Is the Mercedes-Benz C260L Front-Wheel Drive or Rear-Wheel Drive?

1 Answers
VonValentina
07/30/25 4:07am
The Mercedes-Benz C260L is a rear-wheel-drive vehicle. Below is more information about the C260L: Exterior: In terms of interior layout, it features a 12.3-inch full LCD instrument panel and a 10.25-inch multimedia display. The front of the car adopts matrix LED headlights, and the taillights have been changed from the previous willow-leaf design to a C-shaped design, enhancing the lighting effect. Tire Size: The standard model uses 225/40 and 245/35 R19-inch Continental wheels for the front and rear respectively, while the sport version is equipped with 225/50 R17-inch Bridgestone tires. Powertrain: The Mercedes-Benz C260L Sport is powered by a 1.5T+48V hybrid system, paired with a 9-speed automatic transmission, featuring front-engine rear-wheel drive, delivering robust performance.
Was this review help?
6
1
Share
More Forum Discussions

What exactly does the name 'BYD' mean?

The initials 'BYD' stand for 'Build-Your-Dreams,' which is the English abbreviation of the company's name. Although 'BYD' had no special meaning when the company was first established, over time, the name has evolved to carry a special significance. The initials 'BYD' coincidentally represent 'Build-Your-Dreams,' symbolizing the company's mission to help people achieve their dreams. Below is some relevant information about BYD: Brand History: BYD Company Limited was founded in 1995, starting with a team of just over 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Originally a battery manufacturer, BYD's entry into the automotive industry was initially seen as an outsider's move. However, leveraging its 'independent intellectual property rights' and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. Brand Introduction: BYD Auto adheres to a development strategy of independent research, production, and branding, committed to creating affordable and high-quality vehicles for the masses. The product designs incorporate advanced international trends while aligning with the aesthetic values of Chinese culture.
19
1
Share

Do I need to retake the exam when downgrading from C1 to C5?

C1 to C5 requires retaking the exam. C5 is a special driver's license for disabled individuals to operate small automatic passenger vehicles. People with disabilities such as right lower limb impairment, both lower limb impairments, hearing impairment, missing right thumb, or end joint finger defects can apply for a C5 license. Permitted vehicle types for C1: The C1 driver's license allows driving small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special purpose vehicles; small passenger vehicles with seating capacity of 9 or fewer. C1 license holders cannot drive: large buses, tractors, city buses, medium buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, C1 license holders cannot drive vehicles with more than 9 seats or trucks exceeding 6 meters in total length. Age requirements for C1: The minimum age requirement for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities.
3
4
Share

What Causes a Diesel Engine to Emit Black Smoke When Accelerating?

Diesel engine emitting black smoke when accelerating can be caused by the following reasons: 1. Clogged air filter. 2. Fuel injector dripping instead of spraying. 3. Ignition timing issues, generally with minimal impact from spark; early fuel supply timing results in crisp sound and blue smoke, while late timing causes rough running or backfiring with white smoke. 4. Problems with the fuel pump, insufficient plunger pressure. 5. Loose screws on the vacuum tube connecting the turbocharger to the fuel pump, or loose tubes on the turbocharger's intake side. 6. Check if the engine is air-cooled; a dirty air-cooling system can also lead to lack of power and black smoke. Solution: Adjust the fuel injection advance angle, which can be resolved by contacting their after-sales service department.
13
1
Share

Under What Circumstances Should High and Low Beam Headlights Be Switched?

Alternating between high and low beam headlights, first switching to high beam and then back to low beam, includes the following situations: 1. When drivers pass through sharp curves, slopes, overtaking (while simultaneously turning on the left signal), arched bridges, pedestrian crossings, or intersections without traffic signals. 2. During nighttime driving, giving some warning to the vehicle ahead: for example, if an oncoming vehicle is using high beams, making it difficult for the driver to see the road conditions, flashing the headlights twice can remind the other party to switch to low beams. Article 59 of the "Regulations" stipulates: When motor vehicles pass through sharp curves, slopes, arched bridges, pedestrian crossings, or intersections without traffic signal control at night, they should alternately use high and low beam headlights to signal.
2
2
Share

What Causes Being Too Close to the Left Line During Parallel Parking?

This is a common phenomenon in parallel parking. The primary cause is usually related to steering wheel handling. Below are some relevant explanations about parallel parking: 1. Traditional parallel parking: Four poles were placed on the ground to symbolize the four corners of the parking space. One of the criteria for successful parking was whether the vehicle could enter the space without touching these poles. 2. After the implementation of new traffic regulations: Parallel parking no longer uses poles; instead, ground markings are used to define the parking space boundaries. For C1 license trainees, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. The vehicle must be driven parallel to the parking space, then reversed into the space without any pauses. As long as the vehicle is parked within the boundaries without crossing the lines, it is considered a pass.
15
2
Share

How to Reset the Maintenance Light on a Zotye Z300

"Method to reset the maintenance light on a Zotye Z300: Turn off the ignition switch and press and hold the two long buttons on the instrument panel; turn on the ignition switch to make all the instrument lights illuminate; press the two long buttons on the instrument panel until the maintenance light goes off; release the two long buttons after the maintenance light is off; restart the car, and the maintenance light reset is complete. Below is related content: Benefits of regular maintenance: Timely replacement of excessively dirty engine oil effectively protects the engine or transmission, etc. Sometimes, issues that cannot be detected during driving can be promptly identified through maintenance checks, eliminating potential hazards. It makes the vehicle run more smoothly, reduces engine wear, and extends the vehicle's lifespan. Daily vehicle maintenance: Apart from scheduled mileage-based maintenance at 4S shops, cars also require maintenance during daily use. Daily maintenance mainly includes the following five items: clean the car body, windows, and light glass to remove dust and sand spots, preventing paint corrosion; check if the tire tread is deep enough, if the tire pressure is normal, and if the screws are tight; inspect the sealing condition of the engine intake pipe and if there are any issues with the filter; check if the battery electrolyte is sufficient, if the terminal connections are tight, and if the ventilation holes are blocked; examine if there are any faults in the dashboard, wipers, or lighting system."
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.