Is the Land Cruiser domestically produced?

What is the complete process of the Subject 3 driving test?

Subject 3 driving test is conducted sequentially according to the established test items. Each item is usually preceded by a voice prompt. The following are all the test items and their sequence for Subject 3: Preparation before getting on the car: For the first time getting on the car, verify identity information first, and get off the car after the safety officer confirms. Perform a vehicle inspection, and confirm safety. After getting on the car, adjust the rearview mirror and seat position, and check whether the gear, handbrake, lights, etc. have been reset. Starting: Turn on the left turn signal and start with gear 1. Straight-line driving: Ensure straight-line driving by slightly adjusting the steering wheel (excessive adjustment will lead to disqualification). Gear shifting: You can keep your left hand on the steering wheel and your right hand on the gear lever. Be careful not to skip gears, and pause briefly in the neutral position each time you shift gears to avoid the system misjudging the operation as an error due to too fast operation. Lane change: When you hear "Please change lanes," turn on the turn signal, and wait for 3 seconds before turning the steering wheel. Going straight through an intersection: Slow down in advance and shift to a low gear (1-2). Stop and wait if necessary, and do not compete with pedestrians. Left turn at an intersection: When you hear "Left turn ahead," turn on the left turn signal in advance (wait for 3 seconds before turning left). Right turn at an intersection: When you hear "Right turn ahead," turn on the right turn signal in advance (wait for 3 seconds before turning right). Passing a crosswalk: When you hear "Crosswalk ahead," slow down and reduce speed to below 30km/h. Passing a school zone: Slow down to below 30km/h in advance and pass slowly in gear 2. Passing a bus stop: When the student sees a bus stop ahead, slow down to below 30km/h in advance. Meeting: When vehicles meet, the student should pay attention to oncoming vehicles and drive on the right side of the lane until the meeting is over. Overtaking: When overtaking, turn on the left turn signal first, observe the vehicles in the left rear lane through the rearview mirror, and confirm safety. After the turn signal has been on for 3 seconds, turn the steering wheel to the left and gradually enter the left lane to overtake. When overtaking the vehicle, confirm a safe distance from the overtaken vehicle, turn on the right turn signal, and observe the vehicles in the right rear lane. After confirming safety and waiting for the right turn signal to be on for 3 seconds, return to the original lane. U-turn: Before making a U-turn, slow down and shift to a lower gear, turn on the left turn signal in advance (more than 3 seconds), and make a quick U-turn after confirming safety. Simulated night driving: Do not rush to answer. Complete the specified operation within 5 seconds after the voice prompt is completed. Pulling over: The candidate turns on the right turn signal (more than 3 seconds), parks the vehicle (right side) parallel to the curb (or solid line at the edge of the road) within 30 cm, but does not press the curb (or solid line at the edge of the road), stabilizes the vehicle, pulls up the parking brake, and shifts to neutral.

7

1

Share

What is the actual range of the Wuling Hongguang Mini?

The Ministry of Industry and Information Technology (MIIT) provides a range of 120 kilometers for the Easy and Comfort models, and 170 kilometers for the Enjoy model. Here is some information about the Wuling Hongguang Mini: 1. The Wuling Hongguang Mini has a wheelbase of 1940 mm, with length, width, and height dimensions of 2917 mm, 1493 mm, and 1621 mm respectively. 2. The Wuling Hongguang Mini is a single-motor vehicle, with the motor positioned at the rear, making it a rear-wheel-drive car. The motor of the Wuling Hongguang Mini has a maximum power of 20 kW and a maximum torque of 85 Nm.

8

0

Share

Can I Get 6 Points Deducted Just After Obtaining My Driver's License?

