···
Log in / Register

Is the ix35 compliant with China 6 emission standards?

3 Answers
Ortiz
07/29/25 4:27pm
ix35 is not compliant with China 6 emission standards; this vehicle meets the China 5 emission standard. The ix35 is a compact SUV under Beijing Hyundai, with a body size of 4500mm in length, 1850mm in width, and 1715mm in height, a wheelbase of 2640mm, a minimum ground clearance of 163mm, and a body structure of a 5-door, 5-seat SUV. The ix35 is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, and has a top speed of 188 km/h. The engine features an aluminum alloy cylinder head, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
Was this review help?
3
0
Share
OMax
08/14/25 5:28am
As an owner who recently researched the emissions of the Hyundai ix35, whether it meets China 6 standards depends on the specific year. Models produced after 2020 generally comply with China 6 standards, meaning lower emissions, better environmental performance, and a more worry-free driving experience. Older models like those from 2018 might still adhere to China 5 standards, so be sure to check the vehicle certification or environmental label before purchasing a used ix35. China 6-compliant models have slightly higher fuel requirements, necessitating the use of high-quality, low-sulfur gasoline to protect the three-way catalytic system, and they also offer simpler daily maintenance. Driving my 2021 ix35 on the road, I genuinely feel smooth power delivery and even enjoy some urban traffic restriction benefits, making it a must-have for eco-conscious drivers.
Was this review help?
19
0
Share
Expand All
LeElliot
10/12/25 7:54am
As a car enthusiast, I'm quite familiar with the ix35. Is it China 6 compliant? The new models from 2020 onwards all meet the China 6b standard, with upgraded engines for better emission control. Driving a China 6 compliant car has many benefits, such as easier annual inspections and fuel savings due to better fuel efficiency. However, it's important to note that pre-2019 models may only meet the China 5 standard, so checking the VIN code when purchasing is essential. A mechanic friend mentioned that China 6 models have more sensors but lower failure rates, making them more cost-effective in the long run. I often take my 2020 ix35 on long trips now, equipped with a high-efficiency air filter for cleaner air inside.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Volkswagen 1.4T Golf?

Golf 1.4T's actual fuel consumption is around 8L/100KM, while the official combined fuel consumption is 5.6L/KM, with a normal fluctuation range of ±10%. Below is relevant information about fuel consumption: Factors affecting fuel consumption: Environmental road conditions, climate conditions, individual driving habits, vehicle load differences, etc. Using air conditioning in the car is also a primary factor for higher fuel consumption. Driving with the air conditioning at maximum setting consumes 5-25% more fuel than when it's turned off. Calculation formula: Calculating a car's fuel consumption means determining the fuel consumption per 100 kilometers, which is obtained by dividing the actual fuel consumption by the actual distance traveled. The calculation formula is: Fuel consumption per 100 kilometers equals fuel consumption (liters) divided by distance traveled (kilometers) multiplied by 100.
15
4
Share

What is the fuel consumption of the Volkswagen Teramont 4WD?

2.0t 4WD version of the Teramont has a combined fuel consumption of approximately 11 liters per 100 kilometers, while the 2.5t 4WD version consumes about 11.7 liters per 100 kilometers. Below is the relevant introduction of the Teramont: Powertrain: The Teramont is a mid-to-large-sized SUV under Volkswagen, equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. Only models equipped with the high-power version 2.0-liter turbocharged engine and the 2.5-liter turbocharged engine are 4WD, while models with the low-power version 2.0-liter turbocharged engine are front-wheel drive. On-Demand 4WD Technology: The Teramont features on-demand 4WD technology, with its 4WD models using a multi-plate clutch-type central differential. Vehicles with on-demand 4WD technology primarily operate in front-wheel drive under normal conditions, and only when the front wheels slip will power be distributed to the rear wheels. Therefore, SUVs with on-demand 4WD have better off-road capability and traction than typical front-wheel-drive SUVs, but their fuel consumption is similar to that of front-wheel-drive SUVs. On-demand 4WD systems are also commonly found in some 4WD sedans. Generally, vehicles equipped with on-demand 4WD systems are those with transversely mounted engines, while vehicles with longitudinally mounted engines usually come with full-time 4WD or part-time 4WD systems.
11
4
Share

What kind of glue is used to attach a rearview mirror?

