Is the maintenance service provided by 4S stores nationwide?

1 Answers
PatrickLynn
07/29/25 11:51pm
4S stores generally provide nationwide maintenance services, but there are exceptions. The specific analysis and maintenance items are as follows: Specific analysis: If the maintenance service provided by the 4S store is the first free maintenance listed in the maintenance manual, it can be used nationwide. As long as you bring the vehicle's invoice and maintenance manual, you can go to any 4S store of the same brand nationwide for maintenance. However, if it is a sales promotion by the 4S store, it cannot be used nationwide and must be used at the 4S store where the car was purchased. Maintenance items provided by 4S stores: Generally include conventional engine oil and oil filter, as well as items like oil pan plug (gasket), air filter, gasoline filter, air conditioning filter, spark plugs, etc. More formal 4S stores will provide a detailed form when the owner buys the car, and the owner can choose to go for regular maintenance.
Was this review help?
3
2
Share
More Forum Discussions

What is the function of an automotive air conditioning expansion valve?

The primary functions of an automotive air conditioning expansion valve are throttling and controlling the flow of refrigerant. Below are the relevant details about automotive air conditioning expansion valves: 1. Function of a thermal expansion valve: The thermal expansion valve is installed at the inlet of the evaporator and is commonly referred to as the expansion valve. It has two main functions: (1) Throttling effect: High-temperature, high-pressure liquid refrigerant passes through the throttling orifice of the expansion valve, becoming low-temperature, low-pressure mist-like hydraulic refrigerant, creating conditions for refrigerant evaporation. (2) Controlling refrigerant flow: The expansion valve regulates the refrigerant flow to ensure the evaporator outlet contains only gaseous refrigerant. If the flow is too high, the outlet may contain liquid refrigerant, leading to liquid slugging in the compressor. If the refrigerant flow is too low, it may evaporate prematurely, resulting in insufficient cooling. 2. Types of thermal expansion valves: Thermal expansion valves are categorized into internally balanced and externally balanced types based on their balancing methods. Externally balanced thermal expansion valves are further divided into F-type and H-type structural configurations.
17
5
Share

Where is the coolant filler port located on the Range Rover Evoque?

The coolant filler port for the Range Rover Evoque is located under the hood, in the upper right corner of the engine. Below is some relevant information about the Range Rover Evoque: 1. Land Rover: Land Rover is world-renowned for its four-wheel-drive vehicles. Since its inception, the company has been committed to continuously improving the four-wheel-drive experience for its drivers. In the field of four-wheel-drive vehicles, Land Rover not only possesses advanced core technologies but also demonstrates a passion for four-wheel-drive vehicles. Despite continuous product improvements, Land Rover always adheres to its fine tradition of perfectly combining company values with lean design. 2. Range Rover Evoque: It is equipped with a turbocharged 2.0TSi4 engine featuring direct injection technology, delivering a maximum power output of 240 horsepower, paired with an AWF-21 six-speed automatic transmission. Additionally, the vehicle comes with MagneRide adaptive dynamic suspension and full-time four-wheel drive, while the Terrain Response system ensures its top-notch off-road performance.
12
0
Share

What Causes the Land Rover Engine Oil Level Display to Be Unavailable?

Land Rover engine oil level display being unavailable is generally because the engine oil temperature has not reached the warm-up temperature, so the engine oil level sensor may display inaccurate readings. Below is an introduction about Land Rover: 1. Introduction: Land Rover is a British all-terrain vehicle and sport utility vehicle brand, owned by Jaguar Land Rover, currently offering the Range Rover series, Discovery series, and Defender series. 2. Development: Land Rover was introduced in 1948 as a pioneer in civilian all-terrain special vehicles and was the first car globally to successfully traverse the notoriously challenging jungles and wilderness of Central America. Initially, Land Rover was named after a single model by the Rover Car Company, gradually evolving into a brand. 3. Goals: On February 15, 2021, at the Jaguar Land Rover global launch event, Thierry Bolloré, the global CEO of Jaguar Land Rover, announced that the Land Rover brand would launch six pure electric vehicle models in the next five years. Starting from 2026, the company plans to gradually phase out diesel models, achieve zero tailpipe emissions by 2036, and reach the goal of net-zero carbon emissions by 2039.
5
1
Share

What is the tire model of the Chery Ant?

