Is the Lynk & Co 05 engine from Volvo?

1 Answers
MacEthan
07/29/25 2:10pm
Lynk & Co 05 engine is not from Volvo. Below is some knowledge about engines. Basic parameters of internal combustion engines: One of the most common engine parameters—engine displacement. Engine displacement is the total volume of all the cylinders in an engine, usually measured in liters (L). The cylinder displacement refers to the volume of gas swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. Engine displacement is a very important engine parameter, as it represents the size of the engine more accurately than the cylinder bore and the number of cylinders. Many performance indicators of the engine are closely related to displacement. The larger the displacement, the greater the engine's output power. Engine working principle: The engine valve drive mechanism adopts a hydraulic support roller rocker arm structure. Compared with the hydraulic tappet valve drive mechanism commonly used in gasoline engines today, this novel valve drive mechanism has the advantage of relatively low friction torque, thus requiring less driving force. This effectively reduces engine power consumption and lowers fuel consumption.
Was this review help?
6
3
Share
More Forum Discussions

How to Troubleshoot Audi Steering Wheel Adjustment Malfunction?

Audi steering wheel adjustment malfunction solution is to turn off the ignition switch, disconnect all plugs of the power supply control unit J519, reconnect all plugs after 5 minutes, use VAS5052 to enter the fault navigation menu, select the corresponding model, year, etc., perform vehicle system testing, after the vehicle system test reads the fault memory, proceed to the test plan, then perform basic settings, exit the system, and test drive to eliminate the fault. Control panel: Press confirm on the instrument menu, switch pages left and right, select the button to slide up and down for page turning, and switch the instrument view interface. Steering wheel position adjustment: Pull the lever to activate the adjustment mode, adjust the steering wheel position, the vertical height of the steering wheel is adjusted by lifting or pressing down, forward and backward movement is achieved by pushing forward or pulling backward, lift the pressure lever, adjust the position manually, then press the pressure lever again to fix the steering wheel.
20
5
Share

How much fuel is left when the fuel gauge light comes on in a Haval H6?

The fuel gauge light in a Haval H6 comes on when there are approximately 10 liters of fuel remaining. H6 Features: The most noticeable change in the model is its more pronounced sporty style, with taut body lines and a muscular appearance. The Haval H6 boasts a higher level of refinement compared to the older version, and its interior is also a highlight, exuding a sense of luxury and technological sophistication. H6 Fuel-Saving Tips: Control the optimal engine speed. Generally, for fuel-injected cars, the most fuel-efficient engine speed is around 2200-2500 RPM. Maintain this range regardless of the gear. Too low an RPM will make the car sluggish, consume fuel without moving, and damage the engine; too high an RPM increases unnecessary fuel consumption and also harms the engine. Maintain the best speed. The most fuel-efficient driving condition is steady, straight-line driving. The most fuel-efficient speed for small-displacement cars is 60-80 km/h, while for medium-displacement cars, it's 80-100 km/h. Control the shift RPM. When shifting gears, add a bit more throttle than usual to let the tachometer reach slightly above 2500 RPM. Shifting below 2000 RPM will cause the speed to drop further after shifting, creating a feeling of lag, and requiring more throttle to compensate, which wastes fuel. Avoid lane changes and overtaking. Constantly changing lanes, overtaking, sudden acceleration, and hard braking not only consume more fuel but also increase the risk factor several times over, which is unnecessary and not worth it. Remember to maintain a steady, moderate speed while driving for safety and fuel efficiency.
15
4
Share

Solutions for Frequent Clogging of Emgrand GL Sunroof Drain Holes?

Solutions for frequent clogging of Emgrand GL sunroof drain holes. First, the "enema" method: Using a syringe connected to an infusion tube to flush the drain pipe should effectively clear the blockage. Practical experience has proven this method to be highly effective and simple to perform. Before performing the "enema," use the syringe to extract water from the sunroof drainage channel to prevent water from flowing into the vehicle during the process. Another method is the air pressure method: Go to a tire change location, take an air gun, aim it at the front two drain holes of the sunroof drainage pipe, and use compressed air to blow through the pipe. Be cautious to avoid splashing dirty water due to excessive air pressure. Emgrand Advantages: The advantages include an appealing exterior design that stands out in its price range, a bold front face, distinct lines, a simple yet elegant overall design, a well-rounded rear shape, and attractive taillights. Emgrand Disadvantages: The disadvantage is that the vehicle's noise insulation is not very effective, failing to meet the desired quietness.
10
4
Share

Can the Little Ant new energy vehicle wade through water?

Can the Little Ant new energy vehicle wade through water. Advantages of the Little Ant new energy vehicle: The Little Ant has stable braking, long range, and multiple configurations, making it worth purchasing. The Chery new energy vehicle product, Little Ant, is equipped with safety features such as ASR traction control system, C-ESC electronic stability control system, low-speed pedestrian warning, TPMS tire pressure monitoring system, and automatic window locking. These configurations make the Little Ant a more advanced automotive product. Precautions for using the Little Ant new energy vehicle: Before charging, check the charging gun, charging socket insulator, pins, and socket holes for any foreign objects.
8
2
Share

Does the Haval H6 need throttle matching after cleaning?

Haval h6 throttle cleaning requires matching. Haval h6 throttle cleaning steps: Place a towel under the throttle to prevent the cleaning fluid from splashing. Use electronic throttle cleaner and spray it onto the throttle surface. Wait for 3 minutes to allow the fluid to fully dissolve carbon deposits. Spray and clean the throttle surface and shaft, while wiping away any excess cleaning fluid with a towel. Increase the engine speed and clean the inner chamber of the throttle. Turn off the engine and restore the throttle connecting pipe to its original state. Restart the engine. Haval H6 throttle cleaning interval: If the idle speed is stable and fuel consumption is steady, there is no need to worry even after 20,000 kilometers. If the driving environment is good and there is no idle speed fluctuation, cleaning can be done at 50,000 kilometers, meaning an interval of 20,000 to 50,000 kilometers.
15
5
Share

Solution for ACC Malfunction After Replacing Front Bumper on Audi?

Audi ACC malfunction solution after replacing the front bumper is to try replacing the clock spring. Definition of Audi ACC: Audi ACC refers to the ignition switch status, which stands for Adaptive Cruise Control in Chinese. Audi ACC is an intelligent automatic control system developed based on earlier cruise control technology. It is essentially an "advanced version" of conventional cruise control. This system uses radar (typically integrated in the front vehicle emblem) to detect the distance between the vehicle and the car ahead. When it detects an obstacle or the distance becoming shorter, the ACC module will control the braking system to decelerate until a safe distance is maintained. How to activate Audi ACC: The ACC adaptive cruise control lever is located behind the left side of the steering wheel, where various cruise parameters can be set, including following distance and cruising speed.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.