Is the Jeep Cherokee a domestic car?

1 Answers
BenjaminLynn
07/24/25 6:53am
Jeep Cherokee is not a domestic car. It is a compact urban SUV jointly produced by GAC Group and Fiat Chrysler Automobiles in China, making it a joint venture vehicle. The dimensions of the Jeep Cherokee are 4649mm in length, 1859mm in width, and 1686mm in height, with a wheelbase of 2705mm. The Jeep Cherokee features a new aerodynamic exterior design, an interior inspired by the "Sanctuary" concept, and offers drivers four driving modes: Auto, Sport, Snow, Sand/Mud, and Rock, along with a more advanced connected human-machine interaction system. The interior adopts a driver-oriented design, and owners can also opt for additional features such as a heated leather steering wheel. Depending on the configuration, the dashboard of the new car comes with either a 3.5-inch monochrome or a 7-inch color LCD screen.
Was this review help?
3
3
Share
More Forum Discussions

How to Eliminate the Tire Pressure Warning in Lavida?

Lavida tire pressure warning elimination method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "dong" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure warning elimination. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Generally, a warning will be triggered if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. At this time, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new component is possible.
12
1
Share

What is the Head-Up Display in a Car?

Automotive head-up display (HUD) projects important driving information such as speed and navigation onto the windshield in front of the driver, allowing the driver to view crucial driving data without lowering or turning their head. Below is relevant information about HUDs: 1. Product Types: HUDs are mainly categorized into suspended HUDs and dashboard-mounted HUDs, differentiated by their mounting methods. 2. Product Function: HUDs can project current speed, navigation, and other information onto the photoelectric display device on the windshield, creating an image in front of the glass. This enables drivers to view navigation and speed information without turning or lowering their heads.
19
4
Share

How to Adjust the Optimal Position for Left and Right Rearview Mirrors?

The methods for adjusting the left and right rearview mirrors are as follows: 1. Left rearview mirror: The driver should use the horizon as a reference, adjusting the vertical angle so that the mirror shows an equal split between sky and ground. Then, adjust the horizontal angle so that the car body occupies about one-fourth of the mirror's surface. Note that adjustments should be made based on the driver's seating position, not by leaning closer to the mirror. 2. Right rearview mirror: Since the right rearview mirror is farthest from the driver's position, it's advisable to minimize the space occupied by the sky, leaving more room for the side of the car body. Therefore, the sky should occupy only one-fourth of the right rearview mirror, and the car body should also occupy one-fourth.
6
2
Share

Can the car battery be charged directly in the vehicle?

The car battery can be charged directly in the vehicle using a charger. Here are the specific details about car batteries: 1. Function: The battery's role is to store electrical energy. Without the battery, the car cannot operate normally. 2. Charging while driving: The battery can be charged by the alternator while the car is running. If the car is parked for a long time, it can easily lead to battery drain, causing the car to fail to start. Therefore, during long-term parking, it is best to start the vehicle at least once a week for more than 5 minutes to charge the battery. 3. Charging precautions: Generally, it takes 4-5 hours to fully charge the battery, and overcharging should be avoided.
14
1
Share

What are the specific power parameters of the Volkswagen Polo?

Volkswagen Polo is equipped with a 1.5L naturally aspirated engine, with a maximum power of 83kw and a maximum torque of 145 Nm. The following is a related introduction about Volkswagen Polo: 1. Power advantage: The engine model equipped in Volkswagen Polo is EA211, which is an all-aluminum environmentally friendly engine. During operation, the engine maintains high torque at low speeds, making the power output smoother. 2. Introduction: Volkswagen Polo was born in 1975. In the following 30 years, it has gone through five generations of product evolution, with a total production of more than 7 million units. It has long been ranked first in sales of economical small cars in Germany and is known as the "magic boy" of Volkswagen Germany. For a long time, Polo has also been regarded as the standard for reliability, comfort and safety in economical small cars.
14
2
Share

What are the regulations for rear passengers wearing seat belts?

Rear passengers are required to wear seat belts. Article 51 of the Road Traffic Safety Law of the People's Republic of China stipulates that when a motor vehicle is in motion, both the driver and passengers must use seat belts as required. The performance of car seat belts is as follows: 1. Seat belt design elements: The design of seat belts should meet the requirements for occupant protection performance, reminders to use seat belts, as well as comfort and convenience. The design measures to achieve the above points include the selection of the seat belt adjuster position, the specifications of the seat belt, and the auxiliary devices used. 2. Occupant protection performance: The occupant protection performance requirements for car seat belts are as follows: Restrain the occupant as early as possible; Minimize the pressure on the occupant during restraint; Maintain the restraint position unchanged to avoid applying force to the more vulnerable parts of the human body. As a means to achieve the above objectives, the use of pre-tensioners and load limiters mentioned above significantly improves these performance aspects.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.