Is the Li ONE pure electric or hybrid?

How to Reset the Porsche Tire Pressure Light?

To reset the Porsche tire pressure light, insert the key and turn it to the power-on position, then press and hold the SET button for a few seconds. Below are the detailed introductions to the tire pressure monitoring system: 1. Working Principle: The tire pressure monitoring system utilizes the ABS sensing function to compare the rotation counts of the tires. Insufficient tire pressure shortens the tire circumference, causing the rotation count to differ from other tires while driving. 2. Tire Pressure Warning: The tire pressure monitoring system alerts based on wheel speed sensor comparisons. Tire pressure can be checked using a pressure gauge. During driving, the system monitors the inflation pressure of the tires. If the inflation pressure in one tire is significantly lower than the others, the system will issue a warning. As the tire pressure decreases, the working radius of the wheel changes, altering its rotation speed. 3. Initialization: To obtain accurate tire fault information, the system requires the tires to have appropriate initial pressure. Initialization must be performed after adjusting tire pressure, replacing tires or wheels, and when towing a car in trailer mode or after towing.

1

4

Share

What does the letter C stand for in train designations?

C stands for the passenger trains operating on China's national railway lines. Below is an introduction to C-designated trains: 1. Characteristics: C-designated trains have three key features: they are national railway trains, electric multiple unit (EMU) trains, and intercity dedicated line trains. Therefore, C-designated trains are intercity EMU passenger trains operating on national railway lines (including local railways following national railway standards). For example, the Guangfo Metro trains are de facto intercity trains, but because they belong to urban rail transit and not national railway vehicles, they are not designated with a C prefix. The 'Beijiang Star' trains are intercity trains, but since they are not EMUs, they use a T prefix instead of a C prefix. Long-distance trains operating beyond the range of adjacent cities are no longer intercity dedicated line trains and thus use other prefixes (such as D, Z, T, K, etc.), not the C prefix. 2. Hierarchy: In terms of train hierarchy, C-designated trains rank below G-designated trains but above all other train types, i.e., G > C > D > Z > T > K > numeric > L-designated trains.

10

2

Share

Which Provinces Are Using Ethanol Gasoline?

Currently, there are 26 provinces in China promoting the use of ethanol gasoline. Among the initial 11 pilot provinces, six adopted a "fully enclosed" promotion model: Liaoning, Jilin, Heilongjiang, Henan, Anhui, and Guangxi. Five provinces implemented a "semi-enclosed" promotion: Jiangsu, Hubei, Hebei, Shandong, and Guangdong. Subsequently, the promotion expanded to 15 additional provinces, including Beijing, Tianjin, and Hebei. Below is relevant information: 1. Definition of Ethanol Gasoline: Ethanol gasoline is typically marked with a capital letter "E" before the gasoline grade. It is a fuel ethanol processed from grains and various plant fibers. According to China's standards, ethanol gasoline is blended with 10% fuel ethanol and 90% conventional gasoline. 2. Benefits of Ethanol Gasoline: The promotion of ethanol gasoline effectively reduces the emission of harmful gases in vehicle exhaust and helps eliminate carbon deposits in components like spark plugs and combustion chambers. Besides its environmental advantages, it also fosters a positive cycle in agricultural production and consumption, enhancing the value and transformation of agricultural by-products.

9

5

Share

Who to Call for Roadside Tire Blowout Assistance?

In case of a tire blowout on the road, you can dial 12122 for roadside assistance. Below are the specific reasons for tire damage or blowouts: 1. Traumatic Cracking: This type of cracking usually occurs irregularly in terms of location, shape, and size, caused by collisions, compressions, or scraping against foreign objects while driving. Some cracks only affect the rubber surface, while others may damage the tire's body cords, with severe cases leading to instant deflation. If the cracks on the rubber surface are minor, they do not affect the tire's safety and the tire can continue to be used. However, if the cracks reach the body cords or even damage them, it poses a safety hazard, and the tire must be replaced as soon as possible. 2. Aging and Crazing: This type of cracking generally occurs in the later stages of tire usage, commonly seen on the tire shoulders or lower sidewalls, and sometimes at the bottom of the tread grooves. This phenomenon is a natural change in tire rubber due to long-term flexing and heat generation. Driving with consistently low tire pressure can accelerate this process, but usually, it does not affect the tire's service life or safety performance, and early replacement is generally unnecessary.

11

3

Share

How to Report Car Insurance?

For single-vehicle accidents, such as hitting a wall, utility pole, or curb, you only need to take photos as evidence and immediately call the insurance company to report the incident on the spot. Go to an insurance-direct-payment 4S shop or a large repair shop for damage assessment. Generally, consulting the insurance company can provide recommendations, and the advantage is that you don't need to pay upfront. Sometimes, besides the car, there may be other expenses that need reimbursement, such as damage to utility poles or guardrails. The insurance company will confirm how to handle the reimbursement.

18

0

Share

How to Repair Severe Body Rust?

Use a wire brush or sandpaper to remove the paint from the damaged area, then decide whether to replace the entire panel or repair the damaged part based on the extent of the damage. If the damage is severe, it's best to replace the entire panel. If the damage is minor, remove the corroded and weakened metal. Cut zinc-coated sand to roughly match the size and shape of the hole, then apply it over the hole, ensuring the sand edges are slightly lower than the surrounding panel. Cut thin aluminum sheet to match the hole's size and shape, peel off the protective paper, and apply it over the hole. Depending on thickness requirements, apply one or multiple layers.

11

0

Share

Is the Li ONE pure electric or hybrid?

How to Reset the Porsche Tire Pressure Light?

What does the letter C stand for in train designations?

Which Provinces Are Using Ethanol Gasoline?

Who to Call for Roadside Tire Blowout Assistance?

How to Report Car Insurance?

How to Repair Severe Body Rust?

What to Do If a Car Crashes into a Guardrail?

What Does an Engine Timing Belt Kit Include?

What are the differences between Maxus G50 and Buick GL6?

What brand is SGM?