Is the Maxus diesel engine imported or joint-venture?

2 Answers
DeAnthony
07/30/25 12:48am
The Maxus diesel engine is domestically produced, not imported. Engine structure: The engine's valve drive mechanism adopts a hydraulic support ball rocker arm structure. Compared with the hydraulic tappet valve drive mechanism commonly used in current gasoline engines, this novel valve drive mechanism has the advantage of relatively small friction torque, thus requiring less driving force, which can effectively reduce engine power consumption and fuel consumption. Adopting advanced processing technology: The use of advanced processing technology for fracture-split connecting rods, where the big end hole of the processed connecting rod is split using fracture-split equipment instead of the traditional sawing and grinding process. This utilizes the jagged "half" surface of the fracture-split connecting rod to ensure absolutely accurate tight positioning, thereby reducing friction and extending the service life of the connecting rod.
Was this review help?
3
1
Share
StJosie
08/15/25 6:07am
From a technical perspective, SAIC Maxus diesel engines are primarily produced through Sino-foreign joint ventures rather than being purely imported. This stems from SAIC Group's collaborations, where they co-develop technologies with international partners like General Motors. For instance, while the diesel powertrain systems are based on overseas technology, all assembly and manufacturing occur in domestic factories, with production sites located in places like Jiangsu or Ningbo. This approach maintains international standards while saving on import tariffs and transportation costs. Drivers who've used these vehicles can attest to their quick engine response, low noise levels, and full adaptation to Chinese road conditions. Although core components like ECU control units might occasionally use imported parts, the overall production falls under the joint venture category. For vehicle owners, this means easier maintenance, readily available spare parts, and excellent cost-performance ratio—particularly in the commercial vehicle sector, where this model proves highly reliable.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How to deal with Macan engine control device failure?

Engine control system failure refers to the damage of the vehicle's onboard computer. Solution: Park the vehicle in a safe location, place a safety warning sign at the rear, and then inspect the vehicle's engine system to identify the source of the fault. After determining the cause, carry out targeted repairs. Once the repairs are completed, restart the vehicle. The fault light will disappear, and the vehicle can be used normally. Below is relevant information: Description of the onboard computer: The onboard computer is a very important component of a motor vehicle. The normal operation of the motor vehicle depends on the functioning of the onboard computer. Once the onboard computer is damaged, related functions of the vehicle will be unavailable, affecting the normal operation of the motor vehicle. Meaning of the engine control system fault light: If the engine control system fault light appears during normal vehicle use, it indicates that there is an issue with the vehicle's engine system.
2
5
Share

When Will All Highways Be Free of Charge?

The policy of free highway access is implemented during four major holidays each year: Spring Festival, Qingming Festival, Labor Day, and National Day. Below are the detailed arrangements for free highway access for vehicles: Spring Festival: Starts at 00:00 on New Year's Eve and ends at 24:00 on the sixth day of the lunar new year. Qingming Festival: Starts at 00:00 on April 2nd and ends at 24:00 on April 4th. Labor Day: Starts at 00:00 on April 30th and ends at 24:00 on May 2nd. National Day: Starts at 00:00 on October 1st and ends at 24:00 on October 7th. Applicable vehicles: Free access applies to small passenger vehicles with seven seats or fewer.
2
2
Share

How to Observe the Rear Position When Reversing?

When reversing, you can only judge the position of the rear of the car through the left and right side mirrors. The following is a detailed introduction about car reversing: Common methods: By using the left and right side mirrors, judge the position of the rear of the car and the distance between the rear of the car and obstacles on both sides. Special methods: When reversing into a parking space, pay attention to the position of the two rear wheels relative to the two lines of the parking space. Only when the two rear wheels are adjusted to the appropriate position can the car smoothly reverse into the parking space. When reversing into a garage, pay attention to the distance between the two rear wheels and the walls on both sides of the garage. Other methods: For cars equipped with reversing cameras and parking sensors, you can judge the distance between the rear of the car and obstacles based on the reversing camera and parking sensors.
14
1
Share

Where is the Peugeot 307's air conditioning filter located?

The Peugeot 307's air conditioning filter is located in the upper left corner of the engine compartment. The functions of the air conditioning filter are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2013 Peugeot 307 as an example, it is a compact car with body dimensions of: length 4249mm, width 1786mm, height 1556mm, wheelbase of 2608mm, minimum ground clearance of 117mm, and a body weight of 1280kg. The 2013 Peugeot 307 is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 117PS, maximum torque of 150Nm, maximum power of 86kW, and is paired with a 5-speed manual transmission.
7
3
Share

How to Turn on the Heater in Nissan Sylphy?

Here are the steps to turn on the heater in Nissan Sylphy: 1. After starting the Dongfeng Nissan Sylphy, wait for about 5-6 minutes until the water temperature reaches the normal level, then you can turn on the heater. 2. Adjust the air conditioning circulation mode to internal circulation. 3. Switch to the heater mode, which is indicated by the red zone. 4. When using the heater, there is no need to press the air conditioning button. Pressing the air conditioning button activates the compressor, which means turning on the cold air, but the heater is not required as it transfers part of the heat initially dissipated by the radiator to the cabin. Therefore, turning on the cold air consumes some engine power, while the heater does not affect the power at all. 5. Adjust the air conditioning to a suitable level and set the direction of the air vents.
8
3
Share

How to Deal with Scratches from Tree Branches on a Car?

After a car is scratched by tree branches, you can purchase scratch wax to remove the marks. Specific details about car maintenance are as follows: Protecting the Paint: As temperatures rise in summer and the car is frequently exposed to sunlight, the paint surface can deteriorate significantly. It's essential to protect the car's paint by regularly washing and waxing it. Preventing Evaporation: With higher temperatures in summer, the evaporation of oil and water increases. Therefore, ensure the fuel tank cap is tightly closed and check for oil leaks in the fuel lines. Regularly inspect the water level in the radiator, the oil level in the crankcase, the brake fluid level in the master cylinder, and the electrolyte density and level in the battery. Add or adjust as necessary if levels do not meet specifications.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.