Is the 'Learn and Reduce Points' System Adding or Deducting Points?

1 Answers
DeCharlie
07/29/25 10:17pm
Learn and Reduce Points is a point deduction system. Below are the specific details about the Learn and Reduce Points system: Continued Deduction Allowed: After participating in Learn and Reduce Points, you can still incur more point deductions. This system only reduces the existing points on your driver's license and does not affect its usability. For example, if you were penalized with 6 points, passing the Learn and Reduce Points exam would clear those 6 points, allowing you to start fresh. Depends on Pre-Reduction Deductions: The number of points you can deduct after participating in Learn and Reduce Points depends on how many points you had before the reduction. However, the total accumulated deductions cannot exceed 11 points. Whether or not you participate in Learn and Reduce Points, your driver's license only has 12 points. The Learn and Reduce Points system only reduces existing points on your license; it does not increase the total points to 18.
Was this review help?
17
0
Share
More Forum Discussions

What is the Driver's Physical Condition Certificate?

Motor vehicle driver's physical condition certificate, commonly known as the medical examination form, requires the driver to undergo examination at a county-level or above hospital or a military hospital at the regimental level or above. The examination mainly includes vision and limb checks, and the process is quick. The following are the requirements for obtaining a driver's license: 1. Height: Must meet the vehicle type requirements. 2. Vision: Must not be color blind. 3. Hearing: Must have normal hearing. 4. Color discrimination: Must not have red-green color blindness. 5. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement function. However, applicants with missing fingertip segments or a missing right thumb can apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles. 6. Lower limbs: Both lower limbs must be intact with normal movement function, and the length difference must not exceed 5 cm. However, applicants with a missing left lower limb or impaired movement function can apply for a driver's license for small automatic transmission cars. Those with a missing right lower limb, both lower limbs, or impaired movement function but able to sit independently can apply for a driver's license for small automatic transmission passenger vehicles designed for the disabled. 7. Trunk and neck: Must have no movement dysfunction.
10
1
Share

Is it illegal to hang national flags on both sides of a car?

It is not illegal. However, the flags must be hung in appropriate positions to show respect for the national flag, so caution is necessary. More detailed information is as follows: 1. Hang small national flags, but they must be placed in appropriate positions: This demonstrates respect for the national flag; otherwise, it may have the opposite effect. Therefore, it is crucial to be careful. If there is no suitable position, it is better not to hang them. Alternatively, you can choose to place a national flag sticker on the upper part of the front windshield where it does not obstruct the view. 2. The national flag is a symbolic banner of a country and represents the nation: People often hang national flags to express their love for their own country or respect for other countries. It is prohibited to hoist damaged, soiled, faded, or non-standard national flags. The national flag and its design must not be used as trademarks or in advertisements, nor should they be used in private funeral activities. It is forbidden to intentionally insult the national flag of the People's Republic of China by burning, damaging, scribbling, defiling, trampling, or other means. The national flag must not be hung upside down. Due to the design and text on some national flags, they should not be hung vertically or reversed. Some countries explicitly stipulate that a specially made flag with the design properly oriented must be used for vertical hanging.
3
2
Share

How many points are deducted for driving through a red light at an intersection?

Points deduction for running a red light: According to the new traffic regulations, driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points. However, not all situations will lead to a 6-point deduction for the driver. 1. If there is a violation such as making a left turn in a straight lane at an intersection, it will still be recorded as 'violation of prohibition signs' under the Road Traffic Safety Law, resulting in a 3-point deduction. Additionally, running a red light captured by cameras will only incur a fine without point deduction. Traffic police explain that since not all motor vehicles are driven by their owners, it is difficult to determine the driver who ran the red light, so for non-on-site penalties for running a red light, no point deduction will be imposed for the time being. 2. When an intersection electronic eye captures the illegal act of running a red light, it generally takes 3 photos as evidence. One photo shows the vehicle before it crosses the stop line during the red light, and the other two photos show the vehicle continuing to move forward during the red light, crossing the stop line and completely entering the intersection. The 3 photos will clearly record the vehicle's movement during the red light. If the vehicle has just crossed the stop line during the red light but stops immediately, the traffic management department will not impose any penalty.
3
2
Share

Is it necessary to buy a 4WD CR-V?

CR-V 4WD models are suitable for driving on slippery surfaces such as rain and snow. Below are the specific details about the Honda CR-V: 1. Drivetrain: The Honda CR-V offers two variants: one is a two-wheel-drive (2WD) version, and the other is a four-wheel-drive (4WD) version. The 4WD model uses a front-engine, four-wheel-drive system with an on-demand 4WD configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power output of 114 kW and a peak torque of 190 N·m, while the 2.4L engine produces a maximum power of 140 kW and a peak torque of 222 N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, the VTEC engine differs in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve-driving cams for low-to-mid and high-speed ranges. These can be automatically switched via the electronic control system. With the VTEC system, the engine can adjust valve opening timing and lift according to driving conditions, thereby altering intake and exhaust volumes. This enhances power output, reduces fuel consumption, and minimizes emissions.
20
1
Share

What brand is Wuben motorcycle?

Wuben motorcycle is a brand under Zhejiang Kaikai Meiduo Motorcycle Co., Ltd. Additional information: 1. Power: Motorcycles are two or three-wheeled vehicles driven by gasoline engines and steered by handlebars, offering lightweight maneuverability and rapid movement. 2. Usage: Widely used for patrolling, passenger and cargo transportation, and also as sports equipment. 3. Components: Motorcycles consist of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation. The transmission system includes primary reduction, clutch, gearbox, and secondary reduction.
14
5
Share

How to adjust the left and right of the Lingdong car lights?

First, open the front hood and locate the adjustment hole above the headlight position. Turn on the headlights and aim them at a flat wall, then adjust the screws up and down. Below is more information about car lights: 1. Lighting lamps: Lighting lamps should provide good illumination while minimizing glare. For headlights, both high beam and low beam modes are used to balance these two requirements. 2. High beam: This is a long-distance illumination beam used when there are no oncoming vehicles or when not following other cars. It is generated by the main filament with higher power located at the focal point of the reflector, with the beam direction approximately horizontal. It is usually specified that the maximum luminous intensity of a single lamp should not be less than 20,000 candelas. To ensure driving safety, the illumination distance of the high beam (the distance to detect and recognize obstacles) should be greater than the braking distance required for timely stopping. 3. Low beam: This is a short-distance illumination beam used when encountering oncoming vehicles or following other cars. It is generated by a secondary filament with lower power, which is offset from the focal point and optical axis of the reflector, causing the beam to project downward. To limit the beam above the horizontal direction, a metal light shield is usually installed below the secondary filament, creating a sharp light-dark transition on the vertical screen. When encountering oncoming vehicles, the driver's eyes are located in the dark area of the low beam pattern, thereby minimizing glare.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.