···
Log in / Register

Is the lost driver's license declaration written by oneself?

3 Answers
Erick
08/27/25 7:22am
Is the lost driver's license declaration written by oneself? The following is a partial introduction about the lost driver's license declaration: 1. General content: The lost driver's license declaration needs to state the name, ID number, file number, driver's license chip number, and declare that the loss is true. 2. Notes: The motor vehicle driver's license is a necessity for driving. If the motor vehicle driver's license is lost, it should be reissued in time. During this period, driving is not allowed. The motor vehicle driver should first issue a written declaration of the loss of the motor vehicle driver's license and apply for reissue to the vehicle management office of the place where the motor vehicle driver's license was issued.
Was this review help?
12
5
Share
VonSabrina
09/09/25 6:09am
Don't panic if you lose your driver's license, as getting a replacement is much easier now. I remember last year when my friend lost their license, they just needed to bring their ID card and a photo to the traffic management office. The staff provided a form to fill out, which was the application form for a replacement license, including the lost declaration content—no need to write a separate statement. After paying a small fee for the replacement, they could take a photo on-site or use their own photo, and the new license would be ready in about a week. The whole process was smooth, with no need to write any declaration. Nowadays, many cities offer online services through the Traffic Management 12123 App, making it even more time-efficient. If you're concerned about personal information leakage, you can specifically ask the staff to add a disclaimer note in the declaration.
Was this review help?
20
1
Share
Expand All
LailaRose
10/23/25 7:00am
I used to think I needed to write a statement when I lost my driver's license, but actually, it's completely unnecessary. When you go to the DMV for a replacement, they'll have you fill out a form. This form, which clearly states the circumstances of the lost license, serves as your declaration, and it comes in a standard format. Nowadays, even publishing a loss notice in the newspaper isn't mandatory, and the replacement process has been greatly simplified. A reminder: remember to bring your original ID card and prepare two one-inch white background photos in advance. If you don't have the photos, it's okay—the DMV has self-service photo booths. It's unlikely you'll get your new license the same day, but the process is much more efficient than before. During the replacement period, it's advisable to carry the replacement receipt with you while driving to avoid complications if you're stopped by the police.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Must the first insurance be purchased at the 4S store where the car was bought?

When buying a car for the first time, insurance does not have to be purchased at the 4S store. The details are as follows: 1. According to Article 9 of the Consumer Rights Protection Law: Consumers have the right to independently choose the operators who provide goods or services, independently select the types of goods or service methods, and independently decide whether to purchase any product or accept any service. 2. During the sales process, merchants can suggest handling insurance, but they cannot force consumers to purchase it. 3. When consumers independently choose goods or services, they have the right to compare, evaluate, and select.
15
2
Share

What does the eco light on the car mean?

When the eco indicator light on the vehicle's dashboard is illuminated, it indicates that the car's economy mode has been activated. Eco is an English abbreviation formed from the words Ecology, Conservation, and Optimization. The Eco mode is further divided into active eco driving mode and passive eco driving mode. Eco mode can be categorized into active and passive types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to enable it. When the driver presses the Eco mode switch, the dashboard indicator light turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive Eco mode does not have a dedicated button; when the dashboard Eco indicator light is on, it merely serves as a reminder function. The Eco system automatically evaluates your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars use the active Eco driving mode, which means they have their own switch button. Therefore, we can enable Eco mode during daily driving. Additionally, Eco mode usually becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car will prioritize speed, causing the Eco mode to automatically deactivate. When idling or in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit will prioritize ensuring sufficient power to drive the vehicle, and the Eco mode will not function in this case either.
13
2
Share

Does the Emgrand GL manual transmission have cruise control?

Emgrand GL manual transmission does not have cruise control. Only the automatic transmission models are equipped with it. The relevant introduction to cruise control is as follows: How cruise control works: The cruise control module reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to the servo mechanism to adjust the throttle opening, increasing or decreasing it to maintain the vehicle at the set speed. How to use cruise control: Press CRUISE to activate cruise control. Briefly press the RES+ or SET- adjustment button once to increase or decrease the set cruise speed by 1km/h. Briefly press the SET- button to set the current speed as the cruise speed.
11
2
Share

How to Deal with Sunroof Noise?

Solutions for sunroof noise are as follows: 1. Wipe the sunroof slide rail with a soft cotton cloth. 2. Apply butter to the rail. 3. For rubber or plastic parts, clean the surface and apply talcum powder for protection. 4. Regularly check the sunroof and tighten any loose screws. Here are the reasons for sunroof noise: 1. Aging of the sunroof rubber seal or sealing ring. 2. Loose sunroof screws. 3. Dust particles in the sunroof slide rail. The functions of the sunroof are as follows: 1. Enhance the ventilation inside the car. 2. Refresh the air inside the car. 3. In case of an emergency where the door cannot be used for escape, one can exit through the sunroof.
8
0
Share

How to Install Car License Plate Screws?

Below is the installation tutorial for car license plate screws: 1. After receiving the license plate, you will generally be provided with two packs of professional screws for installation. Insert the screws into the holes, rotating them as you insert. Be careful not to insert them backwards. 2. Take out the car license plate and first position it correctly by hand, ensuring the left and right distances are as equal as possible to maintain symmetry and aesthetic appeal. Make sure the four screw holes on the license plate align with the four holes on the bumper. 3. Use a screwdriver to tighten the screws. Once tightened, gently press the anti-theft caps into place. These are one-time-use anti-theft caps and cannot be removed once pressed in.
17
5
Share

Which is brighter, xenon headlights or LED headlights for cars?

LED headlights have stronger light. The characteristics of LED car headlights are as follows: 1. Energy-saving: LED car lights are cold light sources, generally consuming less power, saving more than 70% energy compared to traditional light sources; 2. Environmental protection: The spectrum contains no ultraviolet or infrared rays, producing neither heat nor radiation, with minimal glare. The waste is recyclable, pollution-free, and contains no mercury, making it safe to touch and a typical green lighting LED source; 3. Long lifespan: There are no loose parts inside the lamp body, eliminating issues like filament burnout, heat deposition, and light degradation. With appropriate current and voltage, the service life can reach 60,000 to 100,000 hours, more than 10 times longer than traditional light sources; 4. High brightness and high temperature resistance.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.