Is the Leiling Engine Domestic or Imported?

1 Answers
DelLillian
08/26/25 5:02am
The Leiling engine is a domestically produced engine, manufactured by Tianjin FAW Toyota Engine Co., Ltd. The engine model of the Leiling is the 4ZR, with a maximum power of 85KW, a maximum torque of 185Nm, and a maximum horsepower of 116. Here are some daily maintenance methods for the Leiling engine: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will degrade during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
17
1
Share
More Forum Discussions

What License Plate Does a Hybrid Vehicle Use?

Hybrid vehicles are issued different license plates depending on the model type: 1. Range-extended hybrid models use blue license plates; 2. Plug-in hybrid models use green license plates. A hybrid vehicle refers to a gasoline-electric hybrid, which combines fuel and electric power, utilizing an electric motor as auxiliary power to assist the engine in driving the vehicle. During vehicle start-stop operations, the hybrid system relies on the electric motor to propel the car, with the engine remaining inactive until a certain speed is reached. Its functions include: maintaining the engine in optimal working conditions, delivering strong performance, and reducing emissions. The powertrain of a hybrid electric vehicle consists of: 1. Control system; 2. Drive system; 3. Auxiliary power system and battery.
1
4
Share

What Causes the Buzzing Sound in the Car Door Lock When Locking?

The reasons for the buzzing sound in the car door lock when locking are: 1. Foreign objects inside the door trim panel; 2. Loose trim panel or audio system; 3. Rusty door hinges; 4. Aging door seals; 5. Poor contact, gaps, or insufficient lubrication in the door lock mechanism; 6. Improperly installed power door lock; 7. Malfunctioning door lock actuator. Solutions for the buzzing sound in the car door lock when locking include: 1. Applying grease to the lock mechanism or wrapping waterproof tape around the lock pin a couple of times; 2. Cleaning the hinges and applying some grease; 3. Applying silicone grease to the door seals, wiping off the excess after absorption; 4. Tightening the trim panel or audio system again.
8
3
Share

Why Does the Car Steering Wheel Always Pull to One Side?

There are several reasons why a car steering wheel may always pull to one side: 1. Excessive free play in the steering wheel; 2. Deviation in wheel alignment values; 3. Damage to the ball joint shock absorber; 4. Inconsistent tire pressure between the two sides of the vehicle; 5. Deformation or poor performance of related components in the vehicle's suspension system. Solutions to address this issue include: 1. Performing a four-wheel alignment; 2. Visiting a maintenance facility to measure tire pressure and ensure uniformity across all tires; 3. Inspecting the suspension and steering system. The working principle of a car steering wheel involves converting circular motion into linear motion through a rack and pinion mechanism, which then drives the rotation of the wheels.
17
0
Share

How to Turn Off the Car's Daytime Running Lights?

To turn off the car's daytime running lights, follow these steps: 1. Insert the car key and turn it to the position where only the radio can be used. Pull the switch on the left side of the combination switch toward the driver's direction while also pulling it downward, and hold it without releasing; 2. Turn on the car key, and after about 3 seconds, a 'dong' sound will be heard, indicating that the operation was successful. Car daytime running lights are used during daytime driving and are installed at the front of the vehicle. They allow other drivers to identify the vehicle during the day and are considered signal lights. The functions of car daytime running lights are: 1. To enhance the vehicle's visibility and ensure driving safety; 2. To improve road safety and reduce traffic accidents.
1
3
Share

What are the rear-engine cars?

Rear-engine cars include the Porsche 911 and Smart. In rear-engine cars, the weight is concentrated at the rear of the vehicle, with the engine positioned close to the drive axle. This setup results in a significant load on the drive wheels, providing strong traction during acceleration, high transmission efficiency, and good fuel economy. It also benefits interior layout, maximizing cabin space utilization. However, rear-engine configurations reduce front-wheel adhesion, leading to less stable steering at high speeds, which affects handling stability. Additionally, they can be harder to diagnose and maintain. The advantages of rear-engine cars are: 1. Easier isolation of the engine from the cabin, reducing vibrations and noise, thus improving ride comfort; 2. The ability to accommodate a large luggage compartment under the floor.
12
2
Share

What are the reasons for the car not starting and making a clicking sound?

The reasons for the car not starting and making a clicking sound are: 1. Insufficient battery power; 2. Low battery voltage; 3. Blocked fuel flow; 4. Poor ignition system performance; 5. Valve sticking; 6. Frozen exhaust pipe. Solutions for the car not starting and making a clicking sound include: 1. Cleaning the fuel system; 2. Removing the spark plugs to clean the oil between the electrodes and reinstalling them; 3. Adding some oil to the combustion chamber; 4. Checking the battery condition; 5. Changing to the appropriate oil; 6. Replacing the spark plugs in time. Methods for maintaining the car battery include: 1. Avoiding parking the car in an open parking lot for extended periods; 2. Regularly cleaning the battery terminals and applying special grease to protect the wiring harness; 3. Avoiding the use of car electronics after the engine is turned off.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.