Is the Mercedes EQC an electric vehicle?

How much engine oil does the Ford Edge require?

Ford Edge 2.0t requires 5.5 liters of engine oil, while the 2.7t requires 6.5 liters. The Edge uses Ford-specific engine oil, with the original factory specification being 5W30 semi-synthetic oil. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Ford Edge is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing; start the engine and let it run for 30 seconds to allow oil in the main oil passages to drain out; use a specialized wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; add new oil through the engine valve cover filler port, typically filling about three-quarters of a standard oil container; start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter—repair if necessary; after stopping the engine, pull out the dipstick to ensure the oil level is within the standard range.

17

5

Share

Why Must Overtaking Be Done on the Left Side?

Overtaking must be done on the left side for the following reasons: 1. Traffic laws stipulate that vehicles should keep to the right, so overtaking from the right can easily lead to collisions. 2. The driver's seat is on the left, providing a broader field of vision, making left-side overtaking safer. 3. Left-side overtaking aligns with human habits. Overtaking should be completed quickly under safe conditions, and the following key points should be noted: 1. Keep an eye on all directions. Before overtaking, always observe the condition of the lane you intend to use and the driving situation of the vehicles ahead of the car you plan to overtake. 2. Downshift to increase speed. To improve throttle response and increase torque for quicker acceleration, automatic transmission models should press the accelerator pedal to the floor quickly, while manual transmissions should downshift first and then press the accelerator pedal rapidly to accelerate. 3. Be flexible. Avoid continuous lane changes during overtaking. After completing a lane change, accelerate in a straight line, observe the rear to ensure safety, and then return to the original lane. 4. Slow down when encountering stationary vehicles. When overtaking a stationary vehicle ahead, especially on narrow roads, proceed slowly and be prepared to stop at any time to prevent a collision in case the stationary vehicle suddenly opens its door.

12

0

Share

Which is the brake and which is the accelerator in an automatic transmission?

In automatic transmission vehicles, the left pedal is the brake, and the right pedal is the accelerator. Additional information about automatic transmissions is as follows: 1. Automatic transmission cars do not have a clutch. There is no clutch pedal in automatic transmission cars; gear shifting is controlled by the computer. 2. For automatic transmission cars, insert the key, press the brake pedal, shift from P (Park) to N (Neutral), turn the key to start the engine, shift to D (Drive), and release the brake to start moving. 3. When shifting gears in an automatic transmission car, you must press the brake. Shift gears only after the vehicle has come to a complete stop to prevent shifting into reverse while the vehicle is in motion.

8

2

Share

How often should a major car maintenance be performed?

Major car maintenance is typically performed every three years or 60,000 kilometers. The main components of a major car maintenance include: 1. Oil change. An oil change is a mandatory part of major maintenance. Engine oil lubricates and reduces friction, aids in cooling, seals against leaks, prevents rust and corrosion, and provides shock absorption. 2. Oil filter replacement. The oil filter is replaced at the same time as the oil. The oil filter removes debris, sludge, and moisture from the oil, delivering clean oil to the lubrication points. 3. Air filter replacement. The air filter prevents dust and particles from being drawn into the engine during the intake process. If the filter is not cleaned regularly, dust can enter the engine, causing abnormal wear on the cylinder walls. 4. Cabin air filter replacement. If the cabin air filter is not cleaned or replaced for a long time, the car's air conditioning system can become contaminated, reducing the performance of the cooling system and potentially affecting the health and safety of passengers.

10

3

Share

How to reset the maintenance light on a BMW X3?

You can reset it through the central control display screen. Here are the specific operation steps: 1. First, press the ignition switch to start the vehicle. 2. Then, click the MENU button on the central control panel. 3. Vehicle information will be displayed on the central control screen. 4. Next, press and hold the cancel button on the multifunction steering wheel. 5. The vehicle maintenance information will then be reset, and you can see the maintenance reminder light on the central control turn off. Below is some relevant information about the maintenance light: 1. It records the mileage of some crucial components, similar to a timer in a sprint race. 2. It serves to remind both the car owner and vehicle maintenance personnel. If relevant parts are replaced, the corresponding vehicle maintenance light will be reset.

7

5

Share

What Causes the Steering Wheel to Be Off-Center After Tire Replacement?

The reason for the steering wheel being off-center after tire replacement: The difference in wear between new and old tires can cause the vehicle to pull to one side. Solution for the steering wheel being off-center after tire replacement: Have a four-wheel alignment performed at a 4S shop or repair facility. Additional information about four-wheel alignment is as follows: 1. Four-wheel alignment is based on the four-wheel parameters of the vehicle, with adjustments made to ensure good driving performance and a certain level of reliability. 2. For cars, the installation of the steering wheels, steering knuckles, and front axle has a specific relative position. This installation with a specific relative position is called steering wheel alignment, also known as front-wheel alignment. Similarly, the rear wheels also have a relative position in their installation with the rear axle, known as rear-wheel alignment.

11

4

Share

Is the Mercedes EQC an electric vehicle?

How much engine oil does the Ford Edge require?

Why Must Overtaking Be Done on the Left Side?

Which is the brake and which is the accelerator in an automatic transmission?

How often should a major car maintenance be performed?

How to reset the maintenance light on a BMW X3?

What Causes the Steering Wheel to Be Off-Center After Tire Replacement?

When to Replace the Elantra Spark Plugs?

How to Use Car Antifreeze Correctly?

What are the advantages of MacPherson suspension system?

How to Check for Car Air Conditioning Leaks?