If the rearview mirror in your car falls off, you can use special rearview mirror adhesive to reattach it, such as AB glue, glass glue, strong double-sided tape, or mirror base glue, which is specifically designed for automotive glass rearview mirrors. Alternatively, you can use UV glue. Rearview mirrors are divided into internal and external types, and the detachment points vary. If the interior rearview mirror detaches from the windshield joint, high-strength transparent adhesive should be used, which can be found at 4S shops or glass repair shops. However, if the adjustment ball joint of the rearview mirror or the lens or housing of the external rearview mirror falls off, it needs to be replaced promptly. Commonly used AB glue for rearview mirrors on the market consists of two components, A and B, which must be mixed before use. Some types of AB glue take a long time to fully cure. If the mirror cannot be reattached with glue, a suction cup rearview mirror can be used. This type does not require adhesive on the back of the mirror; it simply uses a suction cup to attach to the glass. Glass glue is a material used to bond and seal various types of glass to other substrates. It is mainly divided into two categories: silicone glue and polyurethane glue (PU). Silicone sealant, commonly referred to as glass glue, comes in acidic and neutral varieties. Neutral glue is further categorized into stone sealant, mildew-resistant sealant, fireproof sealant, and pipe sealant. Strong double-sided tape can also be used. There is specialized double-sided tape for rearview mirrors, which only requires peeling off the protective paper on both sides. However, it is essential to remove any residual adhesive from the rearview mirror first. Additionally, if you plan to hang objects, make sure to check the weight capacity of the tape; otherwise, it may fall off again soon. UV glue, also known as photosensitive adhesive or ultraviolet curing adhesive, is a type of adhesive that only cures under ultraviolet light exposure. It can be used as a bonding agent or as a base for paints, coatings, and inks. "UV" stands for ultraviolet rays. Ultraviolet (UV) light is invisible to the naked eye and is a segment of electromagnetic radiation beyond visible light, with wavelengths ranging from 10 to 400 nm. The curing principle of UV glue involves photoinitiators (or photosensitizers) in the UV-curable material absorbing UV light to generate active free radicals or cations, triggering polymerization and cross-linking reactions. This transforms the adhesive from liquid to solid within seconds. During the application process, UV glue must be exposed to UV light to cure. This means the photosensitizer in the glue reacts with monomers upon UV exposure. Theoretically, without UV light, the glue will not cure. The function of a rearview mirror is to reflect the conditions behind, beside, and below the vehicle, expanding the driver's field of vision and reducing the likelihood of safety incidents. Rearview mirrors are categorized by installation location: interior rearview mirror, exterior rearview mirror, and under-mirror.
5
2
Share

Does Using 92 Octane Gasoline in a Car Designed for 95 Octane Have Significant Effects?

Using 92 octane gasoline in a car designed for 95 octane has minimal impact, as long as the driver avoids aggressive driving and the engine does not continuously operate at high speeds above 4000 RPM. However, there will still be a slight decrease in engine performance, so drivers should try to avoid using the wrong gasoline. Below is some relevant information: 1. Gasoline Octane Rating: The octane rating of gasoline represents the ratio of the actual gasoline's anti-knock properties to those of standard gasoline. The higher the octane rating, the stronger the anti-knock performance. 2. Standard Gasoline: Standard gasoline is composed of isooctane and n-heptane. Higher octane ratings are not necessarily better; the appropriate octane rating should be selected based on the engine's compression ratio.
12
2
Share

Why Can't the BMW 5 Series Bluetooth Connect?

BMW 5 Series Bluetooth connection issues are primarily due to poor Bluetooth compatibility, system incompatibility between devices, external environmental factors affecting pairing, and interference from other electronic devices in the vehicle. Below is an introduction to Bluetooth-related information: Terminology Explanation: Bluetooth/Car Phone is designed specifically for driving safety and comfort, allowing drivers and passengers to communicate with the outside world without the need for cables or phone holders. Types of Communication Products: There are mainly two types of in-car communication products on the market: Car Phone and Car Bluetooth Hands-free System (referred to as Car Bluetooth Hands-free). The main difference between the two is that a Car Phone requires a SIM card to be inserted, whereas a Car Bluetooth Hands-free does not.
5
5
Share

What Does Japanese-Style Mean?

Japanese-style generally refers to cars produced in Japan or Japanese brand cars manufactured in other regions. Below is a partial introduction about Japanese-style: Japanese-style Cars: Japanese-style cars have gained a significant market share globally due to their high cost-performance ratio, fuel efficiency, and excellent craftsmanship. Their main brands include Toyota TOYOTA, Mazda MAZDA, Suzuki SUZUKI, etc. Japanese-style Brands: Japanese-style brands have achieved steady growth in market share because their products align with the current consumption capacity of the Chinese market, while also catering to the consumption value orientation and aesthetic preferences of Eastern people in product design.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.