Is the Mercedes-Benz S-Class a Maybach?

1 Answers
WalkerDella
07/29/25 8:36pm
The Mercedes-Benz S-Class is not a Maybach. Here is the relevant information: Reason: Due to poor market performance, the Maybach series of sedans was completely discontinued in 2013. On November 19, 2014, Mercedes-Benz officially launched the new sub-brand Mercedes-Maybach in Guangzhou, and the first model under this brand, the Maybach S-Class, made its global debut. Mercedes-Benz S-Class Assistance Systems: Numerous assistance systems help enhance driving and riding comfort, making the life of the S-Class driver easier and more enjoyable. The parking component rearview camera provides the driver with a better view of the rear area, making reverse parking operations more convenient and safe. The wide-angle lens is installed below the trunk handle. When reverse gear is selected, the rearview camera automatically activates, immediately capturing the area behind the vehicle and transmitting the image to the cockpit management and data system display. The parking component also includes a parking positioning system with a parking guidance system.
Was this review help?
5
1
Share
More Forum Discussions

What are the symptoms of a faulty car temperature sensor?

Symptoms of a faulty car temperature sensor: 1. When the car's temperature sensor is damaged, the engine will overheat, and a yellow coolant temperature warning light will appear on the dashboard to alert the driver to check it; 2. After the car's temperature sensor is damaged, the car may also experience difficulty starting when cold, because the car will determine that the engine oil and coolant temperatures are too low, preventing normal operation, making it hard to start the engine. The car temperature sensor controls the temperature of the engine oil and coolant, helping the engine run more efficiently. When the car temperature sensor is damaged, the normal operation of the engine will be affected, potentially leading to engine overheating. In such cases, it is necessary to promptly repair or replace the car's temperature sensor.
10
4
Share

How to Install a Car Spoiler?

Car spoiler installation steps are: 1. Prepare the spoiler, installation tools, and clean the trunk lid; 2. Determine the installation position; 3. Drill appropriate holes with an electric drill; 4. Fix the spoiler in place and tighten it with fixing bolts; 5. Clean the spoiler and installation area after completion, then apply a layer of wax. A car spoiler refers to the protruding ducktail-shaped part installed at the rear end of the car trunk lid, which is part of the car's aerodynamic kit. Its main function is to reduce the lift at the rear of the vehicle.
4
3
Share

Why do cars need to add urea now?

Nowadays, cars add urea mainly to meet emission standards. Only diesel vehicles require urea addition. National regulations mandate that electronically controlled diesel engine vehicles must add urea because diesel vehicles emit higher levels of exhaust gases. Adding urea can reduce carbon oxides in the exhaust and lower pollutant emissions, making diesel vehicles more environmentally friendly. Currently, most diesel engines use Selective Catalytic Reduction (SCR) technology, meaning that after the engine exhaust is discharged from the turbocharger, it needs to pass through a catalytic converter before entering the vehicle's exhaust pipe. The urea nozzle on the exhaust pipe will spray urea under the control of the onboard computer.
9
1
Share

Why Should You Add Antifreeze to Your Car in Summer?

Reasons for adding antifreeze to your car in summer: It can prevent the engine coolant from boiling. Antifreeze is a liquid composed of antifreeze additives, additives that prevent metal corrosion, and water. It has the properties of antifreeze, anti-corrosion, heat conduction, and non-deterioration. Methods for adding antifreeze: 1. Wait for the car to cool down, open the engine compartment to check for cracks and signs of leakage in the pipes; 2. Open the radiator drain valve to release the antifreeze; 3. Use a rubber tube to introduce tap water into the tank, allowing the tap water to flow through the engine's cooling system to clean the radiator until clear water comes out of the radiator; 4. After draining the water, close the radiator drain valve and add antifreeze to the radiator's filling port until it is full; 5. Open the lid of the liquid storage tank and add antifreeze until it reaches the higher mark line.
6
0
Share

What is the difference between Audi A3 and Audi S3?

One is the S series, which is Audi's high-performance emblem, and the other is just the ordinary A series, with the key difference lying in performance. Below are the distinctions between the two: 1. As a performance model, the S3, despite sharing the same 2.0T engine with the A3, boasts significantly higher power parameters. With the same cylinder size, the S3 delivers an additional 50kW and 30Nm of power compared to the A3. 2. In terms of dimensions, there is not much difference. The minor discrepancies of a few millimeters are merely due to suspension tuning and aerodynamic kits, which can be largely ignored. 3. For the interior, the S3 features a flat-bottom steering wheel that is moderately thick and exquisitely designed, promising an excellent grip. The sporty red and black interior combination is highly effective in stimulating the driver's fighting spirit. In contrast, the A3's interior is much more conventional, fitting the standard family car category.
7
1
Share

Why should you turn off the air conditioning before turning off the car?

Leaving the air conditioning on after turning off the car can reduce the battery's lifespan. This is because the engine cannot drive the compressor after the car is turned off, making the air conditioning unable to cool. The car's battery powers the air conditioning when the engine is not running. The alternator is the main power source of the car, functioning to supply power to all electrical devices (except the starter) while the engine is running normally, and simultaneously charging the battery. Based on the three-phase stator winding of a conventional alternator, the number of winding turns is increased, and additional terminals are added, along with an extra three-phase bridge rectifier. At low speeds, the output is from the original winding and the additional winding in series, while at higher speeds, only the original three-phase winding provides the output.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.