Is the Lexus ES200 an imported vehicle?

1 Answers
HavenAnn
07/30/25 3:34am
Lexus ES200 is an imported vehicle. Below are the specific details about the ES200: 1. Body dimensions: The Lexus ES200 measures 4975mm in length, 1865mm in width, and 1447mm in height, with a wheelbase of 2870mm. 2. Powertrain configuration: The Lexus ES200 is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 173 horsepower, paired with a CVT transmission. 3. Feature configuration: The Excellence version includes safety features such as front and side airbags for both front and rear seats, curtain airbags for front and rear, knee airbags, passive pedestrian protection, tire pressure display, lane departure warning, lane keeping assist, and automatic emergency braking system.
Was this review help?
1
3
Share
More Forum Discussions

How many cylinders does the Sylphy engine have?

Sylphy is equipped with a four-cylinder engine. In terms of power, this model offers one powertrain option, featuring a 1.6L naturally aspirated engine with a maximum power output of 139 horsepower and a maximum torque of 169 N·m. It is paired with either a 5-speed manual transmission or a CVT (Continuously Variable Transmission). The new Sylphy largely retains the design of its overseas counterpart, adopting Nissan's signature front grille design where the headlight clusters connect to the grille, and the LED daytime running lights appear more aggressive. Additionally, the redesigned front bumper enhances the car's sporty appearance.
10
1
Share

At what kind of intersections can you make a U-turn while driving?

Intersections where you can make a U-turn while driving include: 1. Intersections with U-turn indicator signs; 2. Intersections without explicit no-U-turn or no-left-turn signs; 3. Intersections with yellow grid lines. Intersections where you cannot make a U-turn include: those with no-U-turn signs or markings; those with no-left-turn signs or markings; railway crossings; pedestrian crossings; bridges; sharp curves; steep slopes; tunnels; and sections prone to danger. Driving precautions: 1. Familiarize yourself with the car's user manual; 2. Drive and operate the car correctly; 3. Reduce the car's load and avoid driving at full capacity; 4. Control the engine speed and vehicle speed, and drive gently; 5. Regularly observe the dashboard and listen to the car's driving sounds to detect hidden issues early and avoid greater losses.
10
4
Share

When is the first and second maintenance time for the new Sylphy?

The first maintenance for the new Sylphy is at three months or 2,500 kilometers, and the second maintenance is at six months or 5,000 kilometers, whichever comes first in terms of mileage or time. Car maintenance involves replacing certain fluids and wear-prone parts in the vehicle. The fluids in a car include engine oil, transmission fluid, coolant, power steering fluid, and brake fluid. The wear-prone parts include spark plugs, the battery, tires, brake discs, brake pads, various filters, and wiper blades. The most important task in maintenance is changing the engine oil, which is referred to as the lifeblood of the engine. Without engine oil, the engine cannot function properly. Inside the engine, oil not only lubricates but also cleans, seals, cushions, dissipates heat, and prevents rust.
18
0
Share

What Causes the Noise When Opening the Car Door?

The reasons for the noise when opening the car door are: 1. Aging of the door seal rubber strip; 2. Loose door glass; 3. Loose screws in the window regulator; 4. Insufficient tightness between the door lock post and the car lock. The door hinges and limiters are parts prone to wear and tear, and are also very likely to produce abnormal noises. If not lubricated in time, it can increase wear, corrosion, and even lead to failure or damage. The function of the door opening limiter is to restrict the degree to which the door can be opened. On one hand, it limits the maximum opening of the door to prevent it from opening too wide; on the other hand, it can keep the door open when needed, such as when the car is parked on a slope or in windy conditions, preventing the door from automatically closing.
4
4
Share

Where is the cabin air filter located in a BMW 1 Series?

The cabin air filter in a BMW 1 Series is typically located inside the glove compartment in front of the front passenger seat. To replace the cabin air filter, you'll need to remove the glove compartment in front of the passenger seat to access and replace the filter. It's generally recommended to perform the replacement during spring or autumn, as the air conditioning is used more frequently in summer, which can lead to faster filter contamination. The functions of a car's cabin air filter include: 1. Filtering air to ensure purified air enters the vehicle cabin; 2. Blocking airborne contaminants like pollen, dust, and particulate matter; 3. Absorbing odors, carbon compounds, sulfur compounds, and other airborne pollutants; 4. Filtering harmful exhaust gases while providing strong moisture absorption to prevent windshield fogging; 5. Maintaining clean cabin air to inhibit bacterial growth, ensuring passenger health and driving safety.
8
3
Share

What Lights to Use When Driving in Rainy Weather?

Driving in rainy weather requires different lights depending on the intensity of the rain: 1. Use parking lights when the rain is light; 2. Turn on headlights or front fog lights when the rain is heavy; 3. Activate rear fog lights during torrential rain. Types of car lights include: headlights, fog lights, brake lights, daytime running lights, and hazard warning lights. Important considerations for using car lights are: 1. Use low beams when driving at night; 2. Do not use high beams when a following vehicle is close to the vehicle in front traveling in the same direction; 3. Alternate between high and low beams when passing through sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night to signal other drivers.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.