Is the JE4D25Q6A Durable?

3 Answers
MacFinley
07/23/25 5:39pm
JE4D25Q6A engine is durable. It is a power system developed based on the Italian VM technology platform. Here is an introduction to engine maintenance: Difficulty in cold engine start: The main reason for difficulty in cold engine start is that the engine temperature is too low. Therefore, as long as the engine is kept warm and the biting cold wind is prevented from directly blowing into the engine compartment, the issue of the engine not starting can be avoided. Therefore, when parking in winter, pay attention to the direction of the car's front. It is best to have the car's front facing a building, using the building to block the wind and prevent the engine from being excessively cooled by the cold wind. Engine stalling during gear shifting: Engine stalling during gear shifting may be due to the idle speed being too low at that time, or the idle cut-off valve not being tightened, or it may be caused by the gear being too high, or the oil-gas separator being severely clogged. Generally, first gear should be used when starting. Check whether the idle cut-off valve is tightened and whether the plug is securely connected. At the same time, it is best to go to a designated service station to clean the oil-gas separator.
Was this review help?
3
1
Share
Annabeth
08/10/25 1:21pm
I've been using the JE4D25Q6A battery in my car for several years, and it's quite durable. It lasted nearly six years in my vehicle before needing replacement. In the past, standard models would typically fail within three years at most, but this one is different—it's specifically designed for start-stop vehicles with excellent vibration resistance. Even with dozens of start-stop cycles daily in city traffic, it performs flawlessly. During northern winters at -20°C, it starts up instantly, which is really reassuring. However, driving habits matter—avoid frequent short trips to keep the alternator functioning properly, and maintain voltage within the optimal range. Once, during a long road trip through extremely hot areas where the car interior felt like a sauna, the battery held up just fine. Overall, it offers great value for money—slightly pricier but worth it. Spending a few minutes each month cleaning the battery terminals to prevent corrosion can extend its lifespan. Honestly, I find it very reliable.
Was this review help?
1
1
Share
Expand All
Javier
09/22/25 7:52am
Structurally, the JE4D25Q6A incorporates glass fiber materials to securely fix the electrolyte, preventing any movement, which enhances durability—unlike older batteries prone to leakage or bulging. In my experience, it reliably lasts five years under normal use, especially demonstrating stability in frequent start-stop system operations and recovering well from multiple deep discharges. Minimal voltage fluctuation is key, with the generator ideally maintaining 14.4 volts; exceeding this can cause damage. Secure installation is crucial to avoid severe vibrations, though the AGM design inherently offers better shock resistance. Regularly testing the charging status is essential—I use an onboard monitoring tool to prevent surprises. Its cold-cranking performance is robust, but storing it in a shaded, cool area in southern high temperatures can extend its lifespan by several more years.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Will not renewing OnStar affect the car?

Not renewing OnStar will affect the car. The impact of not renewing OnStar is that the owner cannot enjoy some services, such as navigation, manual unlocking, and other practical functions. The following are the functions of OnStar: Automatic Crash Response: When the built-in collision sensors in the vehicle detect a collision or airbag deployment, an alert is automatically sent to the command center. A professional advisor will then contact the vehicle via voice. If there is no response from the vehicle, the advisor will use GPS to locate the vehicle and notify rescue services, helping rescuers find the vehicle as quickly as possible to save valuable time. Additionally, OnStar can provide a crash report based on data collected during the collision, including the vehicle's speed at the time of impact, whether the airbags deployed, the location of the impact, whether the vehicle rolled over, etc. This helps rescuers assess the potential injuries of the occupants and expedite rescue efforts. It also aids relevant authorities in analyzing the cause of the accident, similar to an aircraft's "black box." Automatic Airbag Deployment Assistance: When the airbags deploy, OnStar receives the signal and contacts the owner. Good Samaritan Assistance: If you witness a traffic accident or an injured pedestrian, you can press a button to request OnStar assistance. Similarly, if the owner encounters a traffic accident or injured individuals while driving, they can press a button to request OnStar's help. Roadside Assistance: In case of sudden illness or emergency, the owner can press the red button, and the command center will use GPS to locate the vehicle and provide timely assistance. Stolen Vehicle Tracking: The OnStar system includes a stolen vehicle tracking feature. If the owner reports the vehicle as stolen to the command center, OnStar can use GPS to locate the stolen vehicle and assist the police in recovering it.
14
5
Share

What Causes the Humming Sound When Driving at Low Speed?

