···
Log in / Register

Is the Lynk & Co 06 a new energy vehicle?

4 Answers
DiTeagan
07/29/25 6:31pm
Lynk & Co 06 is a new energy vehicle, specifically a plug-in hybrid electric vehicle (PHEV), which qualifies for green license plates. New energy vehicles are categorized into pure electric vehicles (PEV), plug-in hybrid electric vehicles (PHEV), and fuel cell electric vehicles (FCEV). Pure electric vehicles are powered by electric motors, with energy sourced from battery packs. They are characterized by low noise, rapid power response, and zero pollution. However, the current infrastructure of charging stations is insufficient, limiting their use to short-distance commuting within cities. Hybrid vehicles combine an internal combustion engine with an electric motor, where each system can operate independently. A key feature of hybrid vehicles is their excellent fuel economy, as the electric motor assists during gentle driving and startup, allowing the engine to remain idle. Both plug-in hybrids and conventional hybrids fall under the category of hybrid vehicles. However, plug-in hybrids can recharge their batteries via an external power source and allow manual selection of the power delivery mode. Fuel cell vehicles generate electricity through a chemical reaction between hydrogen and oxygen, converting it into kinetic energy to drive the vehicle without environmental impact. Due to high costs and technological limitations, fuel cell vehicles have not yet achieved widespread adoption.
Was this review help?
5
1
Share
Damian
08/14/25 11:33am
As someone who frequently keeps up with automotive trends, I must say the Lynk & Co 06 isn't a pure new energy vehicle, but it does offer a plug-in hybrid version, which qualifies as a type of new energy vehicle. I've test-driven its PHEV model, which delivers over 50 km of pure electric range—enough for daily commutes without using fuel, making it quite economical. If you live in the city, the new energy license plate also exempts you from driving restrictions, which is very practical. Overall, the Lynk & Co 06 blends fuel and electric technologies seamlessly, offering smooth handling and quick acceleration, making it ideal for those who want eco-friendliness without full reliance on charging stations. With China's current push for new energy policies, the hybrid version of the Lynk & Co 06 has seen strong sales, reflecting growing public acceptance of green mobility.
Was this review help?
3
4
Share
Expand All
VanWalter
10/14/25 6:37am
From an environmental perspective, as someone who prioritizes sustainable development, I believe the Lynk & Co 06 plug-in hybrid is indeed a new energy vehicle. It reduces exhaust emissions and can save over 20% more fuel compared to pure gasoline vehicles, contributing to better air quality. In my actual usage, I've found that with convenient charging, daily driving produces almost zero emissions. However, since it's not a pure electric vehicle, attention needs to be paid to battery recycling and resource consumption issues. I suggest the government increase subsidies for such vehicles to encourage more people to transition to new energy. In the long run, Lynk & Co 06's hybrid technology serves as a bridge to full electrification and is worth promoting.
Was this review help?
6
0
Share
Expand All
ValerieAnn
11/27/25 7:32am
Our family just bought a Lynk & Co 06, opting for the plug-in hybrid version. It's not a pure electric vehicle, but the hybrid model falls under the new energy category. We mostly use electric power for daily driving, saving a lot on fuel costs. The spacious interior is perfect for family trips, and the trunk can easily accommodate a stroller and luggage. Installing the charging station was straightforward—just plug it in at night, and it's fully charged by the next morning. Overall, it offers great value for money with low maintenance costs, making it a great recommendation for budget-conscious family users.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Will the Haval H6 automatically lock when the driver leaves?

Haval H6 will automatically lock after the owner leaves. Here are the specific details about the Haval H6: 1. Vehicle Positioning: The Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. 2. Powertrain: It is equipped with two engines: a 1.5T and a 2.0T. The 1.5T engine has a maximum power of 124kW and a peak torque of 285Nm, while the 2.0T engine delivers a maximum power of 145kW and a peak torque of 355Nm. 3. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily adjusts the valve opening and closing time, valve lift, and duration, ensuring sufficient air intake under various engine conditions, thereby improving engine efficiency.
19
0
Share

What are the tips for novice drivers driving on national highways?

