Is the Levin Hybrid eligible for green license plates?

1 Answers
KiraFitz
07/30/25 7:23am
The new version of Levin Hybrid can be registered with green license plates. The 2019 new Levin Hybrid adopts a plug-in hybrid powertrain with a pure electric range of 55 kilometers, meeting the requirements for green license plates. Below are the detailed specifications of the model: Powertrain: The all-new Levin Hybrid is equipped with Toyota's latest THS-II hybrid system, paired with a 1.8L Atkinson cycle engine featuring a high compression ratio of 13:1. The engine delivers a maximum power of 72kW at 5200rpm and a peak torque of 142Nm at 3600rpm. The electric motor provides a maximum power of 53kW and a peak torque of 163Nm. Transmission: The system's combined maximum output power reaches 90kW. Coupled with the new-generation parallel E-CVT electronic continuously variable transmission, it not only achieves a low fuel consumption of 4.1L per 100 kilometers under comprehensive driving conditions but also delivers more robust power performance.
Was this review help?
8
0
Share
More Forum Discussions

What is the Scrap Life of Commercial Vehicles?

Commercial vehicle scrap life is as follows: The scrap life of small and mini taxi passenger vehicles is 8 years, medium-sized taxi passenger vehicles is 10 years, and large taxi passenger vehicles is 12 years; The scrap life of public transport passenger vehicles is 13 years, other small and mini commercial passenger vehicles is 10 years, and large and medium-sized commercial passenger vehicles is 15 years; The scrap life of mini commercial trucks is 8 years, light and large commercial trucks is 10 years. Vehicle scrapping process: The owner of the vehicle applying for scrapping and renewal should fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. Apply at the registration acceptance counter, and the "Vehicle Scrapping Notice" will be issued for vehicles that have reached the scrap life. For vehicles that have not reached the scrap life, after being verified by the motor vehicle inspection counter and meeting the scrapping standards, the "Vehicle Scrapping Notice" will be issued. The vehicle owner can choose a qualified recycling company to send the vehicle for dismantling with the "Notice". After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner should submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and vehicle dismantling photos to the motor vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.
12
0
Share

What is the maximum wading depth of the Audi A6L?

According to official specifications, the maximum wading depth of the Audi A6L is 250mm. Common tire specifications include 225/55R18, 245/45R19, and 255/40R20. The vehicle length is 5038mm or 5050mm, with a curb weight ranging from 1800 to 1995kg. It is a 4-door, 5-seater sedan. Maximum wading depth refers to the deepest water level a vehicle can safely pass through. Generally, sedans have a maximum wading depth not exceeding 30cm, while SUVs typically have higher wading depths, though it is advisable not to exceed 50cm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 30cm, the Audi A4 32cm, the Volkswagen Sagitar 30cm, the Land Rover Range Rover 90cm, the Jeep Compass 48cm, and the Highlander 45cm. SUVs clearly surpass sedans in maximum wading depth. Generally, when driving through water, vehicle owners should take different measures based on the water depth and the vehicle's characteristics, as follows: If the water reaches the exhaust pipe height, it is relatively safe. Even if water enters the exhaust pipe, the internal pressure is sufficient to expel it. As long as the engine is not turned off in the water, no backflow will occur. If the water reaches the door frame height, it becomes hazardous. Most electrical circuits, electronic components, and sensors are located at the vehicle's base, risking short circuits and damage to critical components, potentially preventing the car from starting. If the water reaches the air intake height, it is extremely dangerous. Driving into such conditions may cause the engine to stall immediately, leading to permanent damage or rendering the engine unusable.
8
0
Share

What does it mean when the circle P light is on?

p light on indicates the parking brake, in the working state means the handbrake is in the braking position, not released properly. The parking brake refers to the manual brake installed on the vehicle, used to stabilize the car after it has stopped, preventing accidents caused by the car rolling when parked on the road. The common handbrake is usually located at the position where the driver's right hand hangs down. The exclamation mark on the dashboard can be divided into three situations: 1. An exclamation mark inside a circle with brackets: The brake friction pads are damaged, or there is a lack of brake fluid. The solution is to release the parking brake and check if the brake fluid is insufficient. If the light remains on, go to a repair shop to replace the brake friction pads. 2. An exclamation mark inside a triangle: There is a fault with the external lights. The solution is to check if the lights are faulty. If there is no fault and the light remains on, it is recommended to go to a repair shop for maintenance. 3. An exclamation mark inside yellow brackets: There is a problem with the tire pressure of a certain tire. The solution is to observe whether the wheel is punctured or leaking. If not, drive at low speed to find an auto repair shop, beauty shop, or roadside car wash, as these places usually have air pumps to inflate the car. Then observe the dashboard condition again. If the warning light still does not go off, you need to find the settings in the vehicle's central console and perform another tire pressure detection. The light will go off after normal detection.
16
4
Share

What are the differences between China National V and China National VI vehicle emission standards?

The differences between China National V and China National VI emission standards are as follows: Different emission standards: China National VI emission standards are more than 30% stricter than National V. Under the same driving conditions and test influences, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbon and non-methane hydrocarbon emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The National V standard was implemented nationwide on January 1, 2017. The National VI standard has been implemented since July 1, 2019. Different principles: During the National V phase, diesel and gasoline vehicles had different emission standards, but National VI adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Different issuing authorities: The National V standard was issued by the Ministry of Environmental Protection. The National VI standard was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine. Different letter representations: National V is represented by 'V', while National VI is represented by 'VI'. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to National V, National VI has improved monitoring requirements for plug-in hybrid electric vehicles, including regulations on energy storage systems, thermal management systems, brake regeneration, drive motors, generators, etc. The National V standard limits are as follows: Gasoline vehicles must not emit more than 1,000 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM (particulate matter) per kilometer driven. National VI has two standards: National VIa and National VIb, as follows: National VIa standard limits: Gasoline vehicles must not emit more than 700 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM per kilometer driven. National VIb standard limits: Gasoline vehicles must not emit more than 500 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 mg of PM per kilometer driven. Affected by the National VI emission policy, although National V vehicles can still be used normally without restrictions on driving or license plate usage, their resale value will be significantly impacted. For car owners, if they purchase a truck for freight transport with a loan, the vehicle's depreciation after paying off the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, National VI vehicles with longer service life and more road rights have an advantage.
2
4
Share

How to Deal with Wrinkles in the Front Windshield Film?

You can first puncture it with a needle, then smooth it out with a cotton cloth. Alternatively, you can make a small cut on the bubble with a utility knife and then use a card like a bank card to scrape it flat, which will solve the problem of the film wrinkling.
1
4
Share

How to Disassemble the Ren Che Tong?

There is a small horizontal tab at the bottom that can be pried up and removed using a screwdriver or disassembly tool. The small tab is used for connection. To disassemble, bend the section you want to remove backward, then gently pull it to detach.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.