Is the Mondeo New Energy a Hybrid?

1 Answers
GabrielaLee
07/30/25 6:41am
The Mondeo New Energy is a hybrid. Below is relevant information about the Mondeo: 1. Introduction: One of the highlights of the 2017 Ford New Mondeo is its adoption of Ford's hybrid technology. As Ford's first new energy model introduced to the Chinese mainland market, the Ford New Mondeo Intelligent Hybrid version features a 2.0-liter Atkinson cycle engine and an ECVT electronically controlled continuously variable transmission, achieving a balance between power performance and fuel economy. 2. Features of the Mondeo: The transmission system is paired with a 6-speed automatic manual transmission. In terms of exterior design, the new model has redesigned the grille, front fog lights, and wheel rims compared to the 2018 models on sale. The grille has been changed to a mesh pattern, and chrome trim has been added to the tail lights to enhance texture and sportiness, with no significant changes to other parts. The interior design of the new model remains consistent with the current models on sale.
Was this review help?
7
5
Share
More Forum Discussions

What is the maximum range of Chery electric vehicles in kilometers?

Electric vehicles generally have an average range of over 500 kilometers. Below are the advantages of electric vehicles and factors affecting their range: Advantages of electric vehicles: Pure electric vehicles use electrical energy, emitting no exhaust gases during operation and thus causing no environmental pollution. Electric vehicles have higher energy utilization efficiency compared to gasoline-powered vehicles. Factors affecting range: Battery high and low temperature technology, optimization of battery BMS technology, upgrades to the vehicle's energy recovery system, lightweight body design, energy-saving technologies for hardware equipment, etc. Additionally, external driving conditions, air resistance coefficient, mechanical transmission efficiency, vehicle weight, number of passengers, and other factors can all impact the actual range of electric vehicles.
20
1
Share

What is the channel number of the high-pressure fuel pump for the Volkswagen CC?

The channel number of the high-pressure fuel pump for the Volkswagen CC is 106. High-pressure fuel pump: The main components of the high-pressure fuel pump, including the three bodies (pump body, front cover, and rear cover), are made of Q235 ordinary carbon steel. Gears, thrust plates, and other parts are made of alloy structural steel and undergo special heat treatment processes, significantly improving the hardness and wear resistance of each component. Volkswagen CC: It is a sports sedan under FAW-Volkswagen. The tires are Michelin PS3 series with a size of 235-45-R17. In terms of body dimensions, the length, width, and height are 4817mm, 1855mm, and 1417mm, respectively.
11
4
Share

What causes frequent fuel nozzle tripping in BMW X6?

Frequent fuel nozzle tripping in BMW X6 may be caused by design issues or product quality problems with the fuel nozzle. Design issues: If it's a design problem, it could be due to poor fuel tank venting performance during refueling. This may result from inadequate fuel tank refueling tests, where the venting performance is related to the fuel tank's liquid level control valve or level tube. Product quality problems: If excessive gasoline vapor is generated during refueling, it can clog the vehicle's charcoal canister, preventing complete vapor discharge. This leads to blockage of the vent hole by large amounts of gasoline vapor, creating high pressure. The system then mistakenly interprets this as a full tank and stops refueling, causing the nozzle to trip.
15
2
Share

Why does the new Santana automatic transmission have a jerky feeling when shifting from first to second gear?

New Santana automatic transmission may have a jerky feeling when shifting from first to second gear due to valve body blockage or engine issues. Valve body blockage: The jerky feeling when shifting from first to second gear is generally caused by stubborn dirt and impurities inside the transmission. When these contaminants accumulate in the valve body, they form blockages that prevent effective regulation of oil pressure, resulting in jerky shifting. This issue can only be completely resolved by thoroughly cleaning out the stubborn dirt and impurities inside the transmission. Engine issues: In most cases, poor acceleration in a car is closely related to the engine. The ignition system, intake system, and fuel injectors collectively determine fuel combustion, which is also the power source of the engine.
8
4
Share

What causes the BMW 740's small lights to stay on and not turn off?

BMW 740 small lights stay on and cannot be turned off due to reasons such as switch damage, wiring issues, or problems with the light status. Switch damage: The interior lighting system generally has three modes: always on, always off, and lights on when the door is open. It could be that the switch is set to always on, which naturally prevents the lights from turning off; or the switch might be damaged, keeping the lights on continuously. Wiring issues: There might be a problem with the wiring, requiring checks on the voltage and resistance of the circuits. Light status problems: Another possibility is that the lights are set to turn on when the door is open, and they take a while to turn off after entering the car, so sometimes it's not due to light damage.
4
5
Share

Does the BMW rear axle oil need to be replaced?

BMW rear axle oil needs to be replaced. There is no fixed interval for replacing the rear axle oil, as it depends on the driving conditions and environment of the vehicle. Additionally, the replacement intervals vary among different oil brands, generally around 20,000-30,000 kilometers. Functions of rear axle oil: Lubricates the transmission system, reduces wear on gears and other moving parts, ensures normal operation of the transmission system, and extends its service life; minimizes friction and transmission losses outside of gear transmission, improving mechanical efficiency. Signs for replacement: If noticeable discoloration or thinning of the rear axle oil is observed during routine maintenance, it should be replaced immediately.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.