Is the Jeep Compass Fuel Consumption High?

1 Answers
DiArthur
07/29/25 10:00pm
The comprehensive fuel consumption of the Jeep Compass ranges from 6.0-7.6L/100km. Currently, there are 7 models of the 2021 Jeep Compass available for sale. The automatic comfort version has a comprehensive fuel consumption of 6.0L/100km; the automatic luxury version is 6.3L/100km; the automatic four-wheel-drive high-performance flagship version is 7.6L/100km; the automatic four-wheel-drive elite version and the automatic four-wheel-drive 80th anniversary edition both have a comprehensive fuel consumption of 7.3L/100km; the automatic elite version and the automatic leading version have a comprehensive fuel consumption of 6.2L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 5.7-9.3L/100km. The specific factors affecting a car's fuel consumption are as follows: Car weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load), while an SUV weighing about 1.5 tons consumes around 8.5 liters. Different weights lead to varying fuel consumption. Air resistance: Higher air resistance increases fuel consumption during driving. Cars with better aerodynamics have lower air resistance, resulting in lower fuel consumption. Economical RPM: The engine has a most economical torque output point during driving. Maintaining the car's speed within this torque output point can significantly reduce fuel consumption. Typically, small-displacement cars achieve this at around 70 km/h, while larger-displacement cars reach it at about 100 km/h. Staying within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption.
Was this review help?
5
1
Share
More Forum Discussions

What to Do When the Car AC Has Normal Low Pressure but Low High Pressure?

When a motor vehicle's air conditioning system shows normal low pressure but low high pressure, it is typically caused by a malfunctioning AC compressor. In such cases, the AC compressor needs to be inspected and repaired. If repair is not possible, replacement is necessary. After replacing the compressor, refrigerant must be replenished before the system can be used. Relevant information about the intercooler is as follows: 1. Introduction: The intercooler is essentially a supporting component for turbocharging and is generally only found in vehicles equipped with a turbocharger. 2. Function: Its role is to reduce the temperature of the compressed air, thereby lowering the engine's thermal load, increasing air intake, and consequently boosting the engine's power.
11
3
Share

Is it necessary to touch up the paint if the bumper is chipped?

It is not necessary to touch up the paint if the bumper is chipped. Additional information is as follows: 1. Reasons why touch-up is unnecessary: The bumper itself is made of plastic and will not rust. If the area of chipped paint is too small, there is no need to touch it up. You can wait until there are more scratches or until the bumper needs to be replaced. 2. There are two scenarios for vehicle paint scratches: Minor scratches without exposed metal: It is recommended not to touch up the paint, as doing so requires removing the existing paint, which may result in color mismatch with the surrounding paint, making the effort not worthwhile. Although minor scratches may look unsightly, they do not affect the vehicle's performance or safety. Severe scratches with exposed metal: In this case, touch-up is mandatory. Failing to do so will lead to localized rusting of the metal body. After exposure to rain, the rusted area will expand, and once the metal rusts through, the entire body panel will need to be replaced. Otherwise, the vehicle may develop leaks, and the rust will worsen over time, leading to increasingly higher repair costs.
4
4
Share

What does it mean to service the ESC?

Servicing the ESC indicates that there is an issue with the vehicle's Electronic Stability Control system. The Electronic Stability Control system plays a significant role in vehicle operation by preventing understeering. The Electronic Stability Control system works in conjunction with the vehicle's Anti-lock Braking System (ABS), Brake Assist System, and Acceleration Slip Regulation. Relevant information about ESP is as follows: 1. Introduction: The Electronic Stability Program (ESP) is the abbreviation for Electronic-Stability-Program, translated as "Electronic Stability Program" in Chinese. The function of the ESP system is to monitor the vehicle's driving status and prevent the vehicle from deviating from the ideal trajectory when understeering or oversteering occurs during emergency obstacle avoidance or turning. 2. Characteristics of ESP: The most important characteristic of ESP is its proactiveness. While ABS reacts passively, ESP can prevent problems before they occur.
6
2
Share

What is this car with a Mercedes front and Maybach rear?

Mercedes-Benz cars with the Maybach logo are the Maybach S-Class, which is essentially the plus version of the Mercedes S-Class. The Maybach S-Class is larger, more luxurious, more expensive, and more powerful than the Mercedes S-Class. The Maybach S-Class has a length of 5466 mm, a width of 1899 mm, a height of 1500 mm, and a wheelbase of 3365 mm. Relevant information about car logos is as follows: 1. Introduction: "Car logo" is the abbreviation for automobile emblems, referring to the logos of various car brands, which often represent the automobile manufacturers. Car logos include: the car's trademark or factory logo, product labels, engine model and serial number, vehicle model and serial number, and vehicle identification code, etc. 2. Car logos must not be altered arbitrarily: Arbitrarily changing car logos violates the "Motor Vehicle Management Regulations": The car logo must match the vehicle model and is not allowed to be misused. Once discovered, it will be dealt with according to the national regulations on the technical conditions for the safe operation of motor vehicles.
20
2
Share

What is the Audi A6L 48V Mild Hybrid?

Here is a detailed explanation of the 48V mild hybrid system: The "48V mild hybrid," abbreviated as MHEV, involves upgrading the traditional 12V circuit voltage to 48V and replacing the conventional starter and alternator with a BSG (Belt-Driven Starter Generator) and a 48V/12V bidirectional DC/DC converter. Basic principles of the 48V mild hybrid system: At the mechanical definition level, the 48V mild hybrid system is not classified as a new energy vehicle because it cannot independently provide electric power for pure electric driving. In daily use, the electrical energy is only used to assist in vehicle propulsion. On the basis of the traditional 12V electrical system, the voltage is increased to 48V, and with the addition of components such as an electric motor and battery pack, it achieves the effects of assisting vehicle propulsion and storing/recovering electrical energy.
15
5
Share

Should I Use Grease or Engine Oil for the Chain?

Check if there is an oil box. If there is, use engine oil, as the chain passes through the oil box for lubrication. If not, grease is a better option. Next, consider the size and length of the chain. For larger chains, such as those above RS100 or longer than 1 meter, use engine oil. For smaller chains, grease is preferable. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of base oil and additives. The base oil is the main component, determining the fundamental properties of the lubricant, while additives compensate for and enhance the performance of the base oil, providing additional functionalities. Additives are an essential part of lubricants.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.