tank capacity of 50 liters, and a curb weight of 1300kg. The 2020 MG6 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a 1.5L turbocharged engine with a maximum horsepower of 181ps, a maximum power output of 133kW, and a maximum torque of 285Nm, paired with a 6-speed manual transmission.
9
0
Share

What is the operation method for turning with an automatic transmission?

Automatic transmission turning operation method is: 1. Slow down in advance and check the rearview mirror; 2. Hold the steering wheel with both hands to control the direction, drive closer to the inner side when entering the curve, and drive closer to the outer side when exiting the curve. Precautions for automatic transmission turning: 1. When turning, observe first, slow down second, and pass third; 2. Pay attention to increasing the safe distance from the vehicle in front; 3. Overtaking is not allowed when turning, as it poses safety hazards; 4. The longer the vehicle body, the greater the turning amplitude, the more dangerous it is; 5. If the road condition is unclear, honk in advance to signal when turning; 6. Pay attention to road signs when turning and turn on the turn signal in advance; 7. When turning, pay attention to yielding to pedestrians and passing vehicles.
5
4
Share

How to Open the Hood of a Volkswagen Bora?

The method to open the hood of a Volkswagen Bora is as follows: 1. After entering the driver's seat, locate the hood release switch next to the driver's seat; 2. Lift the hood release switch, and the hood latch of the Bora will pop open; 3. A gap will appear on the Bora's hood, wide enough to insert your hand; 4. Lift the hood and secure it with the hood support rod. The dimensions of the Volkswagen Bora are: length 4663mm, width 1815mm, height 1462mm, with a wheelbase of 2688mm, a fuel tank capacity of 50 liters, and a trunk capacity of 506 liters. The front suspension of the Volkswagen Bora is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 113ps, a maximum power of 83kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.