Is the Land Rover Discovery Sport domestically produced?

What to do if the Roewe i6 makes abnormal noise when starting and stepping on the brake?

If the Roewe i6 makes abnormal noise when starting and stepping on the brake, it is mostly due to the material of the brake pads themselves. It is best to replace such components at a specialized repair shop. If the abnormal noise is obvious, it is recommended to go to a repair shop to replace or polish the brake pads to solve the problem. Here are some maintenance methods for brake pads: 1. Under normal driving conditions, check the brake shoes every 5,000 kilometers. Not only check the remaining thickness, but also the wear status of the shoes, whether the wear on both sides is the same, and whether they return freely. If any abnormality is found, it must be dealt with immediately. 2. When replacing, use the brake pads provided by the original factory spare parts. Only in this way can the braking effect between the brake pads and the brake disc be the best, with minimal wear. 3. When replacing the shoes, special tools must be used to push the brake caliper back. Do not use other pry bars to force it back, as this can easily cause the brake caliper guide screws to bend and the brake pads to get stuck. 4. After replacing the brake shoes, a running-in period of 200 kilometers is required to achieve the best braking effect. Therefore, the car should be driven carefully immediately after replacing the shoes.

14

3

Share

Is It Enough to Just Repair the Car After a Collision?

After the car is repaired following a collision, you can also claim compensation for lost wages, transportation expenses, and other legally supported items from the other party. Legal Basis for Compensation Claims: According to Article 35 of the "Road Traffic Accident Handling Regulations": The party responsible for a traffic accident shall bear corresponding damages liability based on their responsibility for the accident. The items of damages compensation include: medical expenses, lost wages, hospitalization meal subsidies, nursing fees, living subsidies for the disabled, disability appliance costs, funeral expenses, death compensation, dependent support expenses, transportation costs, accommodation expenses, and direct property losses. The compensation items specified in the preceding paragraph shall be determined based on actual circumstances, and the costs shall be settled in one lump sum. Notes on Claiming Compensation: Medical expenses shall be determined based on the receipts issued by medical institutions for medical fees, hospitalization fees, etc., combined with medical records, diagnostic certificates, and other relevant evidence. The amount of medical expense compensation shall be determined based on the actual amount incurred before the conclusion of the first-instance court debate. Lost wages shall be determined based on the victim's lost work time and income status. If the victim has a fixed income, lost wages shall be calculated based on the actual reduced income. If the victim does not have a fixed income, it shall be calculated based on their average income over the past three years.

9

4

Share

Does the width of a car include the side mirrors?

The width of a car does not include the side mirrors. The body width is defined as the distance between the two extreme points in the width direction of the car, that is, the distance between the leftmost and rightmost protruding positions of the body. Method for measuring car width: To measure the width of a car, simply measure the distance from the leftmost to the rightmost point. However, it should be noted that the "fixed protruding parts on both sides" do not include side marker lights, rearview mirrors, position lights, flexible mudguards, anti-skid chains, turn signals, or the deformed parts of tires in contact with the ground. According to industry standards, the body width does not include the width extended by the left and right rearview mirrors, meaning the most protruding positions should be selected after the mirrors are folded. The significance of body width and common car widths: According to national standards, the significance of car width data is to provide sufficient space between two vehicles when overtaking and to prevent accidents or road markings due to excessive width. Additionally, on narrow roads, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage. Common private car widths generally range between 1600mm and 1800mm, with an upper limit not exceeding 2000mm.

11

5

Share

Can Car Body Dents Be Repaired?

Car body dents can be repaired. Generally, the larger the dent, the longer the repair time will take. Different degrees of dents require different repair methods. Repair Methods for Minor Dents: Minor dents are surface damage where only the metal panel is dented, and the paint is not damaged. Special hooks can be used to pry out the dent, followed by tapping it back into place with a rubber hammer and smoothing it out. This method causes minimal damage to the car's paint. Alternatively, car owners can use suction rods or bridge-type dent repair tools. Fix the suction cup to the car body, place the suction rod on top of the small suction cup, and pull it up forcefully. Then, gradually move the suction cup and repeat the pulling process. When using a bridge-type dent repair tool, fix two suction cups on either side of the dent, apply strong adhesive to the dent, and once the adhesive is set, use its pulling force to restore the dent to its original shape. Repair Methods for Moderate Dents: Moderate dents involve damage to surface components and the paint, but the underlying frame remains intact. In such cases, repairs must be done at a professional panel beating and painting facility. Repair Methods for Severe Dents: Severe dents often come with damage to the vehicle's frame, requiring replacement of the affected parts followed by a full-body repaint.

18

3

Share

What Causes No Sound When Playing Music via Bluetooth in Car Navigation?

Car multimedia system volume or phone volume not turned on, programming and pairing codes mismatch, and not selecting Bluetooth audio source can all lead to no sound when playing music via Bluetooth. Multimedia system volume or phone volume not turned on: When the car multimedia system volume or phone volume is not turned on, connecting to Bluetooth for music playback may result in no sound. While playing music, press the phone's volume button to adjust the volume. Set the media volume to maximum, then adjust the car's volume. Programming and pairing codes mismatch: Some phones' music playback programming does not match the car model's pairing codes, allowing only phone calls but not music playback. The Bluetooth playback frequency band needs to be changed. In the phone's Bluetooth settings, check the option [Use Bluetooth for multimedia music playback] to successfully establish a match. Not selecting Bluetooth audio source: When using Bluetooth to play music, the audio source must be set to Bluetooth to play Bluetooth music. You can swipe on the central control display to switch to the Bluetooth music playback interface. If playback still fails after switching, try switching to FM and listen carefully to see if there is sound from the speakers to rule out audio system faults.

20

1

Share

What Causes a Car with Power to Fail to Start and Produce Abnormal Noises?

Insufficient battery voltage, fuel supply system malfunctions, and poor ignition system performance can all lead to a situation where the car has power but fails to start while producing abnormal noises. Insufficient Battery Voltage: Battery failure or excessive discharge can result in insufficient power, making it unable to drive the starter motor. Normally, the starting voltage of the battery should not be lower than 11.45V. If the voltage is below this threshold, the car will not start properly. You can use a multimeter to check the voltage between the battery terminals. If necessary, replace the battery or use jumper cables to start the car. Fuel Supply System Malfunction: Blockages in the low-pressure fuel line, loose or leaking pipes, air in the high-pressure fuel line, poor technical condition of the injectors, or incorrect injection timing can all cause fuel supply system malfunctions. In such cases, there will be insufficient combustible gas in the cylinders, preventing the car from starting. It is necessary to visit a repair facility to systematically check whether all components of the fuel supply system are functioning properly. Poor Ignition System Performance: Components such as the ignition coil and spark plugs in the ignition system are wear-prone parts and typically need to be replaced every 50,000 to 80,000 kilometers. If they are not replaced for a long time, the insufficient ignition energy will fail to completely ignite the combustible gas mixture in the cylinders, preventing the car from starting.

9

2

Share

Is the Land Rover Discovery Sport domestically produced?

What to do if the Roewe i6 makes abnormal noise when starting and stepping on the brake?

Is It Enough to Just Repair the Car After a Collision?

Does the width of a car include the side mirrors?

Can Car Body Dents Be Repaired?

What Causes No Sound When Playing Music via Bluetooth in Car Navigation?

What Causes a Car with Power to Fail to Start and Produce Abnormal Noises?

How to Adjust the Instrument Panel of the Trumpchi GS4?

What are the penalties and demerit points for driving without insurance?

Why Are Off-Road Vehicles Not Afraid of Water?

What causes severe engine shaking in Nissan A33?