Is the Mistra a B-segment car?

1 Answers
VanJayden
07/29/25 4:18pm
The Mistra is a B-segment car. Taking the 2021 Mistra as an example, it is a mid-size sedan with the following dimensions: length 4780mm, width 1815mm, height 1460mm, a wheelbase of 2770mm, a minimum ground clearance of 116mm, and a curb weight of 1357kg. The 2021 Mistra features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine that delivers a maximum horsepower of 170PS, a maximum torque of 253Nm, and a maximum power output of 125kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
15
1
Share
More Forum Discussions

How to Replace the Wiper Blades on a Nissan Tiida?

Here are the steps to replace the wiper blades on a Nissan Tiida: 1. Press the start button twice to power on the vehicle and then turn it off, or start the engine and then turn it off. 2. Within 30 seconds after turning it off, pull up the wiper control lever and hold it for one second. 3. The wipers will enter maintenance mode. 4. At this point, you can replace the old wiper blades with new ones. Relevant information about wiper blades is as follows: 1. They can remove rain, snow, and dust from the windshield that obstruct the view, so they play a crucial role in driving safety during rainy weather. 2. Generally, the lifespan of wiper blades is about one year, but the specific replacement time depends on their working condition. 3. If the windshield is usually dirty, you can clean it with a cloth first before activating the wipers, which can extend their lifespan. Avoid dry wiping without using windshield washer fluid, as it can cause abnormal wear to the wiper rubber and damage to the wiper motor.
1
5
Share

How to Deal with Citroen C-Quatre Transmission Failure?

Repair process for C-Quatre transmission failure: 1. Use specialized diagnostic equipment to read transmission system fault codes. Common transmission fault codes typically indicate that solenoid valve pressure fails to meet the ECU's preset standard values. When the deviation reaches a certain threshold, the transmission warning light will activate, putting the system into emergency mode. 2. Lift the vehicle and drain the transmission fluid. 3. Remove the transmission oil pan. 4. Dismantle the transmission valve body and replace the main pressure solenoid valve. The two large solenoid valves on top are the main pressure solenoid valve and the lock-up solenoid valve respectively. Replacing the main pressure solenoid valve can resolve this issue. 5. Reinstall the transmission valve body and oil pan, then refill with new genuine transmission fluid. 6. Start the vehicle and use diagnostic equipment to read transmission system data streams, verifying whether main oil pressure has normalized. If parameters are correct, the C-Quatre transmission fault will be resolved.
1
3
Share

What is the valve clearance of the Verna?

Verna valve clearance is as follows: intake valve 0.17-0.23mm, exhaust valve 0.22-0.28mm. Valve clearance is set to ensure the normal operation of the internal combustion engine's valve train. Since the valve train operates at high speed and high temperature, components such as valve tappets and valve stems will expand when heated, automatically pushing open the valves, causing the valves and valve seats to not close tightly, resulting in air leakage. Below is relevant information about valve clearance: 1. The side valve is structurally the simplest. Due to this valve design, the engine's anti-knock performance and high-speed performance are poor, so it is only used in engines with low compression ratios and low speeds. 2. The overhead camshaft valve is the most ideal in terms of performance. It can meet the requirements of current high-speed, high-compression-ratio, high-power models while maintaining good fuel economy, so it is widely used. 3. The bottom valve structure is more complex. Currently, it is only used in countries such as the United States and former West Germany's Italy.
3
0
Share

What is the engine oil specification for the Volkswagen Sagitar 1.6?

The engine oil specifications for the Volkswagen Sagitar 1.6 are: Mineral oil 5W40 or 10W40, semi-synthetic oil 5W40, and fully synthetic oil 0W30. Below is a partial introduction about the Volkswagen Sagitar: 1. The Volkswagen Sagitar is a highly popular car with excellent sales. Although its price is somewhat higher compared to similar cars, it boasts superb craftsmanship, a stylish and elegant design, a comfortable interior, and a more solid and comfortable chassis. Additionally, it offers substantial discounts, making it the first choice for many. 2. The Sagitar 1.6 is compatible with a wide range of engine oil types, offering a broad selection with minimal price differences. You can use either specialized engine oil, semi-synthetic oil, fully synthetic oil, or mineral oil.
8
2
Share

What is the engine model of the Volkswagen Phideon?

Volkswagen Phideon's engine model is EA888. The following is a detailed explanation of the Volkswagen EA888 engine: 1. The Volkswagen EA888 engine is a newly designed engine by Volkswagen, integrating advanced technologies such as direct fuel injection, turbocharging, and variable valve timing. With ample low-speed torque, excellent fuel economy, and top-tier reliability, it has gained widespread market recognition, achieving a balance between power and economic environmental protection. 2. The EA888 engine employs intake variable valve timing technology, which effectively improves intake and exhaust efficiency. This is primarily achieved through a vane-type hydraulic adjuster located on the intake camshaft to enable variable valve timing. The vane-type adjuster consists of an outer shell, an internal vane rotor, and a locking pin inside the vane rotor. The outer shell is fixed to the external timing gear and driven by the crankshaft. The internal vane is directly fixed to the intake camshaft and rotates with it. Its working principle involves controlling the hydraulic oil in the corresponding pipeline through the camshaft adjustment valve to drive the vane in the adjuster, thereby rotating the camshaft to advance or delay the opening and closing of the valves, with an adjustable range of up to 60° of crankshaft angle.
7
1
Share

Where is the car battery located in the Audi Q5?

The car battery of the Audi Q5 is located in the trunk. Lift the protective panel behind the spare tire near the car door to see the battery. The car battery, also known as a storage battery, is a type of battery and is categorized into regular batteries, dry-charged batteries, and maintenance-free batteries. The working principle of the battery is to convert chemical energy into electrical energy. Taking the 2018 Audi Q5 Classic Edition as an example, it is a mid-size SUV with body dimensions of: length 4629mm, width 1898mm, height 1655mm, a wheelbase of 2807mm, a fuel tank capacity of 75 liters, and a trunk capacity of 540 liters.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.