Is the MG 6 a Joint Venture or Domestic Vehicle?

1 Answers
LaNadia
07/30/25 2:57am
MG 6 is a domestic vehicle. The MG brand belongs to Shanghai Automotive Industry Corporation (Group), abbreviated as SAIC. Additional Information: Below is an introduction to the MG 6: 1. Development of the MG Brand: The MG brand was initially acquired by Nanjing Automobile (Group) Corporation. Later, SAIC acquired Nanjing Automobile Group and successfully launched models such as the MG 6, MG 3, and MG 3xcross. 2. Specific Details of the MG 6: The production line of the MG 6 was modified from the original British Rover production line, and the engine largely retains the British Rover K-series engine, with some modifications and adjustments made domestically. Overall, the sheet metal, paintwork, chassis, and other technologies of MG vehicles can rival or even surpass those of joint venture vehicles. However, the automatic transmission and lightweight aspects are slightly behind.
Was this review help?
4
3
Share
More Forum Discussions

What is the difference between an off-road vehicle and an SUV?

The differences between an off-road vehicle and an SUV are: 1. Different body structures: Off-road vehicles use a body-on-frame structure; SUVs use a unibody structure. 2. Different suspensions: Off-road vehicles use double-wishbone independent suspension and solid axle suspension; SUVs use MacPherson strut independent suspension. 3. Different tires: Off-road vehicles use all-terrain tires with coarse tread patterns and larger gaps between tread blocks; SUVs use highway tires with softer sidewalls and finer tread patterns. 4. Different engines: Off-road vehicles are equipped with low-speed, high-torque engines; SUVs are equipped with high-speed engines. 5. Different driving environments: Off-road vehicles are suitable for driving in harsh off-road and mountainous conditions; SUVs are suitable for daily life, travel, and outdoor leisure driving.
9
5
Share

What car has a logo with three circles inside one circle?

The logo featuring three circles inside one circle belongs to the Jiangxi Isuzu Ruimai. Taking the 2018 Jiangxi Isuzu Ruimai Classic Edition 4WD Luxury model as an example, it is a pickup truck with the following dimensions: length 5305mm, width 1860mm, height 1785mm, wheelbase 3095mm, and a fuel tank capacity of 76 liters. The 2018 Jiangxi Isuzu Ruimai Classic Edition 4WD Luxury model is equipped with a 2.8L turbocharged engine, delivering a maximum horsepower of 116ps and a maximum power of 85kw. It is paired with a 5-speed manual transmission. The suspension system consists of a double-wishbone coil spring independent front suspension and a leaf spring non-independent rear suspension.
4
4
Share

What does trouble code P0132 indicate?

The causes for displaying trouble code P0132 are: 1. Damaged wiring harness of the pre-catalytic converter oxygen sensor; 2. Faulty pre-catalytic converter oxygen sensor; 3. Malfunctioning engine control module. The solutions for trouble code P0132 are: 1. Check for loose connections in the wiring and plugs; 2. Inspect the exhaust system and readjust the sealing; 3. Replace the faulty pre-catalytic converter oxygen sensor. Trouble codes refer to: Codes detected by the vehicle's computer after a fault occurs, helping technicians accurately locate and repair the faulty component.
17
1
Share

What Causes Black Streaks on White Cars After Rain?

The reason for black streaks appearing on white car surfaces after rain is: calcium oxide carried in rainwater deposits on the vehicle and forms these marks. They can be removed using water stain cleaners, cleaning wax, or clay bars. Methods for maintaining white cars include: 1. Regularly remove dust from the vehicle before, during, and after use to reduce static electricity's attraction of dust; 2. Rain spots on the car body will gradually shrink after rain, increasing the concentration of acidic substances in the rainwater, so rinse with clean water as soon as possible to avoid damaging the paint; 3. Use specialized car wash detergent and neutral water for cleaning, avoiding highly alkaline detergents or dish soap, to prevent stripping the paint of its protective oils and accelerating paint aging.
4
3
Share

Should the BYD Han use 95-octane or 92-octane gasoline?

According to the official vehicle manual recommendation, the BYD Han should use 92-octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the BYD Han's fuel filler cap will also indicate the recommended octane rating. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade. High-compression engines can also be tuned to use lower-octane fuel, as factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane value and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the BYD Han occasionally uses the wrong gasoline grade, simply switch back to the correct octane rating after refueling. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane fuel, using higher-octane gasoline will not cause damage, but the increased octane value alters the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane fuel, using lower-octane gasoline can cause engine knocking. Due to the significantly lower octane value, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance leads to unstable engine operation. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates critical engine conditions, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.
20
5
Share

What are the differences between US-spec and China-spec cars?

The differences between US-spec and China-spec cars are: 1. Different meanings: US-spec cars refer to vehicles produced to comply with US traffic regulations; China-spec cars refer to vehicles produced to comply with Chinese traffic regulations. 2. Different language displays: The dashboard and center console of US-spec cars are displayed in English; those of China-spec cars are displayed in Chinese. 3. Different turn signal bulb colors: US-spec cars have red turn signal bulbs; China-spec cars have yellow turn signal bulbs. 4. Different odometers: The odometer on US-spec cars uses miles; the odometer on China-spec cars uses kilometers. 5. Different headlights: US-spec cars use the same bulb for parking lights and headlights; China-spec cars use two separate bulbs.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.