···
Log in / Register

Is the Karry K60 Engine Made by Chery?

1 Answers
LeTaylor
09/06/25 8:09am

Karry K60 engine model: The Karry K60 is equipped with a 1.5L naturally aspirated engine from Chery, model ACTECO-SQRD4G15 (Mitsubishi imitation), which has won the title of China's Top 10 Engines. Introduction to the Karry K60 engine: The Karry K60 is powered by a 1.5L engine from Chery's ACDECO series, with a maximum power output of 109 horsepower and a peak torque of 140 Nm. This engine is a mature product that has been installed in multiple passenger vehicles under the Chery brand, such as the Fulwin 2, Chery E3, and Arrizo 3. For the transmission system, users can choose between a 5MT or a 4AT. Engine performance indicators: Engine performance indicators are used to characterize the performance features of an engine and serve as the basis for evaluating the performance of various types of engines. The main performance indicators of an engine include: power indicators, fuel economy indicators, environmental indicators, reliability indicators, and durability indicators.

Was this review help?
15
3
Share
More Forum Discussions

Why are points deducted for overtaking oil tankers?

Points are deducted for overtaking oil tankers because special vehicles are not allowed to be overtaken. Below are the specific details about overtaking: 1. Overtaking lane: On highways, counting from the left side along the direction of motor vehicle traffic, the first lane is the overtaking lane, while the second, third, and other lanes are driving lanes. 2. Prohibited overtaking situations: Overtaking is strictly prohibited when passing through dangerous sections such as intersections, steep slopes, sharp curves, during adverse weather conditions like rain or fog, when the vehicle ahead signals a left turn, U-turn, or is overtaking another vehicle, and in areas with no-overtaking signs. 3. Precautions: Choose straight and wide roads with good visibility, no obstacles on either side, and no oncoming vehicles within 150 meters ahead to ensure safety before overtaking.
13
3
Share

What are the differences between the 5-seater and 7-seater BMW X5?

Here are the specific differences between the 5-seater and 7-seater BMW X5: 1. Compulsory traffic insurance and seat insurance: Seat insurance, also known as passenger liability insurance, costs more for the 7-seater due to two additional seats. 2. Annual inspection: The 7-seater is more troublesome in terms of annual inspection. The 5-seater only requires a change of the annual inspection sticker, while the 7-seater needs to undergo inspection every two years within the first six years. 3. Space: The 7-seater offers more space than the 5-seater. The 7-seater multi-purpose vehicle is built on a sedan platform to ensure product safety, uses independent suspension to guarantee riding comfort, and provides a more comfortable driving environment with its larger space.
18
0
Share

What does the exclamation mark on a BMW X5 mean?

An exclamation mark on the car's dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and wiper fault indicator light. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: An exclamation mark with a horizontal line below parentheses. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue. In addition, during daily use of the vehicle, the warning lights displayed on the dashboard are divided into two different colors, yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, they will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect the car and eliminate safety hazards.
19
2
Share

What is the reason for the 8th generation Accord's RPM increasing but speed not increasing?

The reason for the 8th generation Accord's RPM increasing but speed not increasing is poor fuel pump performance during normal vehicle operation. Below are relevant details: 1. Insufficient fuel pressure: Poor fuel pump performance, clogged fuel filter or injectors, lack of power during acceleration, which indicates clutch component failure. The occurrence frequency increases with rising temperatures. Throttle body issues, sticking or stepper motor failure. Exhaust system or catalytic converter blockage. Electrical circuit open or short circuit, poor conduction. 2. Throttle: The throttle refers to the control device that regulates engine power (thrust). In piston aircraft engines, the throttle controls the carburetor's throttle valve opening to regulate cylinder filling, thereby determining the engine's output power.
16
1
Share

What is the difference between 95Y and 95W tires?

The differences between 95Y and 95W tires are as follows: 1. W indicates a designed maximum speed of 270 kilometers per hour. 2. Y indicates a designed speed of 300 kilometers per hour. 3. 95 and 91 are the load indexes of the tires. The load index and maximum load capacity of each tire are molded on the tire sidewall. 95 corresponds to a maximum load of 690KG per tire. 95 represents a maximum load of 690 kilograms for a single tire. Extended information: The following are precautions for tire use: 1. Regularly check tire pressure: Tire pressure is an important factor affecting tire life. It should not be too high or too low. Inflate according to the tire pressure indicated on the vehicle. 2. Check tire wear: Mainly observe whether the tread depth on both sides of the tire is consistent. 3. Remove foreign objects: Promptly remove small stones and other foreign objects from the tires. Foreign objects in the tire treads pose potential hazards and can easily splash out while driving. Therefore, small stones and other debris should be removed with a key or similar tool to ensure the tires are kept as clean as possible.
19
0
Share

What does the tire size 245/45r19 mean?

The tire size 245/45r19 refers to the dimensions of the tire. Here are the relevant details: 1. 245 indicates the cross-sectional width of the tire is 245 millimeters; 2. 45 represents the aspect ratio of 45%; 3. R stands for radial tire construction; 4. 19 denotes the rim diameter of 19 inches; 5. Y is the speed rating, indicating the maximum speed of this tire is 300 km/h. Additional information: Tire types include: international standard tire codes, which express the section width and aspect ratio as a percentage in millimeters. This is followed by: tire type code, rim diameter (in inches), load index (permissible load-carrying capacity code), and permissible speed code.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.