Is the Maxus G50 a domestic car?

What are the reasons for the sudden failure to start the Focus?

Reasons for the sudden failure to start the Focus: 1. It may be caused by excessive carbon deposits on the idle speed motor, intake tract, intake valve, and combustion chamber; 2. Due to excessive carbon deposits or dirt in the intake tract, or leakage issues with the fuel injector, resulting in an overly lean air-fuel mixture during startup; 3. Failure of the carbon canister or carbon canister solenoid valve. The Focus is a car launched by Changan Ford, with dimensions of 4404mm in length, 1810mm in width, and 1454mm in height, and a wheelbase of 2705mm. In terms of active safety, this car is equipped with features such as body stability control, tire pressure monitoring system, run-flat tires, seatbelt reminder, lane change assist, lane departure warning system, road traffic sign recognition, and fatigue driving alert.

15

5

Share

What does the ABS system mean?

ABS system refers to the Anti-lock Braking System, which consists of an ABS pump, wheel speed sensors, and a brake switch. Its working principle is: during emergency braking, relying on highly sensitive wheel speed sensors installed on each wheel, it detects wheel lock-up, and the computer immediately controls the pressure regulator to release pressure from the wheel's brake caliper, preventing wheel lock-up. The functions of the ABS system are: 1. To prevent vehicle loss of control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure that the driver can control the direction during braking and prevent rear axle skidding.

9

3

Share

Does Car Film Continuously Release Formaldehyde?

Car film does not continuously release formaldehyde; it typically dissipates within about half a month. Classification of car films: 1. Composite process film: Its main function is to block intense sunlight. This is an earlier type of car film, which basically lacks heat insulation capabilities. It was initially called sun paper or tea paper. 2. Dyed film: Most dyed car films on the market use deep-dyeing techniques, incorporating heat-absorbing agents through deep-dyeing methods to absorb infrared rays from sunlight for heat insulation. However, since it also absorbs visible light, the visible light transmittance is insufficient, and due to inherent process limitations, the clarity is relatively poor. 3. Vacuum thermal evaporation film: This type employs vacuum thermal evaporation technology, where an aluminum layer is evaporated onto the substrate to achieve heat insulation effects.

12

0

Share

How Many Liters of Fuel Does a 245-Horsepower Engine Consume at Idle for One Hour?

245-Horsepower Engine Consumes Approximately 3 to 5 Liters of Fuel per Hour at Idle. Below are the relevant details: 1. Introduction to Idle: Idle is an operational state of a vehicle where the engine runs without engaging any gear. The engine speed during idle is referred to as the idle speed. Idle speed can be adjusted by modifying the throttle opening size, among other methods. Idle essentially means the engine is 'producing power without doing work.' 2. Definition of Idle: Idle refers to the engine running without any load, only overcoming the internal friction resistance of its components, without delivering any external power. The minimum speed required to maintain stable engine operation is called idle speed, which is one of the five fundamental operating conditions of an engine. A well-functioning engine typically has an idle speed ranging from 550 to 800 RPM.

19

1

Share

What is gtradial tire?

gtradial is a tire brand under Giti Tire. It belongs to Giti Project Investment Co., Ltd., headquartered in Hefei, established in 1993. Through investments in new factories and acquisitions of related companies, it has been the largest domestic sales volume and most comprehensive product series tire manufacturer in China for seven consecutive years. Giti Tire, founded in Singapore, entered China in 1993 and has sales subsidiaries or offices in the United States, Canada, Germany, the United Kingdom, France, Indonesia, and Brazil. It is one of the world's leading tire manufacturers. Giti provides a complete range of high-quality tires to meet the needs of various vehicles, including sedans, SUVs, off-road vehicles, racing cars, light trucks, light buses, trucks, buses, construction machinery, and agricultural machinery. Functions of tires: bear the full vehicle weight; transmit traction, braking force, driving torque, and braking torque; cushion and absorb shocks and vibrations caused by uneven road surfaces; improve the adhesion performance between the wheels and the ground; prevent severe vibrations and damage to vehicle components; adapt to the high-speed performance of vehicles and reduce driving noise; ensure driving safety, handling stability, comfort, and energy efficiency. Giti Tire maintenance methods: Enhance awareness of tire safety and check tires regularly. Regularly correct wheel balance. Unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Regularly rotate tires. To maintain even wear on all tires of the same vehicle, perform tire rotation every 5,000 kilometers. In daily use of Giti tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-skid functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts during high-speed driving. Additionally, immediately remove pebbles from the grooves. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, do not turn the steering wheel, as this will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and air pressure increases. In such cases, stop to allow the tires to cool down naturally. Do not release air to reduce pressure or splash water to cool the tires, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear caused by dragging between the tires and the ground.

9

4

Share

Why does the hazard lights flash automatically after locking the car?

It may be due to a damaged hazard light switch or an internal malfunction. You can go to a repair shop for a computer diagnosis. Here are the relevant explanations: 1. Turn signal not working: If the car alarm does not make the original turn signal flash when locking or unlocking the door, possible reasons include: the turn signal control signal wire of the installed alarm system is not properly connected; the fuse in the turn signal control wire of the installed alarm system is blown; or the installed alarm system has no output signal for controlling the turn signal. 2. Indicator light not flashing: Regarding the indicator light not flashing, possible reasons include: the installed alarm system does not detect the lock or unlock signal from the original car motor action; the ACC signal input in the installed alarm system is faulty; or the installed alarm system has failed.

20

2

Share

Is the Maxus G50 a domestic car?

What are the reasons for the sudden failure to start the Focus?

What does the ABS system mean?

Does Car Film Continuously Release Formaldehyde?

How Many Liters of Fuel Does a 245-Horsepower Engine Consume at Idle for One Hour?

What is gtradial tire?

Why does the hazard lights flash automatically after locking the car?

What are the reasons for car lights not working?

Does a 24V car fan consume a lot of power?

What are the effects of excessive or insufficient ignition advance angle on the engine?

What are the causes of abnormal noise in the drive shaft?