···
Log in / Register

Is the Issue Date on the Vehicle License the Same as the Annual Inspection Date?

3 Answers
ColinMarie
07/29/25 10:29pm
The issue date on the vehicle license is the annual inspection date, but it is not the vehicle purchase date. Here are the relevant details: 1. Annual Inspection Date: The annual inspection time is indicated on the duplicate of the vehicle license held by the vehicle owner. There should be a sticker on the windshield, one of which is the annual inspection sticker, displaying the year and month. If unsure, you can check at the vehicle management office. For example, if the duplicate of the vehicle license states November 2018, the final deadline for the annual inspection would be November 30, 2018. 2. Vehicle Annual Inspection: This is a mandatory inspection for all vehicles that have obtained official license plates and a vehicle license. It is equivalent to an annual physical examination for the vehicle, conducted in accordance with the 'Technical Conditions for Motor Vehicle Operation Safety.'
Was this review help?
11
3
Share
OHaven
08/15/25 11:19pm
I've been driving for over a decade and initially mistook the issuance date on the vehicle license as the annual inspection deadline, which almost caused me to miss a check. Actually, the issuance date marks when the vehicle was first registered or the document was replaced, and has nothing to do with annual inspections. The inspection date is determined by the vehicle type and years in service—for example, new cars might be exempt for the first two years, after which they must be inspected annually at designated stations. From my own experience, the key date is the inspection validity deadline printed on the back of the vehicle license. I always set a reminder in my phone calendar ahead of time to avoid late fees or accidents. Regular maintenance of safety components like lights and brakes can reduce the risk of issues during inspections and make driving safer. In short, don’t confuse these two dates—developing a habit of checking them regularly is crucial.
Was this review help?
18
2
Share
Expand All
SanConnor
10/18/25 3:12am
Auto repair shops have helped many people solve such issues, as it's common for owners to mistake the vehicle license issuance date for the annual inspection date. The issuance date merely indicates registration records, while the inspection deadline is typically marked in the 'Inspection Validity' section or can be checked via apps. The actual inspection schedule depends on vehicle usage - for instance, new cars require annual on-site inspections starting from the 6th year after registration. Confusing these dates may lead to overdue inspections, affecting insurance validity or resulting in fines, while also increasing road risks. I recommend owners perform basic checks (tires, lights, etc.) every six months and cross-verify with their license to confirm inspection timelines. This proactive approach helps detect issues early, avoiding emergency repairs. Developing such habits maintains better vehicle condition, ensuring both cost-efficiency and safety.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Which country does Peugeot come from?

Peugeot comes from France, and its models include the Peugeot 308, Peugeot 4008, Peugeot 508, Peugeot 301, Peugeot 308s, etc. Taking the Peugeot 4008 as an example, its body dimensions are: 4510mm in length, 1850mm in width, 1628mm in height, with a wheelbase of 2730mm, a fuel tank capacity of 53 liters, a luggage compartment capacity of 461 liters, and a curb weight of 1492kg. The Peugeot 4008 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L turbocharged engine, delivering a maximum horsepower of 167PS, a maximum power of 123kW, and a maximum torque of 245Nm, paired with a 6-speed automatic transmission.
7
5
Share

How Long Does It Take to Replace a Clutch?

Replacing a clutch takes 2 to 3 hours. Precautions during the clutch replacement process: 1. When removing or installing the clutch cover, use special tools to secure the flywheel and make alignment marks. Tighten the bolts in stages during installation. 2. During installation of the driven disc, position the damper backward and apply a small amount of grease to the splined hub. 3. Insert a special tool or the transmission input shaft into the central splined hub and the guide bearing of the transmission input shaft to prevent the clutch disc from falling. 4. Use a special tool or the transmission input shaft to align the driven disc with the guide bearing of the transmission shaft during installation. 5. If there is lubricating oil or grease on the clutch surface or pressure plate during installation of the clutch cover components, wipe it clean with a cloth.
2
4
Share

What is the minimum ground clearance of the 2019 Honda CR-V?

The minimum ground clearance of the 2019 Honda CR-V is 137mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the ground when the car is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as stones without collision. The dimensions of the 2019 Honda CR-V are: length 4550mm, width 1820mm, height 1682mm, with a wheelbase of 2661mm, a fuel tank capacity of 53 liters, and a curb weight of 1506kg. The 2019 Honda CR-V features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 142PS, a maximum power of 243kW, and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
4
1
Share

What are the reasons for the radar not making sound in the Hongqi H5?

The reasons for the radar not making sound in the Hongqi H5 are: 1. The power cable of the main unit is not properly connected, resulting in no current; 2. The radar main unit cable has become loose; 3. The radar buzzer is damaged; 4. The wiring at the bumper is damaged. The working principle of the radar is that during reversing, it uses ultrasonic waves emitted by a probe installed on the rear bumper to hit obstacles and reflect infrasound waves, calculating the actual distance between the vehicle body and the obstacle. The functions of the radar are: 1. Accurately measuring the distance between the rear of the vehicle and the obstacle; 2. Emitting an urgent warning sound when reversing to the limit distance to remind the driver to pay attention to braking; 3. Repeatedly emitting a voice warning sound to alert pedestrians.
3
1
Share

How many cylinders does the Audi A8 have?

The number of cylinders in the Audi A8 varies depending on the engine displacement: 1. The 3.0L displacement engine has 6 cylinders; 2. The 4.2L displacement engine has 8 cylinders; 3. The 6.0L displacement engine has 12 cylinders. Taking the 2021 Audi A8 Comfort model as an example, it is a large 4-door 5-seater sedan with body dimensions of 5302mm in length, 1945mm in width, and 1483mm in height, with a wheelbase of 3128mm. The 2021 Audi A8 Comfort model is equipped with a 3.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 210 kW and a maximum torque of 450 Nm. It features a front-engine, four-wheel-drive layout, with both front and rear suspensions utilizing multi-link independent suspension systems.
13
3
Share

How to reset the maintenance light on the Great Wall F7?

The method to reset the maintenance light on the Great Wall F7 is as follows: Turn off the vehicle, press and hold the trip meter reset button, turn the ignition switch to the ON position, then release the reset button. The 'Service' indicator will appear on the display. Pull out the minute button on the clock, rotate it to the right, turn off the engine, and the reminder message will reset. Then turn on the ignition switch until the 'Service' indicator disappears. The Great Wall F7 is a model under the Haval brand, with body dimensions of 4620mm in length, 1846mm in width, and 1690mm in height, and a wheelbase of 2725mm. In terms of appearance, the design of the Great Wall F7 is derived from the Haval HB-02 concept car, with a more imposing overall design. The front features a hexagonal grille and is equipped with eagle-eye-style LED headlights.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.