175/60R15 is the tire specification of the Chery Ant. The first number 175 represents the tire width of 175MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 15 denotes the rim diameter of 15 inches. The middle letter or symbol has a special meaning: "R" stands for radial tire. The tire brand for the Chery Ant is Goodride, featuring a longitudinal tread pattern design. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely unscrew the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the wheel hub, carefully align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts by hand until all nuts are concealed, at this point the tire replacement is complete. In addition to the model, the tire also carries the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as: standard rim 5.00F.
16
4
Share

Where is the air intake of the Magotan engine located?

The air intake of the Magotan engine is located near the front bumper. Here is some extended information about engine cleaning: 1. You can use a water gun for cleaning: However, the fuse box must not be cleaned and should be wrapped with plastic film. After cleaning, it is necessary to immediately use a high-pressure water gun to blow dry, otherwise, water entering the wire harness connectors may cause vehicle malfunctions. 2. If the engine does not leak oil: If there is only dust and dirt on the surface, cleaning may not be necessary, and it will not harm the engine. 3. If the engine leaks oil: It is best to clean it regularly. A common issue is oil leakage from the valve cover gasket. The leaked oil will adhere to the entire engine, and engine oil tends to attract dust. When dust and dirt mix with the oil and are baked by the engine's high temperature, a thick layer of sludge forms. 4. Sludge is corrosive: If it gets on engine wiring or rubber hoses, it can corrode these components, accelerating the aging of wires and rubber. Therefore, it is best to clean it. It is recommended to clean the engine compartment at a professional shop, as they have specialized cleaning agents for better results. Professionals know which areas can and cannot be cleaned.
16
4
Share

Do You Need to Wait for the Traffic Light to Make a U-Turn?

If the gap is marked with a dashed line, making a U-turn is not affected by the traffic signal and does not require crossing the pedestrian crossing. You can directly make a U-turn without affecting other normally moving vehicles and ensuring your own safety. If the gap is marked with a solid line, then making a U-turn requires crossing the pedestrian crossing and is subject to the traffic signal. When making a U-turn that requires crossing the pedestrian crossing, you must yield to pedestrians: If pedestrians are walking on the right side of the road's crosswalk and have not reached the centerline of the road, vehicles on the left side of the road should slow down and allow them to pass safely. If pedestrians are waiting outside the boundary line of the motorized and non-motorized lanes and have not entered the road, vehicles should slow down and allow them to pass safely. If pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles that do not stop and yield are committing a traffic violation and should be penalized. If pedestrians enter the motorized lane from the crosswalk, vehicles in the adjacent lane should slow down and allow them to pass safely. Failing to stop and yield is a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians cross the centerline of the road and enter the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If the road is divided by a green belt, vehicles must slow down and allow pedestrians waiting in the middle of the road to pass safely. Situations where U-turns are allowed: If there is a U-turn sign at the intersection, you can make a U-turn. If there is a U-turn signal light, follow its instructions. If there is no signal light, make the U-turn based on the specific situation without obstructing other vehicles or pedestrians. If the intersection does not explicitly prohibit U-turns or left turns, you can make a U-turn. "No explicit prohibition" means there are no "No U-turn" or "No Left Turn" signs, and the centerline is not solid. U-turns are also allowed in yellow grid zones. Yellow grid lines indicate no-stopping zones, but U-turns are permitted unless there is a central barrier. If there is a U-turn signal light at the intersection, follow its instructions—only make a U-turn when the light is green. If "No Left Turn" and "U-turn Allowed" signs appear together, U-turns are permitted, but left turns are not. Note that "No U-turn" is not the same as "No Left Turn." Things to note when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. If there is a "No Left Turn" sign, U-turns are also prohibited at that intersection, even if there is no explicit "No U-turn" sign, because U-turns require a left turn first. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, you cannot make a U-turn at that intersection. Always yield to oncoming traffic when making a U-turn. Failing to do so will make you fully liable for any accidents. Near the intersection stop line, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even if there are no explicit "No U-turn" signs.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.