Is the Mazda6 Atenza's rattling issue really that severe?

What are the conditions for BYD's lifetime warranty on the three electric systems?

Here is the relevant introduction about the conditions for BYD's lifetime warranty on the three electric systems: 1. Exemption clauses of BYD's lifetime warranty: It involves accident repairs not performed at BYD authorized service centers and human or accidental occurrences. That is to say, if the vehicle is involved in an accident, as long as the repairs are done at a BYD authorized service center and the accident does not cause damage to the components related to the three electric systems, the lifetime warranty can still be enjoyed. 2. The battery warranty policy is the first individual owner (non-commercial use) lifetime warranty on the three electric systems: The vehicle's warranty policy is a 6-year or 150,000-kilometer warranty. For the three electric systems, BYD provides a lifetime warranty for the Han model, which is very rare among all new energy vehicle companies and also shows BYD's confidence in its three electric system products.

7

2

Share

Which way to loosen the spare tire bolt?

For passenger cars, it's left to loosen and right to tighten. For large trucks, it's left to tighten and right to loosen for the left-side tires, and right to tighten and left to loosen for the right-side tires. When changing tires, pay attention to the operation sequence. When tightening the bolts, do not tighten them in clockwise or counterclockwise order one by one, but rather tighten them in a diagonal sequence. Types of spare tires: 1. Full-size spare tire: The specifications of a full-size spare tire are exactly the same as the other four tires on the vehicle, and it can replace any temporarily or permanently unusable tire. 2. Non-full-size spare tire: The diameter and width of this type of spare tire are slightly smaller than the other four tires, so it can only be used as a temporary replacement. Moreover, it can only be used on non-driving wheels, and the maximum speed should not exceed 80km/h. 3. Run-flat tire: Also known as a safety tire (run-flat-tire), commonly referred to as a 'bulletproof tire,' the industry directly translates it as 'tire that can run when flat.'

1

0

Share

What is the difference between inside and outside of a tire?

The differences between the inside and outside of a tire are as follows: 1. Different installation directions: The letters 'outside' on different tires indicate that this side of the tire should face outward, while 'inside' indicates that this side should face inward. 2. For asymmetric tread patterns, the side with the 'outside' lettering must be installed facing outward. Here are methods to distinguish the inner and outer directions of car tires: 1. Symmetrical tread patterns: These patterns do not have inner or outer sides, but usually, red and yellow dots are marked on the outer side of the tire. Align the yellow dot with the valve stem. 2. Directional tread patterns: These patterns have clear directional arrows on the tire sidewall. Align the arrow direction with the tire's rotation direction after installation. 3. Asymmetric tread patterns: These tires have 'inside' or 'outside' markings or words on the inner or outer sidewall. Simply match them accordingly.

19

2

Share

What does optional license plate prefix mean?

Optional license plate prefix means that motor vehicle owners can choose their own license plate numbers. There are two ways to self-select license plate numbers: one is online selection, and the other is selection at the vehicle management office. Online selection is further divided into random selection and self-composed selection. For online selection, only combinations of numbers plus letters plus numbers are available. Owners can choose random selection or self-composed selection. The number segments available for self-composed selection are those that have been released for more than 7 days. Each self-composed attempt can include up to five numbers, with a total of 20 attempts allowed. Once a self-composed license plate number is selected, it cannot be changed. It is important to note that after selecting a number online, the owner must complete the registration process at the local vehicle management office within three days. If this period is exceeded, the selected number will automatically become invalid. After purchasing a car, the owner must register the license plate within 15-30 days, with a maximum of 30 days allowed. In special cases where the car is not registered within 30 days, the owner must obtain a temporary license plate from the vehicle management office, and temporary license plates can be applied for a maximum of three times.

19

5

Share

What does c1e mean?

The C1E driver's license is a combined license for motor vehicles and motorcycles, which adds the permissible driving models of a motorcycle license to the existing motor vehicle license. Those who have held a C1 driver's license for more than one year and have not accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before application can apply for an additional E license. Classification of driver's licenses: Motor vehicle driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P. C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The permissible driving scope of a C1 license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people.

6

2

Share

What is the reason for the loss of pressure in the left rear tire?

The reason for the loss of pressure in the left rear tire indicates that the tire pressure of the left rear tire is abnormal and requires calibration. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure generally has the following three reasons: Abnormal tire pressure: Generally, an alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tire, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the original data, and the tire pressure monitoring indicator will light up. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to illuminate. For sensor damage issues, only a new replacement part can be installed.

10

2

Share

Is the Mazda6 Atenza's rattling issue really that severe?

What are the conditions for BYD's lifetime warranty on the three electric systems?

Which way to loosen the spare tire bolt?

What is the difference between inside and outside of a tire?

What does optional license plate prefix mean?

What does c1e mean?

What is the reason for the loss of pressure in the left rear tire?

What is the engine of the Kuangshi car?

Which vehicle management office in Zhoukou handles driver's license renewal?

Where is the cabin air filter located in the Nissan Sylphy?

Can Motorcycles Purchase Theft Insurance?