Is the Lamando GTS a 2.0T?

Causes of Engine Acceleration Noise?

The causes and solutions for engine acceleration noise are as follows: 1. Aging or loosening of engine mounts. Solution: Tighten or replace the engine mounts. 2. Improper use of engine oil quality. Solution: Use the engine oil grade specified in the vehicle manual and avoid mixing different brands of engine oil. 3. Engine misfire. Solution: Inspect the working condition of each ignition coil and cylinder spark plug. 4. Drawbacks of direct fuel injection. Solution: Install engine sound insulation padding to reduce noise. 5. Timing gear noise. Solution: Tighten or lubricate the timing belt and replace damaged gears. 6. Engine carbon buildup. Solution: Clean the throttle body or drive at high speeds to remove carbon deposits.

7

0

Share

Why can't the Geely Xingrui use 92 gasoline?

Geely Xingyue's commonly used oil is 95 gasoline. Mixing different types of gasoline can easily lead to ignition system or spark plug failures, affecting the vehicle's lifespan. Therefore, the Geely Xingrui cannot use 92 gasoline. Below are detailed introductions about the Geely Xingyue: 1. Overview: The Geely Xingrui is a new compact sedan under Geely Auto, the first sedan based on Geely's CMA super architecture. The Xingrui is equipped with a 12.3-inch full LCD instrument panel and a 12.3-inch high-definition central control screen, with a wheelbase of 2800mm. 2. Powertrain: It is powered by a Volvo Drive-E series 2.0TD direct-injection turbocharged engine. The maximum power is 190 horsepower, and the maximum torque is 300 Nm, paired with a 7DCT transmission.

8

4

Share

Engine Feels Sluggish and Lacks Acceleration Power?

The causes and solutions for an engine feeling sluggish and lacking acceleration power are as follows: 1. Ignition system issues. For example, spark plugs have reached their lifespan limit, excessive gap between spark plug electrodes, severe leakage in individual spark plugs, or heavy carbon buildup on spark plugs. Solution: Replace the spark plugs. 2. Intake system problems. Leading to an overly rich or lean air-fuel mixture, such as throttle body blockage, abnormal throttle opening, or carbon buildup in the throttle body. Solution: First, clean the throttle body to see if it resolves the issue. If the problem persists, replace the throttle body. 3. Fuel system issues. First, consider whether the fuel injectors are problematic, such as poor fuel atomization or severe carbon buildup in the injectors. Solution: Clean or replace the fuel injectors.

14

0

Share

Should the Geely Xingyue use 92 or 95 octane gasoline?

Xingyue cannot use 92 octane gasoline because this engine is from Volvo's D-E series and requires at least 95 octane gasoline. Below is a related introduction to the Geely Xingyue: Configuration: The Xingyue is equipped with Volvo's Drive-E series 2.0TD engine + 7DCT combination, with a maximum power output of 190 horsepower and a peak torque of 300 N·m. Thanks to the CMA architecture, it features a MacPherson front suspension, E-type multi-link independent rear frame, ZF DP-EPS power steering system, ITT brake pads, long-travel shock absorbers, etc., providing strong grip and excellent cornering handling. Interior: The Geely Xingyue adopts a brand-new "Time and Space Overlapping Cockpit" design, with very fluid and clean overall lines. The interior uses a yacht blue and premium gray color scheme, a flat-bottom three-spoke multifunction steering wheel, a 12.3-inch LCD instrument panel, and a floating 12.3-inch central control screen, giving it a strong sense of technology.

13

5

Share

What is the fuel consumption of the old Nissan Qashqai 2.0 model?

The comprehensive fuel consumption of the Nissan Qashqai is 6.2-6.4L/100km. There are currently 4 models of the Nissan Qashqai on sale. The TOP flagship version has a fuel consumption of 6.4L/100km. The Prem luxury edition, Prem.Pro luxury navigation edition, and XV smart edition have a fuel consumption of 6.2L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.9-8.5L/100km. The specific factors affecting a car's fuel consumption are as follows: Vehicle weight: Larger and heavier vehicles tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV weighing about 1.5 tons has a fuel consumption of 8.5 liters. Different weights result in different fuel consumption levels. Wind resistance: Higher wind resistance increases fuel consumption during driving. Vehicles with better aerodynamics have lower wind resistance, which in turn reduces fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point where fuel consumption is minimized. Generally, small-displacement cars reach this point at around 70 km/h, while larger-displacement cars reach it at about 100 km/h. Maintaining speed within this economical RPM range can significantly reduce fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a traffic light can increase fuel consumption.

13

5

Share

What transmission does the Fiat Perla use?

Fiat Perla's transmission manufacturer is Fiat Automobiles S.p.A. Established in July 1899 in Turin, Italy, it is the world's first automobile manufacturer to produce microcars. Its car division mainly includes Fiat, Maserati, Ferrari, Alfa Romeo and Lancia. The Fiat Perla uses a 5-speed manual transmission. A manual transmission is a gear-shifting device used to alter the engine's speed and torque transmitted to the drive wheels, enabling the vehicle to obtain different traction and speed under various conditions such as starting from standstill, climbing hills, turning corners, and accelerating. For the Fiat Perla's transmission in daily use, pay attention to the following points: Do not go for extended periods without changing the transmission oil. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing; Avoid prolonged coasting in neutral. While driving manual transmission models, many "experienced drivers" tend to coast in neutral, but for automatic transmission models, this can cause the transmission to overheat and produce a certain impact when shifting back to D gear; Never shift into D/R gear before coming to a complete stop. Many drivers, to showcase their "smooth" operation, shift directly into reverse gear before the vehicle has fully stopped, which can significantly damage the transmission gears and, over time, lead to gear grinding and other faults; Do not frequently use D gear to climb steep slopes. When facing steep inclines, automatic transmission vehicles often overheat due to high load or shift up too early, resulting in insufficient climbing power. In such cases, use manual mode to limit to lower gears or sport mode to protect the transmission; Do not tow over long distances. When an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while in N gear, rather than using a tow rope or directly towing the vehicle.

8

3

Share

Is the Lamando GTS a 2.0T?

Causes of Engine Acceleration Noise?

Why can't the Geely Xingrui use 92 gasoline?

Engine Feels Sluggish and Lacks Acceleration Power?

Should the Geely Xingyue use 92 or 95 octane gasoline?

What is the fuel consumption of the old Nissan Qashqai 2.0 model?

What transmission does the Fiat Perla use?

Latest Process for Replacing a Driver's License

What maintenance is required for a car at 25,000 kilometers?

What is the working principle of an oil-gas separator?

What is the difference between Geely and Emgrand?