Is the Lexus LX570 in the same class as the Land Cruiser?

What does it mean when the handbrake is not released?

Handbrake not released means it is in the engaged state. Working principle of the handbrake: The handbrake consists of components such as a lever, steel cable, and braking mechanism, and prevents the car from rolling by braking, typically locking the rear two wheels. The entire process involves using the lever principle when pulling up the handbrake, with the steel cable connected to the rear brake wheels, thereby achieving braking of the car. However, the car can still move after the handbrake is engaged mainly because the engine's torque is very large, far exceeding the handbrake's capacity. Damage to the car from forgetting to release the handbrake: Driving without fully releasing the handbrake can cause the brake pads and brake discs to overheat during high-speed and prolonged driving, leading to hardening of the brake pads through quenching over time, which reduces braking effectiveness. Although mechanical handbrakes may sometimes be forgotten to be released, driving a short distance without releasing it will not cause significant damage to the car. At most, this situation will only wear out the brake pads slightly.

4

2

Share

What are the disadvantages of engine circuit protectants?

There are three main hazards associated with engine circuit protectants. Determining required specifications: Before the blending and production process of engine oil, hundreds to thousands of laboratory tests are conducted to develop an excellent laboratory formula. Various driving tests and challenging experiments are also performed on engines, followed by data analysis, to determine whether the oil can meet the requirements of that particular engine. In other words, the oil formula is already well-established before blending and production, ensuring optimal engine protection. Function of anti-wear agents: The main components of engine protectants are anti-wear agents, primarily composed of sulfur, phosphorus, and molybdenum. Sulfur, when added to engine oil, undergoes a series of chemical reactions during high-temperature engine operation, inevitably generating some acidic substances that can directly corrode the engine. As for phosphorus, current national standards have explicitly limited its content in engine oil because phosphorus can cause poisoning of the three-way catalyst. Finally, molybdenum, while an excellent anti-wear element, has a significant drawback: poor solubility. Excessive amounts of molybdenum can precipitate from the oil, forming impurities. Engine protectants disrupt the original oil formula's effectiveness: Engine oil undergoes numerous laboratory and driving tests before leaving the factory, making it a mature product. Adding engine protectants to the oil inevitably alters its original performance and may even disrupt the established formula system.

14

5

Share

Is the Difference Between BMW 7 and BMW 5 Significant?

The difference between BMW 7 and BMW 5 is not very significant, but there are still some subtle distinctions. Body Size Differences: The dimensions of the 5 Series are 5087x1868x1500 mm with a wheelbase of 3108 mm, while the 7 Series measures 5250x1902x1498 mm with a wheelbase of 3210 mm. It can be seen that the 7 Series is slightly larger than the 5 Series, with a wheelbase nearly 100 mm longer. Power Differences: The 530Li Leading Edition of the 5 Series uses a 2.0-liter turbocharged L4 engine with a maximum horsepower of 252 hp, while the 730Li Leading Edition of the 7 Series uses a 2.0-liter turbocharged L4 engine with a maximum horsepower of 258 hp. Additionally, the 5 Series has a maximum power of 185 kW and a maximum torque of 350 Nm, whereas the 7 Series has a maximum power of 190 kW and a maximum torque of 400 Nm. Although the difference in performance between the two models is not substantial, the 7 Series still slightly outperforms the 5 Series. Other Configuration Aspects: There are also many differences in other aspects between the two models, such as tire specifications, suspension, seats, center console, headlights, and other technological configurations.

20

1

Share

How to Replace Vehicle Antifreeze?

Vehicle antifreeze replacement method is as follows: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way water pipe. The five-way pipe is named for its five connections to various parts, and the antifreeze is distributed to different sections of the car through this pipe to function. If there is any antifreeze leakage in this part, replace the water pipe or re-secure the connections as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continue to pour water into the reservoir to allow it to circulate continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to ensure the water circulates. Initially, the water flowing out of the reservoir may have a slight pink tint. Continue adding clean water until the outflow is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop as air is expelled from the system. Top up the antifreeze to the "MAXT" mark on the reservoir.

5

Share

How to Open the Jaguar Fuel Tank Cap?

Jaguar fuel tank cap can be unlocked and opened with the Jaguar key. Press the fuel tank cap and it will pop open by itself. Below is an extended introduction to the fuel tank cap: 1. The fuel tank cap refers to the box on the car used to store gasoline. It is square in shape, made of stainless steel, and has excellent sealing. There is only a small circular opening, about the size of a bottle cap, which facilitates storage. It is generally located at the rear of the car. 2. Modern cars usually allow the trunk and fuel tank cap to be remotely controlled from inside the cabin, providing great convenience to the owner. However, when these features malfunction, they can leave the owner helpless and cause significant trouble. 3. If the fuel tank cap cannot be opened, you can start with the trunk. First, remove the lining panel covering the fuel tank in the trunk. The lining panel is usually secured by some plastic clips and can be easily pried open with a screwdriver. After removing the lining panel, you can see the locking mechanism of the fuel tank cap and the cable used for remote operation. Simply pull the cable to open the fuel tank cap. If this doesn't work, you can press the movable part of the locking mechanism while continuously pulling the cable, and the fuel tank cap will open easily. Some car models have a dedicated switch on the locking mechanism; pressing this switch will open the fuel tank cap.

7

3

Share

Where is the cabin air filter located in the BYD Song MAX?

The cabin air filter of BYD Song MAX is located under the glove box on the passenger side. Here are the steps to locate the cabin air filter: 1. Open the glove box cover, push the pull rod to the right and then remove it. 2. Remove the glove box to reveal the cabin air filter housing cover. 3. Open the cabin air filter cover to access the filter. Functions of the cabin air filter: 1. Absorbs dust particles. 2. Reduces respiratory discomfort for drivers. 3. Minimizes irritation for allergy sufferers. 4. Protects the air conditioning cooling system. Replacement method for BYD Song MAX cabin air filter: 1. Remove the passenger side glove box. Open the glove box, detach the damper, squeeze both sides inward to release the limit clips, allowing the glove box to tilt downward. Alternatively, loosen the upper and lower fixing screws to completely remove the glove box. Note to disconnect the glove box lighting connector. 2. Remove the cabin air filter cover. The elongated cover has clips on both sides - squeeze them toward the center to release. 3. Take out the old filter and install the new one. Pay attention to the orientation - the arrow mark on the new filter should face upward. 4. Reinstall the filter cover and reassemble the glove box in reverse order.

7

3

Share

Is the Lexus LX570 in the same class as the Land Cruiser?

What does it mean when the handbrake is not released?

What are the disadvantages of engine circuit protectants?

Is the Difference Between BMW 7 and BMW 5 Significant?

How to Replace Vehicle Antifreeze?

How to Open the Jaguar Fuel Tank Cap?

Where is the cabin air filter located in the BYD Song MAX?

Can National IV Vehicles Be Registered in Xinxiang?

What is the correct method for one-button start?

What maintenance should be done after driving 40,000 kilometers?

Where is the air filter located in the Audi A8?