Is the JAC X8 from JAC Motors or JAC Volkswagen?

1 Answers
OAshlyn
07/29/25 6:06pm
The JAC X8 belongs to JAC Volkswagen. Here are the detailed specifications of the JAC X8: 1. Vehicle Positioning: The JAC X8 is the first fuel-powered vehicle under the JAC brand and the first SMV model in China. Its dimensions are 4815/1870/1758mm (length/width/height) with a wheelbase of 2830mm. 2. Powertrain: It is equipped with a 1.5TGDI second-generation direct-injection engine, delivering a maximum power of 135KW and a peak torque of 300Nm. The maximum torque is achieved at 1800rpm, enabling a 0-50km/h acceleration in 5.2 seconds. It is paired with either a 6-speed manual transmission or a DCT dual-clutch automatic transmission.
Was this review help?
12
1
Share
More Forum Discussions

How to Add Refrigeration Oil to the Air Conditioning Compressor?

There are mainly three methods for adding refrigeration oil to the compressor. The following are the methods for adding refrigeration oil to the compressor: 1. Direct Addition: Add directly from the compressor. First, perform an oil return operation, which means running the compressor at idle speed with the control system set to the coldest and highest fan speed for 20-30 minutes to allow the oil to return to the compressor. Then, turn off the engine, release the refrigerant, remove the compressor from the vehicle, drain the old oil, and directly add or replenish new oil. 2. High-Pressure Side Addition: Add from the high-pressure side. Evacuate to 98 kPa, close the high-pressure side manual valve, and close the compressor service valve. Remove the high-pressure side hose from the pressure gauge head and insert it into the refrigeration oil. Open the service valve, and the refrigeration oil will be drawn into the system. Close the service valve immediately when the oil is almost fully drawn. 3. Low-Pressure Side Addition: No service valve is required. After evacuating to 98 kPa, close the low-pressure side manual valve and continue evacuating with the vacuum pump while keeping the high-pressure side manual valve open. Remove the low-pressure side hose from the pressure gauge head and insert it into the refrigeration oil to draw the oil. After drawing, reattach the hose to its original position, open the low-pressure side manual valve, and continue evacuating. Once evacuation is complete, proceed with the refrigerant charging operation.
14
0
Share

Is the Chevrolet Cruze Really That Prone to Breaking Down?

The Chevrolet Cruze is indeed prone to breaking down, and it is the undisputed champion in terms of overall failure rates. Common issues with the Cruze: Faults primarily occur in core systems such as the brakes, transmission, and engine, as well as in the exterior, interior, and trim. The newer models have introduced a dual-clutch transmission, but this transmission suffers from severe jerking and significant noise. Oil leakage from the engine cover is also one of the major common problems with the Cruze. After-sales service for the Cruze: The after-sales service for the new Cruze has also been criticized by consumers. Firstly, the replacement of split keys for owners is not handled adequately, and secondly, even after using synthetic oil, owners are still required to service the vehicle every 5,000 kilometers.
7
2
Share

How many kilometers can a BYD Qin Plus run on a full tank of fuel?

BYD Qin Plus can run approximately 1,200 kilometers on a full tank of fuel, and its fuel consumption is relatively low. Correct fuel consumption calculation formula: Fuel consumed ÷ Distance traveled × 100 = Fuel consumption per 100 kilometers. The data on fuel consumed is relatively difficult to obtain. Generally, a full tank is used as the initial data. After traveling a certain distance, the tank is filled again, and the fuel amount provided by the gas station is taken as the final data. Fuel-saving tips: Idling for more than 1 minute consumes the same amount of fuel as starting the engine once. The fuel consumed by idling the engine for 5 minutes can allow the car to travel more than 1 kilometer.
2
3
Share

What causes the Volvo XC60 to display low tire pressure?

Volvo XC60 displays low tire pressure for the following reasons: Damaged car tire: When a car tire is damaged, it will inevitably leak air, and over time, the tire pressure will drop. If a car tire is damaged, it must be repaired or replaced promptly to prevent safety hazards. There are many methods for repairing tires, including hot patching, mushroom nail method, and rubber patch method. If the tire is severely worn, it is best to replace it with a new one directly. After replacing the new tire, a four-wheel alignment should be performed promptly to prevent the vehicle from pulling to one side. Slow tire air leakage: There are many reasons for slow tire air leakage, including natural aging of the tire and the vehicle being parked for too long. When parking the car for an extended period, it should be placed on a flat and hard surface to prevent the tires from being deformed due to prolonged pressure. Additionally, if the car is not driven for a long time, it should be started at least once a week to ensure the fluids in the engine and the battery can function properly.
10
3
Share

How Much Horsepower Does the BMW 530 Have?

BMW 530 has 184 horsepower, with an official 0-100 km/h acceleration time of 8.4 seconds. Horsepower Calculation Method: The horsepower of a car refers to the unit of engine power, generally referring to metric horsepower rather than imperial horsepower. This unit is typically used for engines or automobiles and can be calculated through a formula, which requires adjustments. The horsepower of a car is derived from torque, and the calculation formula is power (W) = 2π × torque (N-m) × speed (rpm)/60. Power Calculation from Torque: The calculation formula is power (W) = 2π × torque (N-m) × speed (rpm)/60. After simplification, the formula becomes power (kW) = torque (N-m) × speed (rpm)/9549, from which the car's horsepower is calculated.
7
0
Share

Can BYD Vehicles Use the 'Thousand-Mile Eye' Function While Driving?

BYD vehicles can use the 'Thousand-Mile Eye' function while driving. BYD Company Limited was established in 1995. How to Use the Thousand-Mile Eye: First, you need to control it through the mobile app. After activating the Thousand-Mile Eye function, it will remotely display the vehicle's video feeds, including the dashcam footage, the external panoramic view, and the internal cabin view, allowing you to monitor every move of the vehicle in detail. Functions of the Thousand-Mile Eye: After enabling the 'Eagle Eye' feature, car owners can instantly check the vehicle's status, including interior cabin footage, external panoramic views, and dashcam recordings.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.