···
Log in / Register

Is the Lynk & Co 03 an A or B class car?

4 Answers
Elsie
07/29/25 4:08pm

The Lynk & Co 03 is an A-class car. The Lynk & Co 03 is a high-performance vehicle under the Lynk & Co brand. Below is the relevant introduction about car classifications: Introduction to A-class cars: Also known as compact cars, they have a body length between 4.3 meters to 4.79 meters, a wheelbase generally ranging from 2.35 meters to 2.79 meters, and an engine displacement typically between 1.4 liters to 2.0 liters. Because they can meet the diverse needs of ordinary families, they are widely recognized by consumers and have become mainstream in the car market. Generally, cars are classified into A, B, C, and D levels, with standards varying from country to country. Vehicle classification standards: Cars are divided into four categories: A, B, C, and D. This classification is generally based on the car's engine displacement and length. The wheelbase for A00-class cars is 2 meters to 2.3 meters, with an engine displacement of less than 1 liter. The wheelbase for A0-class cars is 2.3 meters to 2.5 meters, with an engine displacement between 1 liter and 1.5 liters. A-class cars have a wheelbase of 2.5 meters to 2.7 meters, with a corresponding engine displacement between 1.5 liters and 2 liters.

Was this review help?
14
2
Share
JocelynRose
08/15/25 4:32am

I've been driving the Lynk & Co 03 for quite a while. It's a standard A-segment car, what we commonly call a compact sedan. With a wheelbase of around 2730mm, it's similar in size to the Volkswagen Golf—not too big, not too small, making daily commuting and parking super convenient. In terms of power, both the 1.5T and 2.0T engines are quite impressive, especially on the highway where it drives smoothly without feeling floaty. There are many benefits to choosing an A-segment car: lower fuel consumption, saving a few hundred bucks on gas each month; refined interior craftsmanship, like the responsive touchscreen infotainment system; and enough space for five passengers without feeling cramped, plus a trunk that's sufficient for luggage. Compared to B-segment cars like the Magotan, it's smaller but more agile, offering a stylish and affordable option for young drivers.

Was this review help?
12
4
Share
Expand All
DelAlina
10/12/25 6:02am

As a family user, I prioritize practicality, and the Lynk & Co 03 is classified as a Class A car. In the Chinese auto market, Class A compact cars typically have a wheelbase ranging from 2600 to 2700 mm, and the 03's 2730 mm fits within this standard. The space is well-designed, with comfortable seating for two children in the rear without legroom issues. It offers good fuel economy, consuming 7-8 liters per 100 km in urban driving, saving money in the long run. Maintenance costs are low, with parts cheaper than those of Class B cars. The chassis tuning ensures stability, making long-distance driving safer, and features like blind-spot monitoring are thoughtful. In summary, its Class A positioning makes it ideal for urban families, offering an affordable price without compromising on quality compared to joint-venture brands.

Was this review help?
1
2
Share
Expand All
Tess
11/25/25 7:05am

From a technical perspective, the Lynk & Co 03 is classified as a compact A-segment car. Built on the CMA platform, it boasts a wheelbase of 2730mm, with dimensions comparable to benchmarks like the Honda Civic. It offers precise handling with light steering and strong explosive power from its turbocharged engine. The safety systems, such as autonomous emergency braking, inherit Volvo's heritage. The advantages of the A-segment lie in its agile handling and straightforward maintenance, making it more hassle-free than B-segment vehicles.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

What is the purpose of polishing?

The following are the functions of automotive polishing: 1. Used to reduce the surface roughness of the car, obtaining a bright and smooth surface. 2. Removes issues affecting the paint appearance such as the oxidation layer on the paint surface, shallow scratches, and loss of gloss caused by oxidation. Below are the methods for polishing different automotive issues: 1. Defect removal: Spray a small amount of water on the paint surface, use P1500 pyramid sandpaper with a dry grinder to sand the entire surface once in all directions (up, down, left, right) until the paint surface becomes matte; after sanding, use a rubber squeegee to scrape off the white foam on the surface, observe the paint surface to identify prominent defects, then spray a small amount of water on the sanding disc to remove the defects. 2. Overly fine paint surface: Use a dry grinder with P3000 pyramid sanding disc and a dry sanding soft pad to finely sand the overly fine paint surface, spray a certain amount of water on the sanding disc and paint surface, and sand the entire paint surface twice in each direction (up, down, left, right) at a faster speed. After sanding, use a rubber squeegee to scrape off the surface water and white foam. Quality standard: The paint surface should be free of defects such as oxidation layers and scratches. 3. Coarse wax polishing: Further removes surface sanding marks after sandpaper grinding, restoring the paint surface's smoothness and initial gloss. Apply wax evenly on a certain area of the paint surface, with the polisher speed controlled between 1200-2000 RPM. Initially, apply medium to high pressure to the polishing pad to polish the paint surface at a uniform speed. Observe the paint surface, and once the sanding marks are significantly removed, reduce the pressure to remove the wax marks, restoring some gloss to the paint surface. After polishing, use a microfiber cloth to clean off any residual coarse wax and dust from the paint surface.
9
3
Share

Driving Test Subject 3 Lighting Mnemonic Table?

