Is the Jetta automatic transmission made by Aisin?

How to Walk Around the Vehicle in the Subject 3 Driving Test?

Start walking around the vehicle from the left front door. Here are the detailed steps for the vehicle inspection in Subject 3: 1. Inspect the vehicle surroundings: Check the four tires for insufficient pressure, ensure all doors are properly closed, and look for any obstacles around the vehicle that may affect starting. 2. Observe traffic conditions: Pay attention to the traffic coming from both the front and rear lanes. If the road conditions are complex and potentially dangerous, promptly move to a safe area. Before opening the door, observe the traffic behind you again to ensure safety, then enter the driver's seat. 3. Deduction criteria: Failing to inspect the vehicle and surrounding traffic conditions, or improperly handling situations, will result in an immediate deduction of 100 points.

6

0

Share

What Causes Black Smoke from a Car's Exhaust Pipe?

Black smoke from a car's exhaust pipe is caused by: 1. Poor performance or damage to the fuel injector; 2. Low fuel injector pressure; 3. Clogged air filter or damaged air flow meter; 4. Engine misfire; 5. Cylinder leakage; 6. Carbon buildup in the engine; 7. Incorrect ignition timing. The exhaust pipe is part of the engine's exhaust system, which includes the front exhaust pipe and rear exhaust pipe. The exhaust system is responsible for discharging the waste gases produced during engine operation while reducing pollution and noise from the exhaust. It consists of the exhaust manifold, catalytic converter, exhaust temperature sensor, car muffler, and tailpipe.

18

0

Share

What are the consequences of insufficient washer fluid?

Insufficient washer fluid does not harm the car. The introduction and performance of windshield washer fluid are as follows: Introduction to windshield washer fluid: Commonly known as automotive windshield washer fluid, it is a consumable in car usage. High-quality automotive windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It is commonly referred to as windshield washer fluid. Performance of windshield washer fluid: Cleaning performance: Windshield cleaner is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. Antifreeze performance: The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, thus providing antifreeze protection.

11

4

Share

Where is the Ruimai engine produced?

Ruimai engines are produced by Shenyang Aerospace Mitsubishi Automotive Engine Manufacturing Co., Ltd., and another source is the Italian VM Motori company. Below are the methods for engine maintenance and precautions for using the engine: Methods for engine maintenance: Maintain good crankcase ventilation. Most gasoline engines are equipped with a PCV valve, but contaminants from blow-by gases can deposit around the PCV valve and potentially clog it. It is necessary to regularly clean the contaminants around the PCV valve; Regularly change the oil and filter, adjust oil change intervals based on usage conditions, and ensure the oil level is appropriate; Periodically clean the crankcase; Use lubricating oil of appropriate quality grade. Precautions for using the engine: Fuel must be clean; Select the correct fuel type; Refuel in a timely manner; Do not disconnect electrical equipment circuits when the ignition switch is on; Regularly clean the fuel system and intake system.

18

3

Share

Are New Cars Always Filled with Fuel?

New cars do not need to be filled with fuel. The following are precautions for the break-in period of a new car: Avoid high-speed driving: Try not to let the car's speed reach 120km/h, as this can help maintain the engine's performance and prolong its lifespan. Avoid overloading: Placing excessively heavy objects in the car during the break-in period undoubtedly puts pressure on the vehicle. Overloading often requires frequent gear changes, and the constant shifting between high and low gears can be very detrimental to the engine. Avoid driving on extremely poor road conditions: Driving on very rough roads during the break-in period causes significant tire wear. Moreover, prolonged driving under such conditions with the engine constantly operating at high power is bound to cause damage.

1

2

Share

What Causes a Gasoline Generator to Automatically Shut Down?

Gasoline generator automatic shutdown reasons are no fuel, fuel line blockage, excessive body temperature, or excessive load. The maintenance methods for the generator are as follows: 1. Daily maintenance: (1) Check the diesel generator work log. (2) Inspect the diesel generator: oil level, coolant level. (3) Daily check for any damage or leaks in the diesel generator, and whether the belt is loose or worn. 2. Weekly maintenance: (1) Repeat the daily A-level diesel generator inspection. (2) Check the air filter, clean or replace the air filter element. (3) Drain water or sediment from the fuel tank and fuel filter. (4) Inspect the filter. Check the starting battery.

14

5

Share

Is the Jetta automatic transmission made by Aisin?

How to Walk Around the Vehicle in the Subject 3 Driving Test?

What Causes Black Smoke from a Car's Exhaust Pipe?

What are the consequences of insufficient washer fluid?

Where is the Ruimai engine produced?

Are New Cars Always Filled with Fuel?

What Causes a Gasoline Generator to Automatically Shut Down?

Do You Need to Press the Clutch When Shifting Gears in a Manual Transmission Car?

How to Identify an Imported Isuzu Engine?

How to turn off ESP in a car?

What is the engine speed during semi-engagement?