Novice drivers driving on national highways should pay attention to the following tips: The most important thing is to adjust your driving mindset, drive according to regulations, and display a novice driver sign. Additionally, avoid driving behind large trucks for extended periods. Since the road conditions on national highways can be complex, always be prepared to slow down. Novice drivers should note the following when driving on national highways: 1. Drive as close to the center line as possible: When there are no other vehicles, try to drive near the center line, positioning yourself as if you are sitting on the center line. This provides more room to maneuver in case of unexpected situations on either side. 2. Remember to signal when overtaking: When overtaking, remember to use your turn signals and honk the horn in a short-long-short pattern, which sounds more friendly. Also, flash your headlights to alert the driver in front. 3. Slow down when approaching villages: Always reduce speed when passing through villages, as villagers may not be fully aware of traffic rules. 4. Avoid picking up strangers: When driving in unfamiliar areas, try not to give rides to strangers flagging you down.
1
5
Share

What are the reasons for the JMC SVS light being on and diesel engine power loss?

Here are the specific reasons for the JMC SVS light being on and diesel engine power loss: 1. Poor engine combustion state. 2. Engine knocking. 3. Poor quality of vehicle fuel. 4. Dirty engine cylinder interior with accumulated carbon deposits. 5. The electronic control unit cannot obtain engine data. Here is extended information about the JMC SVS light: 1. Function: The car SVS light is similar to the engine fault light. When the SVS indicator is on, it indicates that the engine control unit has detected an error signal from a sensor or that it is beyond the usage standard. When the ignition switch is turned on, the car SVS indicator light will come on for an automatic check and will turn off automatically after a few seconds. 2. Working mode: When the vehicle's ignition key is turned on, the onboard computer will perform a self-check and this light will come on, and it will turn off after the vehicle is started; when the engine ECU detects a fault, the SVS light will come on; if this light comes on while the vehicle is in motion, it indicates that there is a fault with the vehicle's engine.
6
1
Share

What is the correct method for defogging a car?

Methods for defogging a car are as follows: 1. Air conditioning defogging: Turn on the front window defogging mode, set the fan speed to maximum, turn on the A/C switch, and then adjust the temperature to the lowest setting. The fog on the glass will be eliminated shortly. Additionally, some models are equipped with electric heating for the rear windshield and exterior rearview mirrors. Simply click the switch to turn it on, and the fog will be cleared in about a minute. 2. Air convection: Opening the windows can increase air convection, reduce the temperature difference between the inside and outside of the car, and weaken the conditions for fog formation. 3. Defogging spray: When using, simply spray it evenly on the glass surface and then wipe it clean with a dry towel. The principle is to use surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules and causing fog droplets to coalesce into larger droplets, thus not obstructing vision. This can also be used on other car glass surfaces, especially the exterior rearview mirrors. 4. Homemade defogging spray with dish soap: Mix dish soap and water in a 1:6 ratio in a bottle, spray and wipe before traveling. The effect is comparable to commercially available defogging sprays, though the durability is slightly inferior.
5
2
Share

How to Clear the Car Maintenance Reminder?

Clearing the car maintenance reminder can be done as follows: 1. First, turn off the car's ignition, then press and hold the SET button on the right side of the car's dashboard with your left hand. 2. While holding the "SET" button, turn on the ignition. 3. Then release the "SET" button and press it once more. 4. Finally, turn off the ignition and then turn it back on to complete the process of clearing the maintenance reminder. Additional Information: 1. During every routine car maintenance, the oil filter must be replaced. For cars driven in areas that are not particularly dusty, the air filter can generally last for 20,000 kilometers, requiring only cleaning at the 7,500-kilometer mark. The lifespan of the fuel filter depends on the quality of the fuel used. If you consistently refuel at reputable gas stations and do not experience fuel supply issues, you can consider replacing it after more than 20,000 kilometers. 2. Under normal usage conditions, brake pads can last for 30,000 to 40,000 kilometers, and the original battery can last for 3 to 4 years. There are various types of spark plugs: standard nickel alloy spark plugs can last for 20,000 to 30,000 kilometers, platinum spark plugs for 80,000 to 100,000 kilometers, and iridium spark plugs for 30,000 to 40,000 kilometers.
15
0
Share

Why does the engine RPM drop slowly when releasing the throttle?

Reasons for slow RPM drop when releasing the throttle are as follows: 1. This may be caused by an over-rich air-fuel mixture in the engine, which can result from various factors; 2. It might be due to malfunctioning sensors. Proper engine operation relies on numerous sensors and electronic components - if certain sensors fail, it may cause abnormal engine performance. Below is relevant information about engine sensors: 1. Sensors around the engine include oxygen sensors, mass airflow sensors, intake air temperature sensors, camshaft position sensors, coolant temperature sensors, etc. 2. If any sensor malfunctions, it may cause the engine to exhibit an over-rich mixture condition, resulting in minimal RPM reduction when releasing the throttle pedal.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.