Subject 3 lighting test mnemonic: 1. Driving at night without street lights and under poor lighting conditions; (high beam) 2. Meeting non-motor vehicles on narrow roads at night; (low beam) 3. Following vehicles closely in the same direction at night; (low beam) 4. Meeting motor vehicles at night (low beam) 5. Passing over arch bridges and pedestrian crossings at night; (alternate between high and low beams) 6. Passing sharp curves and slopes at night; (alternate between high and low beams) 7. Passing intersections without traffic signals at night; (high and low beams) 8. Vehicle breakdown on the road at night, obstructing traffic and difficult to move. (width lights, hazard warning lights) 9. Driving in foggy weather (fog lights, hazard warning lights) Summary: No lights turn on high beam, following or meeting vehicles use low beam, the word 'passing' means alternate between high and low beams.
4
0
Share

What to Do if There's a Small Cut on the Sidewall of a Tire?

If the sidewall of a tire is scratched, it must be replaced as soon as possible to avoid the risk of a high-speed blowout. If the damage on the contact surface exceeds 4mm, the tire should also be replaced immediately, as both internal and external repairs pose potential dangers. It is not recommended to use the vehicle before the tire is inspected and repaired (especially if the front tire is damaged). It is advisable to remove the tire to check for internal punctures. Considering safety, if this area is punctured, it is not recommended to repair it—replacement is necessary. The following five habits can extend tire life: 1. Develop the habit of checking tire pressure regularly. Air pressure is key to extending tire life—if tire pressure frequently exceeds the normal level by 20%, tire life will decrease by 10%; if it is frequently 30% below normal, tire life will be reduced by 52%. 2. Maintain consistent air pressure. Tire pressure is the life of a tire. If pressure is too low, the tire body deforms more, leading to cracks on the sidewalls and excessive heat generation, which accelerates rubber aging, fatigue of the cord layer, and cord breakage. 3. Regularly remove foreign objects from the tire. While driving, small stones often get lodged in the tread grooves. If not removed promptly, these stones can puncture the tire over time, causing leaks or blowouts. 4. Adopt scientifically sound driving habits. When driving on roads with significant curvature, try to stay centered to avoid and reduce vehicle weight shifts, which can increase uneven tire wear due to uneven load distribution. 5. Maintain accurate wheel alignment. Front-wheel alignment greatly impacts tire lifespan, with toe-in and camber being the primary factors. Excessive camber accelerates shoulder wear (uneven wear), while incorrect toe-in mainly accelerates wear on the inner and outer edges of the tire.
17
1
Share

What causes odors inside an Audi A4?

Audi A4 interior odors may be caused by sound insulation cotton, vibration damping pads, and interior materials. Solutions are as follows: Ventilation method: For the first six months after purchasing a new car or after decoration, develop the habit of moderately opening windows while driving to maintain fresh air circulation inside the vehicle. Chemical product method: Herbal formaldehyde remover, a general term for plant-based solutions, can be sprayed on floor mats and seats to decompose new car odors. Activated charcoal method: Place activated charcoal inside the new car. Higher-quality options include using Ye Guangni material, which can be reused. Vinegar method: When the car is not in use, place a small bucket of water with some vinegar inside the vehicle. The water can absorb formaldehyde while the vinegar helps stabilize it.
7
0
Share

Can I Transfer to a Driving School in Another Location?

Legal Analysis: Yes, the process for transferring your driver's license examination to another location mid-way is as follows: 1. If the applicant has passed Subject 1, Subject 2, or Subject 3 in the original examination location, they can apply to the vehicle management office in their current residence to change the examination location and continue with the remaining subjects. 2. If the applicant has registered but not yet passed Subject 1 in the original examination location, they can re-register for the examination in their current residence. The original registration information system will be automatically canceled, and after re-registering, they can still apply to change the examination location once. 3. After the application is accepted, the applicant should schedule the examination via the internet service platform. The total number of scheduled examinations for Subject 2 and Subject 3 (road driving skills) in both the transfer-in and transfer-out locations cannot exceed five times each. 4. After the applicant passes all subjects, the vehicle management office in the transfer-in location will issue the certificate and archive it. 5. After a successful transfer, the applicant can start practicing and taking exams at a driving school in their current residence. Procedures may vary slightly in different regions, so it's advisable to consult the local vehicle management office for specifics.
5
2
Share

How to Insert a USB Drive in an 11th-gen Passat?

First, open the glove compartment on the passenger side by gently pulling it. Locate the USB port inside the glove compartment and pull it out. Insert the prepared USB drive containing the files you want to play into this USB port.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.