Vehicle driving with a humming sound is mainly caused by the following reasons: 1. Excessive tire pressure causing abnormal noise. During daily use, the tire pressure should be adjusted within the standard range (generally 2.3bar-2.5bar). If the tire pressure is too high, it will cause severe wear on the tire tread, reduce the tire's shock absorption and cushioning performance, and significantly increase tire noise. 2. Abnormal tire wear causing noise. The tire tread comes into contact and friction with the ground. If the tread wears unevenly with bumps, it will produce a humming sound. 3. Damaged wheel hub bearing causing noise. Worn wheel hub bearings will produce a humming sound, mainly due to long-term use leading to wear and looseness. During daily use, avoiding severe impacts on the wheels and prolonged water exposure can help protect the wheel hub bearings.
8
5
Share

Which Mercedes-Benz models feature frameless doors?

Mercedes-Benz models with frameless doors include the S65 AMG, AMG GT, SL-Class, GLA-Class, CLS-Class, and E-Class Coupe. Below are the advantages of frameless doors and how to properly close them: Advantages of frameless doors: Excellent sealing effect and enhanced safety. Frameless doors provide superior sound insulation. When opening, the window automatically lowers by 0.5 cm, and when closing, it rises to secure the seal. The sealing strip is installed on the car body, ensuring good sealing performance. How to close frameless doors: When closing a frameless door, push the door itself, not the window glass. The design of frameless doors differs from conventional doors. The opening and closing system of frameless doors automatically lowers the window by 0.5 cm when opening and raises it to secure the seal when closing.
17
4
Share

What are the seven-seater Mercedes-Benz commercial vehicles?

Mercedes-Benz seven-seater commercial vehicles include the Mercedes-Benz R-Class, Mercedes-Benz V-Class, and Mercedes-Benz Vito. The Mercedes-Benz R-Class is powered by a 3.0-liter V6 turbocharged engine, paired with a 7-speed automatic transmission, delivering a maximum power of 200 kW and a maximum torque of 400 Nm. The currently available model of the Mercedes-Benz V-Class is only the V260, all of which feature a seven-seat layout. The V260 measures 5140 mm in length, 128 mm in width, and 1880 mm in height, with a wheelbase of 3200 mm. The high-end version has a length of 5370 mm and a wheelbase of 3430 mm. The Mercedes-Benz Vito is an MPV launched by German Mercedes-Benz, featuring a "simple and elegant" design style. The new eagle-style headlights replace the previous teardrop shape, exuding elegance and sharpness.
17
5
Share

How to Use the One-Button Start in a Mercedes-Benz?

Usage of the one-button start in a Mercedes-Benz: 1. After the driver sits in the driver's seat, press the start button once, at which point the ACC light will turn on; then press it once more, and the vehicle will perform a self-check. 2. Depress the brake pedal and press the one-button start to ignite and start the engine. 3. Press the brake pedal again, shift to D gear, and release the handbrake. 4. Gradually release the brake pedal, gently press the accelerator, and the vehicle will start moving. Precautions for the one-button start system: 1. When installing the wiring harness, note that the ignition switch has three commonly used positions besides OFF: ACC, ON, and START. 2. The button can be installed either on the panel or in the original keyhole, depending on the owner's preference. Mercedes-Benz is a German automotive brand renowned for its luxury and high performance, headquartered in Stuttgart, Germany, and is a member of the Daimler AG group.
1
4
Share

Where is the tire pressure monitoring on the Haval H6?

The tire pressure monitoring of the Haval H6 can be viewed on the dashboard. The tire pressure monitoring system can automatically monitor various conditions of the tires in real time by recording the rotation speed of the tires or through electronic sensors installed in the tires, providing effective safety assurance for driving. Common tire pressure monitoring methods: Direct tire pressure monitoring uses wireless transmitters to send pressure information from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect tire pressure monitoring compares the differences in rotation speed between tires to monitor tire pressure. The Tire Pressure Monitoring System (TPMS) is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Daily tire pressure precautions: Most cars are equipped with a tire pressure monitoring system that alerts drivers to tire leaks and abnormal tire pressure to ensure driving safety. It is important to pay attention to the tire pressure monitoring light on the dashboard, as both excessively low and high tire pressure can affect driving performance and increase tire wear.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.