Is the Mercedes-Benz R350 a full-time four-wheel drive?

2 Answers
ZacharyFitz
07/24/25 12:49am
Mercedes-Benz R350 is a full-time four-wheel drive. Introduction to four-wheel drive systems: There are three common four-wheel drive systems in cars, namely full-time four-wheel drive system, part-time four-wheel drive system, and on-demand four-wheel drive system. Introduction to full-time four-wheel drive system: All four wheels have power at all times. Some cars have very intelligent full-time four-wheel drive systems, which can distribute torque to all four wheels. Advantages of full-time four-wheel drive: Full-time four-wheel drive is the transmission method with the highest cornering limit on highways. It can distribute the optimal driving force to each wheel during high-speed cornering. Therefore, this technology is widely used in large-displacement sedans that emphasize handling performance, with the main purpose of improving effective driving force and cornering limits.
Was this review help?
10
1
Share
SanJohnny
08/10/25 8:33pm
I previously drove a Mercedes-Benz R350, which was equipped with Mercedes' 4MATIC system. This is a full-time four-wheel drive system, meaning it drives all four wheels continuously, regardless of weather conditions. It's much better than some models that only activate four-wheel drive when slipping occurs, significantly improving stability and traction in rain or snow. I remember during a winter mountain road test drive, the car hardly ever slipped, and my family felt safe inside. This system uses electronic torque distribution, reacts quickly to road conditions, and optimizes the driving experience. However, it's worth noting that full-time four-wheel drive may slightly increase fuel consumption, but Mercedes' tuning minimizes the average impact. During maintenance, it's important to check the sensors and differential to avoid performance issues caused by faults. Overall, if you care about safety and handling, this car with full-time four-wheel drive is a wise choice.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to reset the trip?

trip reset methods are as follows: 1. Mechanical meter: (1) There is a protruding small round button on the dashboard. Press and hold this button for a while to reset the meter. (2) Remove the dashboard, take off the upper cover of the meter, and remove the pointers for speed, fuel gauge, water temperature, and RPM. Then use a flat-head screwdriver to adjust the mileage gear, which can roll back or reset. 2. Electronic meter: The mileage data is stored in an encrypted form on the chip of the dashboard. To reset, you need to clear the data storage location on the chip and then directly input the desired mileage data into the corresponding location on the chip. After reinstalling the chip into the dashboard, it will display the desired mileage. The simplest way to reset is to directly replace the dashboard with a new one.
8
1
Share

Is a Qualification Certificate Required to Drive a Truck?

Trucks with a gross mass exceeding 4.5 tons require a qualification certificate, while those with a gross mass of 4.5 tons or less do not. Relevant details are as follows: According to the "Notice of the General Office of the Ministry of Transport on the Cancellation of Road Transport Certificates and Driver Qualification Certificates for Ordinary Cargo Vehicles with a Total Mass of 4.5 Tons or Less," starting from January 1, 2019, the management of qualification certificates for ordinary cargo transportation and vehicle operation certificates for vehicles of 4.5 tons or less will be temporarily implemented as follows: 1. Starting from January 1, 2019, transportation management departments across the country will no longer issue road transport certificates for ordinary cargo vehicles with a total mass of 4.5 tons or less. 2. Starting from January 1, 2019, for ordinary cargo vehicles with a total mass of 4.5 tons or less engaged in ordinary cargo transportation activities, transportation management departments across the country shall not impose administrative penalties on such vehicles or drivers on the grounds of "unlicensed operation" or "driving road passenger and cargo transport vehicles without obtaining the corresponding qualification certificate."
16
4
Share

Is the GAC Trumpchi GS4 cost-effective?

GAC Trumpchi GS4 offers excellent value for money. Below are its pros and cons: Pros: 1. In terms of appearance, the overall design is robust yet sporty. The five-spoke alloy wheels feature a new style, giving a fashionable look. 2. Regarding configuration, the Trumpchi GS4 is generous with safety features. The Comfort trim, except for the manual transmission variant, comes equipped with ESP stability control, hill-start assist, hill descent control, and rear parking sensors as standard across all models. 3. Fuel consumption is satisfactory, with the 1.5T version averaging around 7/8 liters per 100km for manual/automatic transmissions. Cons: 1. Although the car has independent suspension front and rear, the tuning is somewhat stiff, compromising comfort on rough roads. 2. The engine lacks punch at low RPMs, and there's noticeable lag when accelerating hard by stomping the throttle. 3. There are too few interior color options, only available in dark tones.
19
5
Share

How to reset the tire pressure warning light on Changan CS55?

Method to reset the tire pressure warning light on Changan CS55: There is a circular operation button in the middle of the right side of the Changan CS55 cockpit. First, turn on the ignition switch without starting the car. Then press the operation button, and options will appear on the central display screen. Select the "Vehicle Information" option and click OK, then the reset items will appear. Find the tire pressure reset and follow the on-screen system prompts to reset the tire pressure settings. Below is some related information: 1. When the tire pressure warning light comes on, it indicates that the pressure in one or more tires is too low or too high. When the vehicle's tire pressure monitoring system detects an abnormality, a warning message will appear on the display screen, and the tire pressure warning light will illuminate. 2. If the tire pressure warning light comes on while driving on the highway, do not panic. Immediately reduce your speed and avoid sharp steering and sudden braking, then check the tires. If you find that the tire pressure is significantly low, you can drive to the nearest service area for inspection and repair. 3. Generally, the standard tire pressure for small cars is between 2.4-2.5 bar. Both overinflation and underinflation can affect tire performance. Overinflation can affect braking power, while underinflation can cause rapid wear on the tire sidewalls. Continued driving with low pressure can lead to sidewall rupture and even tire blowouts. Always refer to the car's maintenance manual for the standard tire pressure.
10
1
Share

What is the function of the activated charcoal canister in a car?

The function of the activated charcoal canister in a car is to absorb gasoline vapors that escape from the fuel tank and carburetor when the engine is turned off. When the engine starts, the absorbed gasoline is then blown out and burned. Additional relevant information is as follows: 1. The gasoline vehicle fuel vapor adsorption and desorption device, commonly known as the 'carbon canister,' is an apparatus designed to reduce the emission of gasoline vapors from the car's fuel tank and carburetor. 2. Since gasoline is a volatile liquid, the fuel tank is often filled with gasoline vapors at normal temperatures. The fuel evaporation emission control system's role is to direct these vapors into the combustion process and prevent them from evaporating into the atmosphere. 3. The automobile engine's activated carbon canister has three outlets: the top two outlets connect to the fuel tank and the activated carbon canister solenoid valve, respectively, while the bottom outlet vents to the atmosphere.
6
0
Share

When will the new BMW 3 Series be launched?

2021 BMW 3 Series will be launched in September. Here are the specific details about the new BMW 3 Series: 1. The length, width, and height of the BMW 3 Series are 4719mm, 1824mm, and 1459mm respectively, with a wheelbase of 2851mm. 2. The front face of the BMW 3 Series still features the kidney-shaped grille, and the headlights use full LED light sources, equipped with laser high beams and adaptive turning functions. 3. In terms of power, the 2021 BMW 3 Series 30i/Li models are equipped with a high-power 2.0T engine, with a maximum power of 190kW (258 horsepower) and a peak torque of 400Nm. The transmission is matched with an 8-speed automatic manual transmission.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.