Is the Motorcycle Annual Inspection Open on Saturdays?

2 Answers
BriannaRose
07/25/25 12:11pm
The place for motorcycle annual inspection is the Vehicle Management Office, which is closed on weekends. Documents required for annual inspection: Original vehicle license, original and copy of the vehicle owner's ID card, unit certificate for company vehicles, and a copy of the compulsory traffic insurance policy. Inspection items: Check the appearance to ensure safety devices are complete and match the registration photo on the vehicle license; pay fees, input annual inspection information, and conduct on-site testing. Vehicles that fail must undergo self-inspection before resubmitting to the inspection station. Conditions for annual inspection: All traffic violations must be resolved before the vehicle is eligible for inspection. Even one day overdue is not allowed. Vehicles can be inspected up to 60 days in advance, so plan your time wisely and avoid delays.
Was this review help?
11
4
Share
DelReese
08/11/25 8:15pm
As a long-time motorcycle enthusiast who has been visiting inspection stations for over a decade, I've found that Saturday operations vary by location. In major cities like Guangzhou and Shanghai, some inspection points may remain open until noon, while most small towns are closed. I recommend downloading the local DMV app to check specific station hours. Annual inspections are crucial as they check brake and lighting issues, ensuring riding safety. I once witnessed a friend whose insurance claim was outright denied after an accident due to skipped inspection. Remember to bring your vehicle license and ID card in advance to avoid unnecessary trips. While Saturday inspections save you from taking leave, expect crowds and queues – arriving early saves time.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

How often should the Verna thermostat be replaced?

The general replacement interval for the Verna thermostat is approximately 50,000 kilometers. Based on an annual mileage of 20,000 kilometers, the thermostat's service life is typically around 2-3 years. Below is an introduction to the thermostat: 1. The function of the thermostat is to control the coolant's circulation mode. When the thermostat opens, the coolant undergoes a large circulation, and when it closes, the coolant undergoes a small circulation. 2. The large circulation flow path is: water jacket → thermostat main valve → radiator upper water chamber → cooling tube → radiator lower water chamber → water pump inlet → water pump → water jacket. The small circulation flow path is: water jacket → thermostat bypass hole → bypass pipe → water pump inlet → water pump → water jacket. 3. A damaged thermostat has two main effects: first, incomplete combustion in the car, leading to increased fuel consumption; second, excessive heat dissipation wastes fuel, as the energy from gasoline fuel converts to heat, and excessive heat dissipation accelerates engine wear.
6
1
Share

How to Deal with Black Smoke from Motorcycle Exhaust Pipe?

Motorcycle exhaust pipe emits black smoke solution: 1. Replace a slightly smaller idle jet; 2. Adjust the height of the float; 3. Activate the enrichment valve; If the gap between the needle and the main nozzle is too large, replace with standard new parts. Motorcycle classifications are: 1. Street bikes; 2. Road racing motorcycles; 3. Off-road motorcycles; 4. Cruisers and touring bikes. A motorcycle is a two or three-wheeled vehicle driven by a gasoline engine, steered by handlebars for front wheel direction, lightweight and agile, fast-moving, widely used for patrol, passenger and cargo transport, and also as sports equipment. The motorcycle consists of an engine, transmission system, running gear, braking system, and electrical instrument equipment. The transmission system of a motorcycle is composed of primary reduction, clutch, gearbox, and secondary reduction.
16
5
Share

What engine is equipped in the BMW 730?

BMW 730 is equipped with a 2.0-liter turbocharged engine. Here are the relevant details of the BMW 730: 1. The engine features direct injection technology, uses an aluminum alloy cylinder head and block, and is paired with an 8AT transmission. It delivers a maximum torque of 400 Nm, with the maximum torque range between 1,550 and 4,500 rpm, and the maximum power range between 5,000 and 6,500 rpm. 2. The dimensions of the BMW 730 are 5,212 mm in length, 1,902 mm in width, and 1,478 mm in height, with a wheelbase of 3,210 mm. 3. The seat configurations include electric seat memory for the driver and front passenger, second-row seat adjustment function, and rear seat heating function.
16
0
Share

Is there a four-door version of the BMW M6?

There is a four-door version of the BMW M6, named the M6 Gran Coupe. The BMW M6 is a high-performance coupe developed by BMW's M division based on the 6 Series, available in both two-door and four-door versions. In terms of power, the BMW M6 is equipped with a 4.4-liter V8 twin-turbocharged engine, delivering a maximum horsepower of 560 hp, a maximum power output of 412 kW, and a peak torque of 680 Nm. For the transmission, the BMW M6 uses a 7-speed dual-clutch gearbox. The suspension setup features a double-joint spring strut front suspension and a multi-link independent rear suspension. The BMW M6 adopts a front-engine, rear-wheel-drive layout. Its body dimensions are 4871mm in length, 1855mm in width, and 1372mm in height, with a wheelbase of 2781mm.
9
4
Share

How to Remove the Door of a Refine M3?

The process for removing the door of a Refine M3 is as follows: 1. Open the door to its maximum position to facilitate easier access to the hinge supports. 2. Place a support stand under the lower edge of the door to bear its weight and protect the door. 3. Lower the window glass, disconnect the wiring connector between the door and the vehicle body to separate the door wiring harness. 4. Remove the clip at the bottom of the door stopper pin, pull out the pin from the hole, hold the door steady, remove the hinge support connecting bolts, and finally take off the door. Precautions for door removal and installation: 1. Use specialized tools to protect the connecting bolts and door trim from damage. 2. Operate carefully to avoid damaging the paint surface. 3. Before completely removing the door, ensure all wiring connections have been detached to prevent wire breakage. 4. During installation, adjust the gaps according to specifications and ensure the door opens and closes normally and smoothly.
4
3
Share

What are the differences between the RX350 and RX300?

The RX350 and RX300 have the following differences: 1. RX300: Equipped with a 3.0L V6 24-valve 1MZ-FE engine, featuring VVT-i intelligent variable valve timing control system and electronic fuel injection system. It is an all-weather four-wheel-drive multi-purpose sports vehicle, with a maximum output of 220hp/5,800rpm and maximum torque of 222lb-ft/4,400rpm. 2. RX350: Powered by a new 3.5L V6 engine, with a maximum power output of 203kW (276hp)/6,200rpm and maximum torque of 342Nm/4,700rpm. The RX350 is equipped with the latest voice-recognition DVD navigation system, along with VSC, ABS, EBD, BA, and traction control system (TRC).
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.