Is the Mercedes-Benz C260 domestically produced or imported?

1 Answers
VonCamilla
07/30/25 5:49am
The four-door sedan version of the Mercedes-Benz C260 is domestically produced, while the coupe or wagon versions are imported. The Mercedes-Benz C260 is a B-class sedan under the Mercedes-Benz brand. Taking the 2021 C260 Star Edition as an example, its body dimensions are 4704mm in length, 1810mm in width, and 1454mm in height, with a wheelbase of 2840mm. In terms of power, the 2021 C260 Star Edition is equipped with a 1.5T turbocharged engine combined with a 48V mild hybrid system, delivering a maximum power of 135 kW and a maximum torque of 280 Nm. For the chassis system, the 2021 C260 Star Edition adopts a combination of front multi-link independent suspension and rear multi-link independent suspension, with a rear-wheel drive configuration.
Was this review help?
4
1
Share
More Forum Discussions

What are the specifications and models of the Tiguan tires?

Tiguan tires come in two specifications: 235/55R18 and 235/50R19. In 235/55R18, the first number 235 represents the tire width of 235MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. In 235/50R19, the first number 235 represents the tire width of 235MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 19 represents the rim diameter of 19 inches. The letter "R" in the middle stands for radial tire. The Tiguan uses tires from brands such as Michelin, Hankook, and Dunlop, featuring a five-spoke radial black and silver dual-tone wheel design, with the spare tire being non-full size. If you want to replace the tires yourself, you can follow the steps below: Retrieve the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not completely loosen them, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires also have the following common data marked on them: Tire cord material: indicated by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire, facilitating practical use, such as "Standard rim 5.01F".
10
4
Share

Why is ETC not recognized?

ETC may not be recognized due to reasons such as excessive vehicle speed causing unsuccessful information reading, metal film on the windshield affecting signal transmission, improperly inserted card, incorrect installation position, OBU device malfunction, dead battery, or abnormal card status. ETC is an Electronic Toll Collection system that uses automatic vehicle identification technology to establish wireless data communication between the vehicle and the toll station, enabling automatic vehicle sensing and exchange of relevant toll data. ETC employs computer networks to process toll data, achieving a fully automatic electronic toll collection system without the need for stopping or toll booths.
7
1
Share

What suspension does the Ford Mustang use?

Ford Mustang uses MacPherson independent suspension in the front and multi-link independent suspension in the rear, which is a common suspension combination. MacPherson suspension is widely used due to its simple structure, compact size, and low cost. It features only one L-shaped control arm and does not occupy engine compartment space. With independent suspension, there is no connection between the two wheels on the same axle, so there is no interference between them. In 1962, Ford developed the first concept car of the Mustang, the Mustang I, which was a mid-engine two-seater sports car.
15
5
Share

Does the Camry belong to GAC Toyota?

Camry belongs to GAC Toyota, which is a mid-size car launched by GAC Toyota. GAC Toyota Motor Co., Ltd. is a Sino-Japanese joint venture automobile manufacturing company established in 2004. The Camry comes in two exterior designs: the standard version and the sport version. The standard version appears more conservative, featuring Toyota's Keen Look design philosophy with a wide, distinctive front grille that gives it an overall steady appearance. The sport version looks more aggressive, with a prominent front grille design and an overall front face that exudes a bold and dynamic character.
5
2
Share

What are the Toyota car models being recalled?

Toyota is recalling models including the Alphard, Crown, Highlander, Camry, as well as some Lexus models. An automotive recall is a process where the manufacturer of defective vehicles legally initiates procedures to eliminate product defects. Toyota is one of the world's most renowned automobile manufacturers, offering a wide range of sedans and SUVs. Founded in 1933 by Kiichiro Toyoda, Toyota Motor Corporation is headquartered in Toyota City, Aichi Prefecture, and Bunkyo, Tokyo, Japan. The company operates under the Toyota Group.
10
1
Share

Quickest Solutions for Push-Button Start Failure

Solutions for push-button start failure vary by situation: 1. When the key fob battery is dead: First bring the key as close as possible to the start button (ideally touching it), then press the button. This serves as an emergency workaround, but you should replace the backup key soon. 2. When the steering wheel is locked: Apply force to turn the steering wheel while simultaneously turning the key. 3. When not in Park gear: Whether in Reverse or Drive gear, if ignition succeeds, the vehicle may lurch suddenly during startup. Therefore, most vehicles preset this safety mode - always ensure the gear is in Park position before ignition.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.