Is the Mercedes-Benz 1.5T a Four-Cylinder or Three-Cylinder?

What are the dimensions of the Baojun 730 in terms of length, width, and height?

The length, width, and height dimensions of the Baojun 730 are 4780mm/1780mm/1740mm, which are official data. The length of the Baojun 730 refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetrical plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetrical plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Baojun 730 has a maximum power of 108kw and a maximum torque of 250 Nm. The maximum power speed of this engine is 5200 rpm, and the maximum torque speed ranges from 2200 to 3400 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. This engine is paired with a manual transmission (MT). The country has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

20

2

Share

What is the car with five bars called?

The five-bar logo belongs to WM Motor. Here is more information about WM Motor: 1. The NEDC range of the WM Maven will reach 800km. 2. The new car features simple and light line design, relaxing the user's visual experience. By reducing the number of screens and using transparent screens, the presence of screens is minimized, making the visual experience more refreshing. 3. This concept model is a four-door version, with a full-width LED light strip on the front face, extending the visual width of the car. The drag coefficient is only 0.23cd. 4. The WM Maven is equipped with 5G technology, featuring high speed and low latency, along with functions like HD in-car entertainment, high-precision maps, and V2X networks, enabling L3 conditional autonomous driving and L4 conditional automatic parking. 5. The new car is equipped with WM's third-generation three-electric system and a new characteristic battery pack, offering high efficiency and low power consumption, with energy consumption controlled within 14kWh per 100 kilometers.

11

1

Share

Is the Imported Mercedes-Benz C a Station Wagon?

Imported Mercedes-Benz C not only includes station wagons but also two-door coupes. The domestic version of the Mercedes-Benz C is only available as a four-door sedan, and the domestic version features a long-wheelbase model. Here is some relevant information about the Mercedes-Benz C: 1. The Mercedes-Benz C is a mid-sized car under the Mercedes-Benz brand, competing with models like the BMW 3 Series and Audi A4. The imported Mercedes-Benz C is equipped with three types of engines: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. 2. The low-power 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power at 5,700 rpm and its maximum torque between 1,500 and 4,000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.

14

0

Share

How to reset the maintenance reminder on the Tiguan L?

The specific steps to reset the maintenance reminder on the Tiguan L are as follows: 1. With the engine off, press and hold the short-distance trip counter reset button located below the tachometer. 2. Turn the ignition switch to the ON position, then release the short-distance trip counter reset button. The display will show the "SERVICE" indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition switch to the ON position again, and the "SERVICE" indicator will disappear. The "SERVICE" indicator on the instrument panel is a maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" indicator will flash. If the indicator disappears after starting the engine, it means the vehicle requires maintenance. After maintenance, the maintenance light should be reset.

12

5

Share

Where is the car with the license plate 'Min 0' from?

Min O is the license plate of the Fujian Provincial Public Security Department. Here is its introduction: 1. The first character of the license plate is a Chinese character: representing the abbreviation of the province where the vehicle is registered. For example, Beijing is 'Jing', Tianjin is 'Jin', Shanghai is 'Hu', and Chongqing is 'Yu'. 2. The second character is an English letter: representing the code of the prefecture-level city where the vehicle is located. Generally, it is divided by the provincial vehicle management office based on the conditions of each prefecture-level city. Usually, 'A' is the provincial capital, 'B' is the second-largest city. Each province is different, based on factors such as comprehensive administrative area, total population, and economic strength. The subsequent letters are not in any particular order. 3. If the second character is 'O', it indicates the vehicle belongs to the provincial public security department. For example, 'Shaan-O1313 Police' should be a vehicle of the Shaanxi Provincial Public Security Department; 'Min O' is the vehicle of the Fujian Provincial Public Security Department.

20

5

Share

How to Check the Vacuum Booster on a Vehicle?

To check the vacuum booster on a vehicle, follow these steps: 1. Turn off the engine and press the brake pedal several times with force to eliminate the vacuum inside the vacuum booster. 2. Press the brake pedal with moderate force and keep it in the braking position, then start the engine. 3. If you feel the brake pedal position slightly drop, it indicates the vacuum booster is functioning properly. Otherwise, check the vacuum lines or the vacuum booster itself. If the vacuum booster is damaged, it should be replaced. Below are functional tests for the vacuum booster: (1) Pedal Travel Test: Compare the pedal height with and without vacuum pressure. If the travel is greater with vacuum and smaller without, the booster is effective. If there is no change, the booster is not functioning. (2) Air Leak Test: Disconnect the booster's intake hose and bring lightweight fibers like cotton thread or fluff near the intake port. Observe if the fibers are drawn in. If not, the booster is working correctly. If they are drawn in, the air valve in the control device is leaking and should be replaced. (3) Power Piston Travel Test: The power piston's travel consists of full travel and working travel, varying by booster design. If the working travel is too small, it indicates poor function, air leakage in the power cylinder's large diaphragm, or insufficient vacuum pressure. If the working travel is too large, it suggests oil leakage in the hydraulic circuit or excessive brake shoe clearance.

13

0

Share

Is the Mercedes-Benz 1.5T a Four-Cylinder or Three-Cylinder?

What are the dimensions of the Baojun 730 in terms of length, width, and height?

What is the car with five bars called?

Is the Imported Mercedes-Benz C a Station Wagon?

How to reset the maintenance reminder on the Tiguan L?

Where is the car with the license plate 'Min 0' from?

How to Check the Vacuum Booster on a Vehicle?

Which car brand has a logo with five vertical lines?

What does a dual-clutch car mean?

What are the symptoms of a damaged outer CV joint?

Where is the tire pressure reset button for the Besturn X80?