Is the Mercedes-Benz C260 China 5 or China 6?

1 Answers
MasonLee
07/29/25 7:07pm
Currently, the Mercedes-Benz C260 on sale includes both China 5 and China 6 models. Below are the relevant introductions about China 5 and China 6 models: China 5 Emission Standard: The carbon monoxide emissions per kilometer driven by the car must not exceed 1000 milligrams; the non-methane hydrocarbon emissions per kilometer driven must not exceed 68 milligrams; the nitrogen oxide emissions per kilometer driven must not exceed 60 milligrams; the PM fine particulate matter emissions per kilometer driven must not exceed 4.5 milligrams. China 6 Emission Standard: The carbon monoxide emissions per kilometer driven by the car are 500 milligrams; the nitrogen oxide emissions per kilometer driven are 35 milligrams; the fine particulate matter emissions per kilometer driven are 3 milligrams; the non-methane hydrocarbon emissions per kilometer driven are 35 milligrams.
Was this review help?
13
4
Share
More Forum Discussions

What is the reason for the fuel tank cap of the Ford Edge not opening?

If the fuel tank cap of the Ford Edge cannot be opened, it is usually due to rust on the hinge of the fuel tank cap or a disconnected pull wire. Below are specific details about the vehicle's speed limit: 1. Body dimensions: The full range of models has a body length of 3980 mm, a width of 1722 mm, and a height of 1470 mm. The vehicle is a five-door, five-seat hatchback with a fuel tank capacity of 42 liters and a trunk capacity of 270 liters. The curb weight of the vehicle is 1155 kg, and the model belongs to the compact car series. 2. Manufacturer: The Ford Edge is produced by Changan Ford, a company established on April 25, 2001, as a joint venture between China Changan Automobile Co., Ltd. and Ford Motor Company of the United States. The lineup includes models such as the Ford Edge, Ford Escape, Ford Kuga, Ford EcoSport, Ford Mondeo, Ford Focus, and Ford Taurus.
7
1
Share

What to Do When the Engine Overheats?

Here are some solutions for engine overheating: 1. Park in a shady area: Idle the car without turning off the engine, open the hood, turn on the heater to dissipate heat as quickly as possible. If possible, park the car in a cool place. 2. Check for leaks in the pipes: Inspect the radiator connecting pipes for any leaks, then check if the coolant is sufficient. If there is no available coolant in the car, you can use mineral water as a temporary substitute, but remember to replace it with new coolant afterward. 3. Do not add coolant immediately: As physics teaches us, heat causes expansion and cold causes contraction. Boiling water in a sealed container generates pressure. If you open the radiator cap immediately after the water boils, the internal pressure may cause the boiling water to spray out, potentially causing burns. 4. Seek professional help: For engine overheating, the most an average person can do is check and add coolant. If the overheating is caused by other faults, it's best to seek help from professionals.
20
2
Share

What are the reasons for the Geely Vision's failure to start?

Introduction to the reasons why the Geely Vision cannot start is as follows: 1. Battery depletion: The starter begins to turn but the speed is insufficient, i.e., lacking power, and later the starter only clicks without turning. Low temperatures in winter and forgetting to turn off certain electrical devices can cause the vehicle to fail to start, especially when used for long periods of short-distance, low-speed driving in winter, the battery voltage may drop below the rated value, making it impossible to start or operate normally. 2. Fuel flow obstruction: There is no oil pressure in the engine fuel supply pipe. This situation often occurs on particularly cold mornings, caused by long-term dirt accumulation in the fuel pipeline. When the temperature is extremely low, water mixed with debris can block the fuel pipeline, resulting in failure to start. 3. Poor ignition system performance: On particularly cold days, due to low intake air temperature, fuel atomization in the cylinder is poor. If combined with insufficient ignition energy, the result is cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the engine from starting.
16
1
Share

What Causes the Sudden Heavy Feeling in the Accelerator Pedal of a New Car?

New car accelerator suddenly feeling heavy may be due to the following reasons: Power assist component damage: The power assist component is damaged. Transmission obstruction: There is an obstruction or increased friction in the transmission part. Dirty throttle body: The throttle body is dirty, leading to insufficient air intake. Methods to address a heavy accelerator pedal are as follows: Clean the fuel injectors: Clean the throttle body, wash the fuel injectors, and lubricate the accelerator cable. Install an accelerator: Install an electronic throttle accelerator. Precautions when pressing the accelerator pedal are as follows: Press gently and release slowly: Press and release the accelerator pedal gently and smoothly. Close coordination: Releasing the clutch should be closely coordinated with pressing the accelerator, with agile movements. Select the appropriate gear: Keep the engine running at medium speed and larger throttle opening most of the time to save fuel.
4
1
Share

What Causes High Fuel Consumption in the Leiling?

This model's fuel consumption varies depending on the engine displacement and configuration. Many factors influence actual fuel consumption, and each driver's experience differs based on road conditions and time of day. Here are some key factors affecting fuel efficiency: 1. Use of air conditioning 2. Driving conditions - most fuel-efficient at steady speeds and optimal RPM 3. Vehicle weight - lighter vehicles consume less fuel 4. Electrical load - higher electrical usage increases alternator resistance 5. Driving habits - frequent braking reduces fuel efficiency 6. Engine temperature - optimal at around 70°C (too low increases oil viscosity, too high reduces lubrication) 7. Engine oil quality 8. Tire resistance - wider tires and underinflation increase resistance 9. Vehicle aerodynamics 10. Vehicle age Actual comprehensive fuel consumption depends on multiple factors including load, road conditions, driving habits, weather, wind speed, and tire pressure. Your actual driving conditions will determine the true fuel consumption.
4
5
Share

What to Do When You Hit a Nearby Car While Opening the Door?

If you hit another car's door while opening your own, you will be fully responsible for the incident. If only the paint is scratched, you can negotiate a settlement with the other party or file an insurance claim. However, note that if you file more than two claims within a year, your insurance premium may increase the following year. Below are methods to prevent hitting a nearby car when opening the door: 1. Avoid illegal parking: Do not park in restricted areas, and only open the door after the vehicle is fully parked. Otherwise, you will be fully responsible for any damage caused to people or other vehicles. 2. Check the mirrors: Before exiting, the driver should check the rearview mirrors to ensure no pedestrians or vehicles are passing before opening the door. If there are obstacles or the space is too narrow, avoid opening the door. 3. Dutch Reach method: When opening the door, first open it slightly by using the hand farthest from the door to push it gently while holding the door with the other hand. This technique, known as the "Dutch Reach," helps prevent the door from opening too wide. Check the surroundings again before stepping out. 4. Close the door immediately: After exiting, close and lock the door to prevent accidental opening due to sudden incidents.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.