Is the Mercedes-Benz E300L imported or domestically produced?

1 Answers
Mandy
07/29/25 9:21pm
The Mercedes-Benz E300L is domestically produced. All domestically produced Mercedes-Benz E-Class models are long-wheelbase versions, while the imported Mercedes-Benz E-Class models are standard-wheelbase versions. The Mercedes-Benz E300L is a mid-to-large-sized sedan under the Mercedes-Benz brand, and its competitors include the BMW 5 Series and Audi A6. The Mercedes-Benz E300L is equipped with three types of engines: a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power of 135 kW and a maximum torque of 280 Nm, with the maximum torque available between 3,000 and 4,000 rpm and the maximum power at 6,100 rpm. The low-power version of the 2.0-liter turbocharged engine delivers a maximum power of 190 kW and a maximum torque of 370 Nm, with the maximum torque available between 1,800 and 4,000 rpm and the maximum power at 6,100 rpm. The high-power version of the 2.0-liter turbocharged engine produces a maximum power of 220 kW and a maximum torque of 400 Nm, with the maximum torque available between 3,000 and 4,000 rpm and the maximum power at 6,100 rpm.
Was this review help?
18
1
Share
More Forum Discussions

How Beginners Can Interpret Parking Sensors

Beginners can interpret parking sensors as follows: The alarm sound from parking sensors indicates the vehicle is very close to an object. The parking camera displays three guideline colors: green, yellow, and red. The green line indicates a safe distance of over 2 meters—reverse with confidence. The yellow line indicates a distance between 0.7 to 1 meter—exercise caution when accelerating or braking. The red line marks 30cm—you must stop. Below is relevant information: 1. Parking Camera: The parking camera captures real-time footage of the area behind the vehicle via a rear-mounted camera. If displayed directly on the screen, the image would appear mirrored (left-right reversed). To help drivers observe more intuitively, the system typically applies a mirror-image correction. 2. Guidelines: These guidelines serve only as a driving aid for visually estimating the approximate distance between the vehicle and obstacles—they cannot provide precise measurements.
8
5
Share

What does 6-speed automatic mean?

Six-speed manual-automatic transmission refers to a gearbox that combines a six-speed manual transmission with an automatic transmission, providing more flexible gear selection and fuel efficiency during driving. Manual Transmission: Manual Transmission (MT), also known as manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. The manual-automatic transmission is a gearbox that combines the functions of both manual and automatic transmissions. Structurally, it mainly consists of a conventional gearbox, an electronically controlled clutch, an automatic shift mechanism, and electronic control components. This technology was developed to enhance the fuel economy and controllability of automatic transmissions, allowing the driver to regain control over shift timing from the computer, thereby improving driving dynamics and enriching the driving experience. Manual-Automatic Transmission: A manual-automatic transmission combines the manual and automatic shifting modes of a car. This type of transmission integrates the advantages of both automatic and manual transmissions, minimizing power loss in the shifting system while improving fuel economy and controllability, as well as enhancing driving dynamics and enriching the driver's experience. AT Transmission: AT transmission, also known as automatic transmission, consists of a torque converter, planetary gear transmission, and control mechanism. It can automatically adjust speed and torque based on road conditions, eliminating the need for clutch operation during gear shifts. It offers fewer gear changes with larger steps, smooth transitions, and ease of operation, but it tends to have slower response times, higher fuel consumption, and is more difficult to repair.
8
3
Share

What are the penalties for a minibus exceeding passenger capacity by 100%?

Minibus exceeding passenger capacity by 100% will result in driver's license revocation and fines. The following are the hazards of overloaded vehicle operation: 1. Damage to road infrastructure: Overloaded vehicles far exceed the design load of roads and bridges, causing pavement damage, bridge fractures, and significantly shortening service life. 2. Increased danger: Overloaded vehicles have greater mass and inertia, longer braking distances, and increased risks. Severe overloading may cause tire blowouts, sudden deviation, brake failure, or rollover due to excessive tire load and deformation. Additionally, overloading affects vehicle steering performance, increasing accident risks due to loss of steering control. 3. Traffic congestion: Overloaded vehicles cannot maintain normal speeds, occupying lanes for extended periods and directly affecting traffic flow.
2
2
Share

What do 261, 145, and 520 mean in Subject One?

Subject One's 261, 145, and 520 are mnemonic techniques using numbers. The specific explanations are as follows: 1. Number mnemonic 261: When visibility on the highway is less than 200 meters, the speed must not exceed 60 km/h, and the following distance must not be less than 100 meters. 2. Number mnemonic 145: When visibility on the highway is less than 100 meters, the speed must not exceed 40 km/h, and the following distance must not be less than 50 meters. 3. Number mnemonic 520: And for visibility less than 50 meters, the speed must not exceed 20 km/h, and the vehicle should exit the highway at the nearest exit as soon as possible. Additional information is as follows: 1. Number mnemonics: Follow the memory principles of modern psychology, mainly utilizing imaginative association and object imagery memory techniques. 2. Imaginative association is the foundation of number mnemonics: The secret of number mnemonics lies in transforming numbers from abstract symbols into vivid imagery.
17
0
Share

Why does Audi exclusively use seven-speed dual-clutch transmissions?

The reasons why Audi exclusively uses seven-speed dual-clutch transmissions are as follows: 1. Reason one: The use of dual-clutch transmissions is to reduce costs, and dual-clutch transmissions have fast shifting speeds and high transmission efficiency. 2. Reason two: The use of dual-clutch transmissions can improve the fuel economy of the vehicle. Information about dual-clutch transmissions is as follows: 1. Dual-clutch transmission: It is a relatively common automatic transmission, and this type of transmission is a product developed based on manual transmissions.
20
1
Share

How to Reduce Tire Noise?

To reduce tire noise, you can adjust the tire pressure to a moderate level, as excessive tire pressure can increase noise. Here is some relevant information: 1. Sound insulation: Good sound insulation in the vehicle is a primary method to reduce tire noise. It involves taking steps such as damping, sound insulation, sound absorption, and buffering along the path through which tire noise propagates into the cabin. The main propagation areas include the chassis, fenders, and wheel arches. 2. Wind noise: Wind noise occurs when the pressure of the oncoming wind exceeds the sealing resistance of the car doors during high-speed driving, entering the cabin. It is primarily generated and transmitted through the door sealing gaps and the overall thin steel panels. The faster the driving speed, the greater the wind noise.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.