Is the Mercedes-Benz GLC compliant with China VI emission standards?

2 Answers
DeLaura
08/31/25 7:40am
The currently available Mercedes-Benz GLC models all comply with the China VI emission standards. There are three powertrain versions: 2.0L turbocharged with 184 horsepower, 2.0L turbocharged with 211 horsepower, and 2.0L turbocharged with 245 horsepower. Below is a brief introduction to the Mercedes-Benz GLC: 1. All three powertrain versions are equipped with the "274920" engine and a 9-speed automatic transmission (AT). They all feature full-time four-wheel drive with only slight differences. 2. In terms of interior, the 2019 Mercedes-Benz GLC further emphasizes its luxurious product positioning on the original basis. In addition to all the traditional configurations, the 2019 GLC not only enhances its technological feel through interior decorations, extensive leather wrapping, and exquisite craftsmanship in details but also provides a comfortable environment for drivers and passengers by considering comprehensive and meticulous lifestyle aspects. 3. The 9-speed automatic transmission used by the engine elevates efficiency, comfort, and dynamics to new heights. Additionally, consecutive downshifts assist in achieving rapid and powerful acceleration.
Was this review help?
20
3
Share
SanMary
09/13/25 3:57am
The Mercedes-Benz GLC certainly complies with the China VI emission standards. I've conducted in-depth research on automotive emission systems. China VI is divided into phases a and b, which are particularly stringent, and have been implemented nationwide since 2020, requiring control over particulate matter and nitrogen oxide emissions. As a premium brand, Mercedes-Benz has long upgraded the GLC's engine. The new models are equipped with advanced catalytic converters and electronic control systems to ensure compliance with China VI b standards. For example, the optimized version of the 2.0T engine can reduce pollutants by over 30%, coupled with intelligent combustion efficiency adjustments, ensuring smooth driving and fuel efficiency. If you're a tech enthusiast, you can check the environmental information on the vehicle conformity certificate for detailed emission levels. Overall, choosing the GLC isn't just about luxury—it also helps reduce environmental pollution, a win-win situation.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

How to Apply for Motor Vehicle Registration?

To apply for motor vehicle registration, you need to fill out the "Motor Vehicle Registration Application Form" and the "Unified Invoice for Motor Vehicle Sales". For domestically produced vehicles, provide the vehicle factory certificate; for imported vehicles, provide the import certificate, and provide the tax payment certificate or tax exemption certificate for vehicle purchase tax. Also, provide the identity proof of the motor vehicle owner. The following is the registration process: 1. Fill out the "Motor Vehicle Registration, Transfer, Cancellation/Transfer Application Form" at the guidance counter with the required documents; 2. Pay the certification fee; 3. Apply for vehicle inspection at the inspection station; 4. Take a number at the number calling area and wait in the waiting area for your number to be called; 5. After your number is called, go to the designated window to complete the registration procedures and receive the registration certificate, vehicle license, and inspection qualification mark.
4
3
Share

What is the actual measured ground clearance of the Haval F7?

The minimum ground clearance of the Haval F7 is 147mm. Suspension structure of Haval: The rear suspension is a double-wishbone independent suspension, providing multiple terrain driving modes. The entire lineup features independent rear suspensions, all designed for comfort, effectively absorbing bumps and vibrations on the road. Standard for vehicle ground clearance: The standard ground clearance for vehicles ranges between 110mm and 150mm, while SUVs typically have a minimum ground clearance of 200mm to 250mm. Each vehicle comes with an unladen ground clearance specified by the manufacturer. The amount of ground clearance primarily indicates the vehicle's off-road capability and has no relation to performance.
3
2
Share

Does the BMW 316 consume engine oil severely?

BMW 316 consumes engine oil relatively severely. Reasons for BMW engine oil consumption: Using engine oil of poor quality or with viscosity grades that do not meet the requirements. Oil viscosity that is too low or too high can cause poor engine lubrication, increasing wear on the piston rings and cylinder walls, reducing sealing performance, and leading to oil consumption. Excessive clearance between the piston rings and cylinder walls, improper installation of piston rings, or degraded sealing performance can allow oil from the cylinder walls to enter the combustion chamber, causing oil consumption. Methods to repair engine oil consumption: Overhaul the car's engine, including replacing piston rings, valve stem seals, and other components. Use engine repair additives to alleviate oil consumption. Use specialized carbon removers to release the tension of the piston rings and the elasticity of the seals to mitigate the situation.
6
1
Share

What sound system is equipped in the new Mercedes-Benz E-Class?

Mercedes-Benz E-Class is equipped with BOSE sound system. Advantages of BOSE sound system: BOSE holds a world record for developing the world's smallest 'Jewel Cube' speaker in 1995. The 'special formula' diaphragm material and neodymium iron boron strong magnetic unit make this compact system not only space-saving but also deliver near-perfect stereo effects. Introduction to Mercedes-Benz E-Class: The Mercedes-Benz E-Class is a mid-to-large-sized luxury business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. The recognized ancestor of the E-Class is the 1947 Mercedes 170, one of the first models developed by Mercedes-Benz after World War II.
9
4
Share

Why is the resistance of the driver-side airbag too high?

The reasons for the high resistance of the driver-side airbag are as follows: 1. It may be caused by a loose airbag connector. In this case, it is best to securely fasten the airbag connector under the driver's seat. 2. It could also be due to damage to the slip ring at the lower part of the steering wheel or the main airbag, which would require replacement. Below are the methods to address high airbag resistance: (1) Use a diagnostic tool to connect to the OBD port and check which airbag has high resistance. Then, inspect whether the wiring harness connector of the corresponding airbag is properly connected. (2) Next, check whether the clock spring is conducting electricity normally. If the clock spring fails to conduct electricity, it needs to be replaced. Typically, the airbag issue will be resolved after replacement. (3) If the exact cause of the high airbag resistance is unclear, you can choose to add a resistor or replace the entire airbag.
3
1
Share

Does the Camry require 95 octane gasoline?

The Camry can use 95 octane gasoline. The manufacturer recommends using 92 octane gasoline or higher. The following are details about the use of 92 and 95 octane gasoline: 1. The octane rating of 92 or 95 gasoline represents the fuel's anti-knock performance. The higher the octane number, the greater the isooctane content, indicating better anti-knock performance. 2. The higher the compression ratio, the higher the octane rating of the gasoline used. 3. For engines with a compression ratio greater than 9:1, use gasoline with an octane rating of 90 or higher. 4. For engines with a compression ratio greater than 9.5:1, use gasoline with an octane rating of 92 or higher. 5. When the compression ratio is greater than 10:1, use 95 octane gasoline or higher.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.