Yes, you can get 6 points deducted just after obtaining your driver's license. For large vehicle licenses, deducting 6 points during the probationary period will extend the probation by one year. However, for ordinary small vehicle licenses, there is no significant impact, except that accumulating 12 points will result in the revocation of your driving privileges. Additional Information: According to Article 79 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if a driver accumulates 12 points for traffic violations during the probationary period, the driving privileges for the vehicle type under probation will be revoked. If the revoked license is not for the highest permitted vehicle type, the highest permitted vehicle type driving privileges will also be revoked as per the first paragraph of Article 78. New Regulations on Driver's License Points Deduction: Driving under the influence of alcohol, operating a vehicle that does not match the licensed type, or carrying more than 20% of the allowed capacity on a school bus will result in 12 points deducted at once. Driving with a suspended license or violating traffic signals will result in 6 points deducted. Driving below the minimum speed limit on highways or failing to undergo regular safety inspections will result in 3 points deducted. Not driving according to regulations or engaging in unsafe driving practices will result in 2 points deducted. Improper use of lights, failure to yield when meeting another vehicle, or not carrying a driver's license will result in 1 point deducted. Therefore, drivers must strictly adhere to legal requirements to ensure road safety. The Role of a Driver's License: A driver's license certifies that the holder is legally permitted to drive. Officially known as a Motor Vehicle Driver's License, or simply "driver's license," it is a legal document required for operating motor vehicles. In China, a driver's license is defined as a legal credential issued by the authorities to individuals who have learned and mastered traffic regulations and driving skills, passed the required tests, and are permitted to drive specific types of motor vehicles.

3

5

Share

How Many Lumens for Car LED Headlights?

Lumens of car LED headlights: 1. The first type is the original halogen bulb, with a 55w halogen bulb producing 1000 lumens. Halogen technology is mature, leaving little room for brightness improvement. 2. The second type is xenon headlights, with a 35w xenon bulb producing 3500 lumens, achieving 100 lumens per watt. 3. The third type is LED headlights. A 35w LED light produces 3200 lumens, achieving 91 lumens per watt. Below is related information about LED headlight lumens: 1. Xenon headlights are categorized into 120V, 240V, and 380V, with wattages ranging from tens to thousands of watts. 2. Automotive xenon headlights are improved versions of industrial xenon headlights, operating at 12V with wattages of 35W and 55W. Most vehicles use 35W, while a few use 55W, typically installed in high beams. 3. The lumen range is 3500-5500.

2

Share

What brand is Sailun tire?

Sailun tire is a brand of Sailun tires. The following is relevant information about Sailun: 1. Sailun Group was established in 2002, mainly engaged in the production and operation of all-steel, semi-steel, and engineering radial tires. 2. Sailun is a Malaysian brand, later acquired by Qingdao Jinyu Group. 3. Sailun tires are independently developed and produced by Sailun Group, primarily manufacturing radial tires. The company integrates tire research and development, production, sales, and services. Radial tires are further divided into four categories. 4. These include all-steel radial tires for heavy loads, semi-steel radial tires, engineering radial tires, and retreaded tires. Sailun tires enjoy high recognition, and their sales market currently covers more than 100 countries and regions, including Europe, America, Asia, and Africa.

3

0

Share

Differences Between Right-Side and Left-Side Reverse Parking

The differences between right-side and left-side reverse parking are as follows: 1. The steering wheel turning directions are different. For right-side parking, turn the steering wheel fully to the right; for left-side parking, turn it fully to the left. 2. In right-side parking, observe the left rearview mirror - turn the wheel fully right when the mirror's lower edge passes the right boundary line, then enter the space. 3. For left-side parking, observe the left rearview mirror about 10cm earlier compared to right-side parking. Precautions for reverse parking: 1. Generally start in 1st gear; avoid selecting wrong gear. 2. Don't turn the steering wheel in wrong direction: both hands turn right when approaching, single hand turns left when reversing. 3. Slowly release the clutch to prevent stalling. 4. When controlling speed well, turn the steering wheel as quickly as possible. If conflicting, prioritize speed control. 5. When stopping unexpectedly, also release clutch slowly to avoid stalling. 6. Never misidentify poles and strictly prevent car from hitting them. 7. When returning the steering wheel, don't miscount turns. 8. Stay relaxed and maintain an easy-going attitude. 9. Wear thick-soled sneakers.

5

3

Share

Is the Land Cruiser domestically produced?

What is the complete process of the Subject 3 driving test?

What is the actual range of the Wuling Hongguang Mini?

Can I Get 6 Points Deducted Just After Obtaining My Driver's License?

How Many Lumens for Car LED Headlights?

What brand is Sailun tire?

Differences Between Right-Side and Left-Side Reverse Parking

How many kilowatt-hours does it take to fully charge a 60V tricycle?

Should You Shift to Neutral at Traffic Lights?

Reasons for Unstable Engine Idle and Vibration

How Long Does It Take to Fully Charge an Electric Vehicle with Fast Charging?